Used Blacksmith Forge for sale (188)

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min Gedpert Uc Eefx Afnjin max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Godpfx Aeu Eb Niofnein Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: new, Year of construction: 2025, pressing force: 20 t, 20 T Single-Column Forging Press (DCS-20) Technical Specifications - Press Pressing capacity: 5–20 t (adjustable) Maximum installation height: 700 mm Table usable area: 500 x 600 mm Ram usable area: 500 x 600 mm Frame type: C-frame Table height from floor: 800 mm Overall dimensions (W x D x H): approx. 1,450 x 1,500 x 2,400 mm Total weight: approx. 1,900 kg T-slots: according to DIN 650 (18 mm) or machined to customer specifications Hydraulic Cylinder Piston stroke: 0–500 mm (adjustable) Cylinder diameter: Ø 90 mm (1 pc.) Piston rod diameter: Ø 60 mm (1 pc.) Rapid traverse cylinder diameter: Ø 40 mm (1 pc.) Rapid traverse piston rod diameter: Ø 25 mm (1 pc.) Max. working pressure: 250 bar (adjustable) Return speed: 140 mm/s Rapid traverse speed: 140 mm/s Pressing speed: 4–10 mm/s (adjustable) Pressure build-up time (closed tool): max. 2 s (steel on steel) Hydraulic Unit Hydraulic pump: REXROTH, 22 l/min (1 pc.) Motor power: 7.5 kW (1 pc.) Pressure accuracy during pressing stroke: ±5 bar Gsdpfjyght Rox Afnein Oil tank capacity: 150 l Mounting: Hydraulic unit mounted at the rear/top of the press Hydraulic manifold and valves: HYDROPACK Air filter and oil filter: FILTREC Oil level: electronic oil level switch Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Main hydraulic motor connection: 7.5 kW Total connected load: approx. 10 kW

Condition: used, Year of construction: 1999, ram hammer weight 26 kg Gisdpfx Afoqwpxbjnen ram hammer stroke 200 mm type KO 596 no. of strokes 220 Hub/min air hammer

Condition: used, Year of construction: 1970, pressure . t stroke . mm impact capacity 60-70 mkp Gedpfx Afsud Tp Nonoin total power requirement . kW weight of the machine ca. 3 t dimensions of the machine ca. . m

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Giedpfowm Nm Tjx Afnon

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Gisdewm Nm Hepfx Afnjn

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless Gedpfoid Im Eox Afnein temperature control. Heat exchanger, combustion air fan.

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm -Wingspan: 150 mm -Number: 9 vises available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg Godpfx Aedl E Irjfnsin

Condition: good (used), Anvil with base -LxWxH: 1000x350x360 mm (anvil dimensions) -Weight approx. 300 kg Gsdpfxjx N Ew Tj Afnsin Subject to errors and input mistakes.

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm Giedpfx Aovzxpbofnsn steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t Gjdjvuullopfx Afnein dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s Gisdpfswmf Tvox Afnon as is where is, WITHOUT putting into operation

Condition: new, Say-Mak SPH 50 - Pneumatic forging hammer - Welded steel construction - Regular striking with valve adjustment - Pneumatic working system with 2 pistons - Hour counter - All dies and sal-block interchangeable, sal-block adjustable in 8 directions - Adjustable sal-block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons Gjdpfx Ajuzhkrofnoin - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - incl. steel foundation Technical specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

Condition: used, Year of construction: 1976, pressing force: 1,000 t, Manufacturer: EUMUCO Model: SP 100 Year: 1976 Condition: Used, In working condition Press Capacity: 1000 tons Table Size (mm): 850 x 1250 Slide Stroke (mm): 250 Strokes per Minute: 100 Last Overhaul: 2021 Slide Size (mm): 730 x 760 Slide Adjustment (mm): 17.5 Number of Pressure Points: 1 Number of Slide Guides: 4 Slide Adjustment System: Wedge Shut Height (mm): 820 Front Opening Between Uprights (mm): 880 Side Opening Between Uprights (mm): 300 Weight (tons): 50 Motor Power (kW): 55 Electrical Cabinet Condition: Completely renewed in 2021 Gijdpfsyitwgsx Afnon Additional Information: Hydraulic lower ejector, stroke 100 mm

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven Gsdpfx Afsx Ezuyensin - Production capacity: up to 600 ends per minute

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Giedpfxox I Rdis Afnjn Solid round: 20 mm diameter Handrail: 60x12 mm

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? Godpfxodxvfpe Afnsin :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, Force 1600 tons Slide stroke 300 mm Distance adjustment between table and slider 10 mm Slide strokes per minute 75 spm Length of a rod 920 mm Closed height (min distance table–slide) 660 mm Table dimensions 940 × 1200 mm Table height above floor level 450 mm Gjdpfxox Ek Nte Afnoin Slide dimensions 860 × 910 mm Lateral window (h/w) 560x600 mm Main motor 110 kW Dimensions 5060x3940x5125 mm Press weight 120 tons

Year of construction: 1978, condition: excellent (used), FORGING HAMMER HUTA ZYGMUNT MPM 6300B Gisdpfsivqanjx Afnsn

Condition: good (used), Year of construction: 1995, machine/vehicle number: 250 95, Offer 25443 Technical Data: - Ram weight: 40 kg - Impact adjustment - Stroke height steplessly adjustable: 200 mm - Blows per minute: approx. 220 1/min - Throat depth: 280 mm Godpfxsx A U Ufe Afnsin - Anvil height: approx. 560 mm - Anvil weight: 250 kg - Drive: 380 V / 4 kW - Space requirement: approx. W 850 x H 1100 x D 1350 mm - Weight: approx. 850 kg

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Throat: 375 mm Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Godpfoubb Stjx Afnein Machine weight: 6000 kg

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: AQ1195020, overall weight: 1,800 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! MACHINE DETAILS Motor Total power: with hydraulics 5.0 kW / without hydraulics 7.2 kW Voltage: 400 V Total current: with hydraulics 12 A / without hydraulics 18 A Frequency: 50 Hz Motor protection class: IP 55 Hydraulics Max. flow rate: 6.4 l/min Max. pressure: 200 bar Oil tank capacity: 13 l Recommended hydraulic fluid: ESSO Hydraulic Oil HLP32 Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,350 x 1,500 mm Total weight: 1,800 kg EQUIPMENT Gedpfoxp Nqusx Afnjin Accessories as shown in the photos Technical documentation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 63KJ, 63 kJ LASCO hot forging press available for sale. The machine was purchased in working condition; however, due to changes in production scheduling, it was never commissioned at our facility and has not been put into operation by us. The press is in good overall condition and is visually clean and well maintained. Renowned for its robust and reliable construction, this model is suitable for a wide range of hot forging applications. The machine can be inspected on site. Prospective buyers are welcome to carry out their own technical inspections and assessments. Gjdpfjyh Atxsx Afnsin Technical details and pricing will be provided upon request.

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Gijdpfx Aefpgp Eefnsn Screwed feet Plate thickness 110mm Hole diameter 45mm Weight approx. 2.0 tons