Used Vacuum Dust Extraction for sale (10,124)

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Hsdpfsw Avl Uex Ac Tet

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: Hsdpfx Aswwt Aaoc Tot - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Hsdpfxexh Ammj Ac Tst Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! Hedpfx Acjznibwj Tjt International shipping costs available upon request!

Condition: used, Year of construction: 2010, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 3,260 mm, total length: 2,580 mm, total width: 1,115 mm, We offer this used CORAL EUROFILTER 300 dust extractor, year of construction 2010. Article: EUROFILTER 300 Serial number: 202 Voltage: 400/690 V Hodpjygxbfofx Ac Tst Frequency: 50 Hz Power: 7.5 kW Rated speed: 2800 RPM Inlet dia of 300mm inlet of the rotary 280mm Automatic cleaning: yes Manual removal/cleaning of filters: only periodically, mainly for inspection or replacement The machine is operational and available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, SCV8900TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive use in woodworking and manufacturing facilities. Thanks to the BIG-BAG system and the automatic VIBER filter cleaning system, the unit ensures continuous operation with minimal maintenance while offering a very large waste capacity. It is a unique solution on the Polish market. Key Advantages BIG-BAG – high-capacity container significantly extending the time between emptying cycles VIBER system – automatic filter shaking system ensuring long-lasting filtration efficiency TC housing – effective acoustic insulation and vibration dampening REHEAT – heat recovery from extracted air, improving the facility’s energy efficiency DAMAGE PROTECT – mechanical impeller protection against hard object intake Exceptional suction system tightness – maximum efficiency and no heat loss during winter Construction and Technology The unit is equipped with a metal, dynamically balanced impeller that guarantees quiet and stable operation while maintaining maximum airflow performance. The chip extraction fan is powered by a reliable 7.5 kW motor. The impeller blade design has been aerodynamically optimized to reduce energy consumption. Precision and Performance With a capacity of 8,900 m³/h and filtration of particles down to 5 microns, the system ensures perfect working conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG chip extractor allows seamless connection to multiple machines simultaneously, supporting continuous operation. Application The machine is dedicated to professional woodworking shops, carpentry workshops, furniture manufacturers, and large industrial production lines where maintaining clean air is crucial. The central dust extraction system performs perfectly in cooperation with machines such as panel saws, edge banders, sanders, and CNC machining centers. Hjdpsup Df Tjfx Ac Tot Standard Equipment Polyester filters with 5-micron efficiency Automatic filter cleaning system (VIBER) Built-in REHEAT system BIG-BAG waste collection unit DAMAGE PROTECT system Control cabinet Optional Equipment HEPA filter for finer dust fractions Bin fill level monitoring Differential pressure sensors Remote control system Technical Specifications Power supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 45 pcs Filtration area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum pressure: 3000 Pa Air velocity: 32 m/s Noise level: 80 dB Number of BigBags: 1 pc BigBag capacity: 1250 L Dimensions: 2400 × 1100 × 3600 mm Weight: 540 kg

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws Hedpfjudaazex Ac Tet format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Optional equipment HEPA filter system Additional air distribution system Ceiling-mounted extraction connections Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm Hsdpfxezwdn De Ac Tot -Weight: 584 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. Hsdpfxjx Agpze Ac Tot A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: used, functionality: fully functional, machine/vehicle number: GE6, Guyson GE6 Hsdpjzguqhsfx Ac Tst Mid-sized, industrial manual blast cabinet with dust extraction unit. Suitable for precision surface preparation, cleaning, deburring, and cosmetic finishing of manufactured components using compressed air and abrasive media (such as glass beads or aluminum oxide). Full working order. Estimated around 10-15 years old. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2001, condition: used, functionality: fully functional, Used wet and dry vacuum cleaner (dust extraction system) in good condition. Extraction capacity: 1,800 m³/h. Hodpszb Ipuefx Ac Tjt

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters Hedpfx Asrhidmjc Tet from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Hjdpfjup Difox Ac Tjt Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Hodpfjy Sz Dnsx Ac Tot Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Year of construction: 1999, condition: good (used), DISA dust extraction system, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, shot blasting, media blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Hedohqd Tvopfx Ac Tet The fan is located on the clean air side, minimizing the risk of explosion. Highly durable filter cartridges, resistant to moisture. Aluminum-coated, antistatic, operating temperature up to 135 degrees Celsius. Fan power: 11 kW. Capacity: up to 8000 m3/h. Vacuum: up to 4300 Pa. Filtration area: 128 m2.

Condition: used, Year of construction: 2023, machine/vehicle number: 200617, functionality: fully functional, Dear customers, To ensure fast and reliable processing of your request, we kindly ask you to contact us preferably by email. Hodpfx Asy Hz Upec Tst This will allow us to assign your request directly to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Technical data can be found on the nameplate. Available: immediately, the customer will receive a larger unit. Serial number: 200617 Riedex DM-200/M-B Dust collector Left-hand version, motorized cleaning, with chip container.

Condition: good (used), Dust extraction unit, extraction system, self-cleaning vacuum filter, absorber, dust collector for extracting graphite, metal, mineral, hard fiber, flammable, hazardous, and toxic dust, and for the effective collection of process dust, blasting dust, sanding dust, grinding dust, polishing dust, and all types of dry dust. The extraction unit has explosion hazard classes ST1 and ST2. The vacuum fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Filter cartridge – multi-pocket design. 11 kW fan in a sound-absorbing housing. Capacity: 3500 m3/h. Vacuum: 7000 Pa. Filtration area: 24 m2. Automatic filter cleaning with an electric motor. The extraction unit was used during graphite processing. Hedpeg Rhfbsfx Ac Tst

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Hedpfxjl Dw U Dj Ac Tjt Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2019, Esta Dustomat 62 Dust Extractor The best-selling, certified dust extractors The professional-grade Dustomat 21-67 series meets the highest standards. These units can be used both as mobile units at individual workstations and centrally for simultaneous extraction at multiple locations. Depending on the unit size and the nozzle diameter of the processing machines, extraction can be performed simultaneously at up to six locations. The permanent filter cartridges are cleaned manually, with a motor, or with compressed air, depending on the unit model. • Compact and powerful • Low operating costs • Easy dust disposal • Can be used as a mobile single-station or central extraction system • Suitable for almost all types of dust • Optional certification for special applications Areas of application: - Single and multi-station extraction in industry and trade - Free-flowing dusts - Dry shavings Special features: - Four filter cleaning methods: manual, motorized, pneumatic, and jet cleaning - Cleanable permanent filter cartridges (dust class M) - Post-filter cassettes (dust class H) available as an option Manufacturer: Esta Type: Dustomat 62 Connection voltage: 400 V Connection diameter: 160 mm Drive power: 3 kW Filter area: 9.6 m² Dust collection container: 200 liters Mobile collection container Max. negative pressure: 4,600 Pa Max. air volume flow: 1,850 m³/h Hodpfx Aceyftxve Tet Dimensions: 1,830 x 782 x 2,040 mm Year of manufacture: 2019 Weight: 265 kg Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2003, condition: used, Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 Hedpfxoztbwhe Ac Tet - Documentation available: No - CE marking present: Yes - CE certificate present: No - Suitable for material: Metal dust - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Hodpfx Aenyhvqjc Tot Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 7.5 kW (10.20 HP), suction capacity: 5,100 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total width: 900 mm, Equipment: CE marking, We offer this used SPÄNEX SMU 6000.1 with a rotary valve airlock, mobile dust extraction system/dust collector, manufactured in 2014. Manufacturer: SPÄNEX Model: SMU 6000.1 with rotary valve airlock Year of manufacture: 2014 Condition: used Machine type: Mobile dust extraction system/dust collector If you have any questions or require further information, please feel free to send us a message or call us. Hodezhcr Aepfx Ac Tst

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Hodpjzdddyofx Ac Tot Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs. Hodpfx Asmrm Rajc Tst

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Hjdpeuc U N Ujfx Ac Tjt Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Optional Equipment HEPA filters Ceiling-mounted extraction system Additional suction pipes and connectors Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg