Used Anvil Substructure for sale (258)

Condition: used, Counter bearing Make Cover Rail inside 92 mm outside 130 mm Lsdpfjctd Rhex Aa Ejhr

Condition: used, Technical details: weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Lsdju Nkw Ropfx Aa Eehr Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø Lhjdpfxopfaxuj Aa Ejr

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded Lhedodvgxijpfx Aa Eer 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Ljdevam Enjpfx Aa Eohr Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 540 mm, total length: 1,050 mm, overall weight: 10 kg, conveyor belt width: 500 mm, inner radius: 800 mm, outer radius: 1,600 mm, TAF article number: 1000005015 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 90° x 1,050 x 70 Width incl. cheek in mm: 540 Cheek height in mm: 60 Conveyor width in mm: 500 Substructure: Not available Ljdpfxswylzae Aa Eehr Curve (degrees): 90° Curve radius, inside in mm: 800 Curve radius, outside in mm: 1. 600 Idler roller Axle type: Threaded rod M8 / nut M8 Idler roller diameter: in mm 50 Idler roller per axle: 1 Idler roller material: Plastic Roller pitch, inside in mm: 55 Roller pitch, outside in mm: 100 Drive: Gravity Net weight in kg: 10 Function test: Used, fully functional Condition: Ok

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number for customer inquiries: 1546 / IMMEDIATELY AVAILABLE ----Multiple units in stock! MAN TGX 26.470 construction material platform truck with PALFINGER PK 22002 EH or FASSI F235 loading crane, IMMEDIATELY AVAILABLE! PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - Fast extension system with oil return and internal oil feed-through - Double knuckle with Power Link Plus 15° - Slewing mechanism with swing cylinders - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves at the support cylinders - Spiral hose from base frame to main boom - Level indicator at both control stands - Available with 4-stage and 6-stage extension ex stock or Fassi F235 loading crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg or 17.1 m: 740 kg * Slewing range 400° * Double knuckle-boom system with PROLINK (overbending jib up to 15°) * Electronic overload cut-off system with FX500 * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (90% and 100%), including adjustable digital slewing limiter * FASSI stability control FSC including LMB II * Control unit for 2 auxiliary functions with 2 hose guides / e-dynamic * Available with 4-stage and 6-stage extension ex stock Superstructure: Lhodpfoxnn Iijx Aa Esr * Platform body: dimensions 6,600 x 2,480 x 1,000 mm * Sideboards: each side split once (2 drop-sides), with sideboard relief * Substructure: galvanized lattice frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed platform with crane * Diesel engine MAN 02676 LFAI, 346 kW (470 HP), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automated gearbox with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy efficient * MAN EVBec high performance engine brake, multi-stage * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type leaf/air (BL) * Main wheelbase 4,800 mm, wheelbase between rear and trailing axle 1,350 mm * Fuel tank volume 590 L, AdBlue tank volume 60 L * Trailing axle steerable and liftable * Trailer coupling RINGFEDER type 4040/G150B, 40 mm towing ring * GM cab: the spacious one (wide, long, medium height) * Mattress comfort bed, lower, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment * Glass tilt roof, electric * LED lighting * MAN EasyControl operating panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane departure warning LDW * Driver attention assist MAN AttentionGuard * Emergency brake assist EBA * Standard drivetrain warranty for the 3rd operational year up to 450,000 km, see maintenance certificate for details * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,520 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Wagon No. G0119778_1 – Manufacturer: Kerex. * Portal door with simple rotary bar locks (external) * Suitable for forklift access * Fixed support legs * Equipment for rail loading * Lashing options Lhjdpfoxy Edfox Aa Eer * Partially with internal keyhole system Storage container—weatherproof, secure closure, floor in good condition, no further repairs required. Delivery: IMMEDIATE AVAILABILITY. Technically operational condition without need for further repair. Substructure shows signs of use, some rust present. Occasional paint flaking on components of the swap body. Isolated rust formation on components of the swap body. Deformations/impacts on components—see pictures. Dimensions are approximate. Offer is subject to prior sale; prices are net ex-works D-59302 Oelde. Further details upon request via telephone or email.

Condition: new, Year of construction: 2025, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision Lhjdecnz Ayopfx Aa Esr 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Lhodpfjqay Uvsx Aa Ejr Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg Lsdjvam Ebepfx Aa Eehr

Condition: used, Year of construction: 2008, functionality: fully functional, conveyor belt length: 3,050 mm, conveyor belt width: 780 mm, conveyor belt speed: 55 mm/s, total length: 3,100 mm, total width: 950 mm, total height: 1,000 mm, overall weight: 100 kg, power: 0.12 kW (0.16 HP), Equipment: type plate available, Manufacturer: Maschinenbau Kitz (mk) Year of manufacture: 2008 Overall dimensions (LxWxH) in mm: 3,100 x 950 x 1,000 Width incl. side panel in mm: 800 Width incl. drive in mm: 950 Side height in mm: 55 Conveyor length in mm: 3,050 Conveyor width in mm: 780 Belt type: Smooth PVC Belt width in mm: 780 Substructure: Height-adjustable Sliding surface: Steel Drive: Head drive Motor type: Gear motor Motor data: 400 V, 0.12 kW, 50 Hz Ljdpfxex Ivz Ho Aa Eohr Conveyor speed in m/s: 0.055 Net weight in kg: 100 Special features: incl. 3 supports Condition: used / fully functional Function test: OK

Condition: new, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 5,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, Internal number for customer inquiries: 5-060 ---- Ideal for low loader transport, etc.! Towing capacity 30,000 kg! MAN TGS 28.480 6x4-4 BL THREE-WAY TIPPER WITH FASSI F195 LOADER CRANE Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Hydraulic four-section extension 12.7 m * e-dynamic hose equipment for two auxiliary devices * Slewing range 400° * Double knuckle system with PROLINK (overbending knuckle arm up to 15°) * Electronic overload cut-off with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS remote maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger system, outrigger width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL-System (Full Lift) switchable high-speed valve for extensions * LED work lights Vehicle: Lsdoxnn Txepfx Aa Eohr * Leaf/air suspension * Drive 6x4-4 * MAN D26 diesel engine, 480 HP, Euro 6e * MAN TipMatic automatic gearbox * MAN TipMatic operation, with steering-column lever, manual (DNR selection, shift strategy selection) * Front axle as hub reduction axle, driven, selectable * Trailing axle, 9,000 kg, non-driven, steered, liftable * Differential locks on driven rear axle + front axle * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axle and trailing axle * 310-litre fuel tank, 35-litre AdBlue tank * Digital axle load display (ALM) for air-suspended axles * Cab NN: the practical one (narrow, medium-length, standard height) * Sunblind for windscreen, inside, electric * Driver’s comfort seat, air-suspended, with lumbar support and shoulder adjustment * MAN EasyControl control panel, 2 functions, operable from outside when the door is open * MAN Mediasystem Navigation Professional 12.3 inch * Navigation map Europe and Russia * Online traffic for navigation function * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Standard driveline extended warranty for 3rd year of operation up to 450,000 km, conditions as per service record * And much more. Superstructure: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with top features: radio remote control, hydraulic outriggers via radio operation, work lighting, etc.) Drop Side Platform: * Dimensions LxWxH 5,200 mm x 2,420 mm x 800 mm * (Alternative also available: load space length 4,800 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Substructure: Robust steel welded construction, two longitudinal beams with cross members to support the 5 mm thick tipper profile and 5 mm floor plate made of Hardox or Naxtra. A fixed 1,000 mm high steel front wall with 2 lashing rings inside, positioned at each outer side at half height. Corner posts fixed, with lower locks. Rear and side walls (single piece over entire length) made of aluminium hollow profiles; side walls foldable and swinging with tailboard lift assist. Tailgate also foldable and swinging, centrally locked into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, neatly welded to the tipper profile and longitudinal/cross members. Ram crosstube and tipper bracket set into the longitudinal members and accordingly reinforced. Lashing rings (4 per side) are mounted externally on the tipper floor, distributed along the length. Steel construction executed in St 52-3. All steel parts are sandblasted, body parts in RAL 9016.

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 7, loading space length: 3,050 mm, loading space width: 2,010 mm, loading space height: 98 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, German new vehicle: * Without registration * Euro 6 * 6-speed transmission * 7 seats * 90 L tank * Total weight 3,500 kg * ABS + ESP * Driver airbag * Mirrors for body width 2350 mm * Reinforced springs on the rear axle * Multifunction system with DAB radio and steering wheel controls * Central locking with remote control * Electric windows * Electric exterior mirrors / heated * Towbar with 3000kg towing capacity Three-way tipper: * Substructure: steel, hot-dip galvanized * Drive: electro-hydraulic with cable remote control * Floor: galvanized steel sheet * Aluminum side panels, 40 cm high, foldable * Leaf grille attachment 58 cm high, swinging Lodpfxjfq I A Se Aa Eohr * Internal dimensions approx. LxWxH 305x201x98 cm Load securing also available from us: * Tension and lashing straps * Restraining bars * Safety vests * Transport boxes * Edge protection * Airbags * Wheel stops * etc. Financing and leasing possible We manufacture bodies in any size and for any chassis. Tarpaulins, GRP sandwich, aluminum lightweight metal Visit us at: Bodies - Complete vehicles - Trailers - Consulting - Financing Subject to errors and prior sale, no liability for printing and input errors

Year of construction: 2022, operating hours: 10 h, condition: new, Universal testing machine H5TMC mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Lhsdpfx Aasiq Hw Uj Ejr Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, RS Simulators Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Current consumption: approx. 100 A Lhedpfx Ajv Rcbaja Ejr Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Lhsdpfx Aaevam D Rj Eor Max. stroke rate: 100 s.p.m. Length of die seat in ram: 650 mm Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Operating height: 780 mm Anvil weight: 47500 kg Weight of machine approx.: 64000 kg

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,280 mm, loading space width: 2,466 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Wagon No. G0122814_1 – Manufacturer: Kerex. * Simple corner fittings * Side/rear contour markings * Portal door with basic swing rod locks (outside) * Keyhole system (inside) * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing options Smooth furniture floor. Delivery time: IMMEDIATE AVAILABILITY. Furniture equipment. Technically operational condition without the need for repairs. Substructure shows signs of use. UVV certified. Dimensions are approximate. Offer is non-binding, subject to prior sale. Prices net ex location D-59302 Oelde. Further details on request via phone or email: Lhjdpfoxwv Tlex Aa Eer

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Lhedemdpafjpfx Aa Eer Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: good (used), Hexagon Type: Hexagon Optiv Performance 442 Product description: The Optiv Performance 442 3D multisensor coordinate measuring machine combines optical and tactile measurements in one system. The system supports multi-sensor measurements with vision sensor, tactile sensor, TTL laser (Through-The-Lens) and the innovative chromatic white light sensor (cws). The basic device with vision sensor can be modularly expanded with all available sensors. Areas of application: ٠ Use on level ground ٠ Versatile geometry measurements and GD&T analyses with standard accuracy Construction ٠ Design principle: " Low-vibration granite construction with fixed bridge and movable table " Integrated substructure with optional vibration dampers ٠ Guides: " Precise mechanical linear guides in all axes ٠ Drives: " DC servomotors, power transmission via backlash-free ball screws in the center of gravity ٠ Length measuring system; " Incremental length measuring system ٠ Resolution; 0.1 pm Hexagon Optiv 442 multi-sensor measuring device equipped with camera, laser and Renishaw touch probe. - Measuring range single sensor: 410x410x200mm - Dimensions: 1232x910x1663mm - Weight: approx. 940kg - max. load weight: glass plate 30kg - Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) - Max. travel speed per axis: 200mm/s - Camera with 2-stage zoom - laser - LED ring light - Renishaw 6-fold probe changer - Renishaw TP200 touch probe - Monitor operation - Windows 7 Ultimate evaluation station - Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5 % Power consumption 1000 VA Weight: approx. 1100 kg Condition: second-hand / used Scope of delivery: (see picture) Lodpsu Szpmofx Aa Eohr (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: used, maximum load weight: 12,560 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,675 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2016, Wagon no. G0119454_1- Manufacturer: Krone. * Double-decker device * Simple corner fittings * Contour marking rear * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Keyhole system inside * Side walls with keyhole profile * Forklift accessible * Front wall niche * Fixed support legs * Device for rail loading * Lashing recesses * Lashing options Lhedpfxexwwats Aa Ejr Double-decker equipment without double-decker loading beam (available at extra charge!). Delivery time: IMMEDIATELY. Technically ready for use condition without further repair. Substructure with signs of wear, some rust. UVV valid. UVV documents available. scattered paint flaking on components of the swap body. scattered rust on components of the swap body. Deformations/stops on components/see pictures. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or e-mail:

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: Ljdpfeiq Hxcex Aa Ejhr working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, maximum load weight: 13,120 kg, overall weight: 16,000 kg, first registration: 01/2015, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 46 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2015, Car number G0120444-1- Manufacturer: Krone. * Simple corner fittings * Contour marking side/rear * Load certificate Code-XL * Roller door (aluminum) * Keyhole system inside * Forklift accessible * Support legs fixed * Device for rail loading Financing on request. Financing possible. NEW paintwork: Choice of color in RAL color possible when ordering!. Delivery time: IMMEDIATELY. Newly painted. Technically ready for use, body and support legs newly painted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. NEW PAINT!!!. LASI CODE XL!!!. Multiple available!. Lsdpfx Ajxwv Trsa Eehr Dimensions are approximate. Offer subject to change and subject to prior sale, net prices ex location D-59302 Oelde. Further details available by phone or email:

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit * Rear door design: Rear portal doors * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed * Locking bars on rear doors: 2 Lhsdpfx Aaoxwways Ejr * Tie-down rails New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email:

Condition: used, maximum load weight: 12,340 kg, overall weight: 16,000 kg, first registration: 01/2015, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2015, Car number G0121990- Manufacturer: Krone. * Simple corner fittings * Contour marking side/rear * Loading certificate Code-XL * Roller door (aluminum) * Keyhole system inside * Forklift accessible Lhodpfx Ajxwv Rkea Eor * Fixed support legs * Device for rail loading * Lashing options Double-decker equipment without double-decker loading beam (available for an additional charge!). Financing on request. Financing possible. Paintwork NEW: Choice of color in RAL color possible when ordering!. Delivery time: IMMEDIATELY. Newly painted. Technically ready for use, body and support legs newly painted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). NEW PAINT!!!. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change and prior sale is reserved, prices net ex location D-59302 Oelde. Further details available on request by phone or email: