Used deephole boring machines for sale (87)

Condition: used, Year of construction: 1990, core drilling diameter max. 6 mm bore depth 350 mm swing diameter mm total power requirement 15 kW Gkedpst Hw A Tofx Aaysf weight of the machine ca. 3500 kg dimensions of the machine ca. 5000 x 1200 x 2200 mm

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Gedpjwu Eb Aofx Aayekf Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Gjdpfjh Dpv Rjx Aayjkf Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 286, workpiece weight (max.): 2,000 kg, spindle speed (max.): 3,000 rpm, travel distance milling slide X-axis: 650 mm, travel distance milling slide Y-axis: 300 mm, travel distance milling slide Z-axis: 600 mm, swivel angle A-axis (min.): -20 °, swivel angle A-axis (max.): 20 °, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis (transverse): 650 mm Y-axis (vertical): 300 mm Gjdsv Iay Ujpfx Aayskf Z-axis (drilling axis): 600 mm A-axis (swivel range of the drilling axis): ± 20° W-axis (table adjustment): 650 mm Control: Siemens Simatic OP17 Drilling capacity Maximum drilling depth: 900 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 4 – 20 mm Thread cutting: M 16 Drilling spindle Spindle mount: MK 2 Spindle speed: 0 – 3,000 rpm Spindle drive (60% E.D.): 6.0 kW Spindle drive (100% E.D.): 4.1 kW Workpiece table Dimensions: 1,100 x 650 mm Swivel range: ± 360 degrees Load capacity: 2,000 kg MACHINE DETAILS Length: 2,620 mm Height: 1,637 mm Table height: 950 mm Width: 1,485 mm Weight: 1,600 kg X-axis (transverse): ball screw with servo motor Y-axis (vertical): ball screw with servo motor Z-axis (drilling axis): rack and pinion drive with servo motor W-axis (table adjustment): ball screw with gear motor

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Gjdpfx Ajw Agqhjayokf Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, drilling depth: 750 mm, spindle speed (max.): 6,720 rpm, drill diameter: 20 mm, spindle stroke: 1,450 mm, distance between centers: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Spindle spacing: 120 mm Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drill diameter: 4 – 20 mm Drill depth: 750 mm EQUIPMENT - Chip conveyor Godpfx Aaowm Ebyjyskf - Air cooler - Filter unit - Revolving belt with workpiece carriers

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Gsdpfjw Izr Aox Aayekf Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Gjdpfx Asw E H E Reayokf Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Gkedpsw Elrvefx Aayof Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 Gksdpeu Itk Rjfx Aayjf 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Center height above table: 250 – 600 mm Gjdpfx Aew Ekfuoayskf Z-Axis Feed rate: 0-7,000 mm/min W-Axis - 400 mm Feed rate: 0-7,000 mm/min X-Axis - 800 mm Feed rate: 0-2,000 mm/min Y-Axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Includes 1,700 l coolant system 20 single-lip drills from D=6 mm–20 mm/lengths from 1,200–1,750 mm Operating hours: 13,000 h

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% Gkjdewh Rp Eepfx Aaysf - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.