Used dust extractors / dedusters for sale (111)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2570x1100x2490 mm Weight 400 kg Total power requirement 4 kw Dedpfxoy Ehy Ae Ab Nswb

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Dedpjhkzttjfx Ab Nswb Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Dedpfxohk Dfro Ab Nswb Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x1000x2300 mm Weight 630 kg Dedpfx Asvz Erceb Nswb Total power requirement 11 kw

Condition: new, Year of construction: 2023, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. Dodpfx Ajku Aibob Njwb This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Always in stock, available as left-hand and right-hand models with motorized cleaning. Riedex DM-200 Motor power 4.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible ... - with cell wheel lock (if desired, with a subframe) - with briquetting press etc.

Condition: new, Year of construction: 2023, Dear customers, Dwjdpfx Asku Aifeb Njb To ensure prompt and reliable processing of your request, we kindly ask you to contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Always in stock, available as left-hand and right-hand versions with motorized cleaning. Riedex DM-160 Motor power 3.0 kW Ready for connection. Packaged on a pallet! Ready for shipment. Alternatively, also available with JET cleaning. Many different versions are possible: - with a rotary valve lock (if desired, with a subframe) - with a briquetting press etc.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2260x920x2250 mm Weight 450 kg Dwsdpfx Aovz Eiuob Neb Total power requirement 7,5 kw

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile 2x chip bins á 190l Volume flow 2500 m³/h Dwedpfxsvz Uhyj Ab Nsb HxWxD: 2160 x 830 x 1900 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x800x2500 mm Weight 400 kg Total power requirement 2,2 kw Dodpfx Absv A Hxys Nowb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x920x2250 mm Dwodpfx Asvz Erijb Neb Weight 410 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM470 Dust Collector is a high-performance industrial sawdust extraction system designed for large woodworking workshops and industrial production facilities. Equipped with a robust construction and a multi-fan extraction system, it delivers maximum efficiency and reliability in demanding working conditions. Key Features Impressive airflow capacity of 6,800 m³/h – provides efficient extraction of sawdust and wood chips from multiple workstations simultaneously. 5.6 kW motor – three-phase 400 V power supply ensures stable and reliable continuous operation. Balanced metal impeller – guarantees smooth, quiet, and vibration-free performance. Large collection capacity with 8 × 200 L bags – reduces emptying frequency and enables uninterrupted operation. Heavy-duty steel construction – powder-coated housing provides excellent resistance to mechanical damage and corrosion. Construction and Technology Dwodpsvu Ryrsfx Ab Njb The CORMAK FM470 woodworking dust collector is equipped with a durable steel fan featuring a precisely balanced impeller, ensuring stable airflow and long service life. The housing is manufactured from thick steel profiles, protecting the unit against mechanical damage and demanding workshop conditions. The bag mounting system with clamps and fastening rings allows quick installation and replacement of large fabric filter bags. The design also provides easy access for maintenance and servicing. Precision and Performance The high efficiency of the FM470 dust extraction system results from optimized fan geometry and a large filtration surface area provided by the collection bags. Stable airflow ensures effective removal of dust and chips, improving machine performance, workplace cleanliness, and operator comfort. Applications The FM470 is ideal for: Industrial woodworking and furniture manufacturing plants – extraction of chips from routers, planers, saws, and thickness planers. Factories and production halls requiring clean air and high-capacity dust extraction. Technical schools and educational workshops – providing a safer working environment. Mobile and central dust extraction systems – serving as a powerful industrial sawdust collector. Standard Equipment 8 fabric filter bags (200 L each) Bag mounting system (clamps and fastening rings) Optional Equipment Ø100 mm extraction hose Galvanized hose clamp Technical Specifications Specification Value Extraction capacity 6,800 m³/h Collection bag capacity 8 × 200 L Number of bags 8 Extraction inlet 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 3,560 × 580 × 2,200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400 V

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 Dust Collector is a heavy-duty industrial dust extraction system designed for intensive use in large woodworking shops, furniture manufacturing plants, and production facilities. With an impressive 5,000 m³/h airflow capacity, a robust steel construction, and the ability to connect up to four woodworking machines simultaneously, the FM500 delivers reliable, continuous dust extraction while maintaining a clean, safe, and efficient working environment. Key Features 2.8 kW (S1) three-phase motor / 400 V – designed for continuous industrial operation. Airflow capacity of 5,000 m³/h – efficiently extracts sawdust, wood chips, and fine dust from up to four machines at the same time. Vacuum pressure up to 2,500 Pa – provides consistent suction performance, even under heavy dust loads. High-efficiency metal impeller – dynamically balanced for smooth, low-vibration, and quiet operation. Quick-release collection bag system – allows fast and tool-free bag replacement. Large 480 L waste collection capacity – minimizes downtime by reducing the frequency of bag emptying. Multi-port inlet manifold (Ø200 mm / 4 × Ø100 mm) – compatible with multiple woodworking machines. Mobile wheeled base – enables easy movement around workshops and production facilities. Construction and Technology The FM500 is built around a heavy-duty steel frame that ensures durability and long-term stability. A large-diameter, high-performance fan operating at 2,950 rpm generates an air velocity of up to 31 m/s, delivering powerful and consistent extraction performance. The machine is equipped with woven fabric filter bags (Class II filtration) capable of capturing dust particles as small as 5 microns, helping maintain clean air in the workplace while supporting compliance with occupational health and safety standards. Performance and Efficiency The CORMAK FM500 woodworking dust collector maintains stable suction power during prolonged operation, making it suitable for continuous production environments. It can effectively serve up to four workstations simultaneously without compromising extraction performance. The large filter surface area and high-capacity collection bags reduce maintenance intervals and maximize productivity. Applications The FM500 is ideal for: Woodworking and furniture manufacturing workshops Timber processing and panel production facilities Technical schools and vocational training centres with multiple workstations Production lines requiring centralized dust extraction systems Standard Equipment Two fabric filter bags Two waste collection bags Inlet manifold (4 × Ø100 mm + 1 × Ø200 mm) Mobile base with heavy-duty wheels Optional Equipment Cartridge filter (2-micron filtration) Flexible extraction hoses (Ø100 mm / Ø200 mm) Dwsdpevu Aqpefx Ab Njb Galvanized hose clamps Technical Specifications Specification Value Motor power (S1) 2.8 kW Power supply 3-phase, 400 V / 50 Hz Motor speed 2,950 rpm Airflow capacity 5,000 m³/h Maximum vacuum pressure Up to 2,500 Pa Air velocity Up to 31 m/s Filter bags Woven fabric (Class II filtration) Waste collection capacity 480 L Inlet connections 1 × Ø200 mm / 4 × Ø100 mm Overall dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200P Sawdust Extraction System – Reliable and Compact Workshop Dust Collector The CORMAK DC2200P sawdust extraction system is a robust and compact woodworking dust collector designed for intensive operation with milling machines, saws, and planers. Thanks to its compact design and high suction performance, it is an excellent choice for small and medium-sized woodworking workshops requiring a reliable sawdust extraction fan. Main Advantages of the Machine Extraction capacity of 2200 m³/h – effective removal of chips and dust even during intensive operation. 2.2 kW / 400 V motor – reliable three-phase power supply with high torque performance. Compact design – saves workshop space while maintaining strong suction power. Stable and durable metal housing – resistant to mechanical damage and industrial working conditions. Mobile base – easy movement of the unit thanks to the integrated wheel system. Design and Technology The DC2200P is equipped with a balanced metal rotor mounted in a durable steel housing, ensuring smooth and vibration-free operation. The quick-release bag and filter mounting system allows for fast replacement, while the sealed construction ensures effective retention of contaminants within the extraction system. The 125 mm inlet diameter enables connection to standard dust extraction systems. Precision and Work Efficiency The reliable CORMAK DC2200P dust collector provides a consistent airflow, effectively removing dust and sawdust without the risk of backflow. The unit delivers high performance while maintaining a low noise level, improving operator comfort during daily use. Applications The CORMAK DC2200P is suitable for: Woodworking workshops – extracting chips from milling machines, planers, and table saws. Wood processing plants – dust and chip extraction from individual workstations. Training and technical workshops – a safe and efficient solution for maintaining a clean working environment. Hobbyists and craftsmen – a compact sawdust collector for demanding users. Standard Equipment Fabric filter bag Waste collection bag Mobile base with four wheels Optional Equipment Ø125 mm extraction hose Dodpfxsvuzt Nj Ab Newb Quick-mount hose clamps Technical Specifications Parameter Value Extraction capacity 2200 m³/h Bag diameter 500 mm Inlet diameter 125 mm Motor power 2.2 kW Power supply 400 V / 3 phase Dimensions 1160 × 605 × 750 mm Weight 50 kg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Dwsdpocnw T Iefx Ab Njb Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 Dust Collector is an industrial dust extraction system designed for efficient and reliable removal of sawdust and wood chips in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key Features Powerful 3.8 kW motor (400 V) – ensures reliable, continuous industrial operation. Airflow capacity of 4,860 m³/h – efficiently extracts large quantities of sawdust and wood chips. Metal sawdust extraction fan – durable steel impeller provides quiet, vibration-free operation. Heavy-duty steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise machine positioning even on uneven surfaces. Six collection bags (200 L each) – increased waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps allow fast, tool-free bag removal. Connection for up to four machines – extraction manifold with 1 × Ø180 mm and 4 × Ø100 mm ports provides flexible installation options. Construction and Technology The FM350 is equipped with a robust steel extraction fan and a reinforced frame designed for intensive industrial use. High-quality components ensure durability, overload resistance, and reliable operation during continuous production. The modern bag mounting system allows quick and convenient maintenance, while the powder-coated steel housing provides additional protection against wear and harsh workshop conditions. Precision and Performance Dsdpfsvu Rx Ijx Ab Newb Thanks to its large filter surface area and high suction pressure, the CORMAK FM350 dust collector provides excellent working conditions even during intensive woodworking operations. Efficient dust separation helps maintain cleaner air, improves workplace comfort, and increases operator safety. Applications The FM350 is ideal for: Wood processing plants – extraction of chips and dust from saws, planers, and milling machines. Professional woodworking workshops – suitable for multi-station operation. Technical schools and educational workshops – efficient dust extraction for training environments. Large industrial halls – where a high-capacity sawdust extraction system is required. Standard Equipment 3 fabric filter bags 3 fabric waste collection bags Extraction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional Equipment Galvanized hose clamps 3-micron filter cartridge insert Technical Specifications Specification Value Airflow capacity 4,860 m³/h Collection bag capacity 3 × 200 L Number of bags 6 Extraction inlets 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 2,355 × 590 × 2,150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase, 400 V

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5470x1100x2500 mm Weight 1100 kg Djdpfx Aevz E Nhsb Nowb Total power requirement 11 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4590x1100x2500 mm Weight 1000 kg Total power requirement 7,5 kw Dsdpfx Ajvz E Iqeb Nswb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3480x1100x2500 mm Weight 900 kg Dwjdpevz Hc Aefx Ab Njb Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Dwodpehkzt Nofx Ab Njb Subject to prior sale

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300N transport fan is a heavy-duty industrial-grade unit designed for efficient extraction of sawdust, dust, and fine wood waste in production plants and carpentry workshops. With a high capacity of 2530 m³/h and a powerful 1.5 kW three-phase motor, the unit effectively supports woodworking processes, ensuring cleanliness, safety, and smooth operation. The FM300N is a reliable sawdust blower engineered for intensive use and long service life. Key Advantages Extraction capacity of 2530 m³/h – effective contaminant removal even during high-intensity operation Dedpfevu Afgsx Ab Njwb 1.5 kW three-phase motor – stable performance under continuous load Universal connection system – one 130 mm inlet or two independent 100 mm inlets Damage-resistant construction – durable metal housing Energy-efficient and low-noise operation – optimized power consumption and improved acoustic comfort Design and Technology The FM300N is built on a stable, welded steel frame resistant to dynamic loads and external factors typical of industrial environments. The high-efficiency aerodynamic impeller is mounted directly on the motor shaft, eliminating transmission-related power losses and ensuring long service life. The unit features two 100 mm suction ports (or one 130 mm port), allowing simultaneous operation of two workstations or connection to large-format machines. The 400 V three-phase motor provides sufficient power and operational stability in industrial facilities. A rotational speed of 2950 rpm guarantees intensive airflow, even during prolonged operation. The entire design has been optimized for easy installation and maximum use of workspace. Precision and Performance The FM300N is a dependable sawdust extraction unit capable of transporting wood by-products generated during machining—from fine sanding dust to heavier sawdust and chips. Its high airflow capacity ensures smooth operation of production workstations, reducing the risk of blockages and limiting the emission of contaminants in the working area. Applications The FM300N is intended for professional environments where durability and efficiency are essential. It can operate as a standalone sawdust fan or as part of an advanced dust extraction system. Typical applications include: carpentry workshops furniture manufacturing plants wooden component production departments workstations with circular saws, planers, spindle moulders, and sanders Standard Equipment powder-coated steel housing three-phase motor 400 V / 50 Hz suction port: 1 × 130 mm or 2 × 100 mm integrated base for stationary installation Optional Equipment bag filters flexible hoses Ø100 mm, Ø120 mm, Ø150 mm Technical Specifications Parameter Value Motor power 1.5 kW Speed 2950 rpm Extraction capacity 2530 m³/h Inlet diameter 130 mm / 2 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 430 × 410 × 450 mm Weight 24 kg

Condition: reconditioned (used), machine/vehicle number: 2433345525, functionality: fully functional, Suction nozzle, 125 mm Nominal volume flow rate 884 m³/h Dwodjiw D U Nepfx Ab Neb Motor power 2.2 kW, 16 A Mobile Weight approx. 194 kg L x W x H: 1000 x 840 x 1650 mm Container size 730 x 660 mm Manual vibration

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM300S Dust Collector is a high-performance dust extraction system designed for intensive operation in woodworking shops, furniture manufacturing facilities, and the timber industry. Equipped with a 2.2 kW motor, large-capacity collection bags, and an extraction capacity of up to 3,900 m³/h, this industrial sawdust collector provides efficient and safe dust removal even in demanding production environments. Key Features 2.2 kW / 400 V motor – designed for continuous industrial operation. Airflow capacity of 3,900 m³/h – efficiently extracts sawdust and wood chips from multiple workstations simultaneously. WhirlWind multi-blade metal impeller – dynamically balanced to ensure quiet, stable, and vibration-free operation. Reinforced steel construction with additional supports – provides excellent durability and structural rigidity. Quick-release bag mounting system – enables convenient operation and fast bag replacement without tools. Mobile base with bearing-mounted wheels – allows easy movement around production halls and workshops. Highly sealed extraction system – four flexible sealing elements at critical points minimize air leakage and maintain suction efficiency. Construction and Technology The CORMAK FM300S woodworking dust collector is equipped with a WhirlWind series metal impeller, precisely balanced and designed for intensive industrial use. The entire structure has been reinforced with additional supports and brackets capable of handling the weight of fully loaded collection bags. The housing is manufactured from thick steel resistant to deformation, while specially designed sealing elements improve system tightness by reducing vacuum losses and increasing overall extraction efficiency. Performance and Efficiency The FM300S delivers excellent extraction performance when operating with multiple machines simultaneously. The system allows connection through: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The large filtration surface and four high-capacity bags (2 filter bags and 2 waste collection bags) enable long periods of maintenance-free operation with minimal downtime. This powerful sawdust extraction system is designed to meet the requirements of demanding professional users. Applications The CORMAK FM300S is ideal for: Furniture manufacturing plants and professional woodworking shops – as a central chip extraction system for multiple machines. Industrial workshops processing wood, MDF, plywood, and other wood-based materials. Production lines requiring reliable dust extraction as part of automated processes. Technical schools and training centres – providing an efficient and safe solution for educational workshops. Standard Equipment 2 fabric filter bags 2 plastic waste collection bags Metal mobile base with bearing-mounted wheels Optional Equipment Galvanized hose clamps High-efficiency filter cartridge with filtration down to 2 microns Technical Specifications Specification Value Airflow capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Collection bag capacity 150 L Number of bags 2 × fabric (filtering), 2 × plastic (waste collection) Extraction inlet 1 × Ø150 mm or 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 1,960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual (DTR) CE Declaration of Conformity Yes Dwodpjvu Artsfx Ab Nsb

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Dwjdpfxjycvhns Ab Njb

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Dwedpfx Abjcdr Enj Nsb Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition model – new Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Vacuum: 2280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from Bitburg warehouse Dwjdpecdrzdefx Ab Nob Subject to prior sale.