Mileage: 86.183 (as of 16.07.21)
Power: 81 kW
The entire cleaning sy. was serviced at the manufacturer in 2020 for about 7,000.00 EUR.
- Rear view camera
The main components are:
- 880l Build in tank system
- 2x hose reels with 120 m hose
- Water heater up to 45° C
- Aqua force 500 for 360 ltr. purified water/hour
- Chemistry injector automatic
- Carrier system for 12 carbon rods
- more than 10 carbon rods a 170 cm
- various brushes and cleaning utensils
Metal washer Fabr. Barca CLEANER type 5 H
Fabr. # 8022 built in 1980
Internal dimensions 1500 x 1500 x 1000 mm
Basket size 1250 x 1250 mm
Water capacity 300-500 l
maximum heating temperature 70 °
Heating-up time of the washing machine 1 hour
Spray pressure 4.3 bar
Cleaning time 10-15 minutes
Heating power 9.0 kW
Dimensions L x W x H 2000 x 2000 x 2400 mm
-Feed carriage with 2 baskets
used from operating resolution
Scott Equipment AST Dryer complete with Feeder, Air Heater and Exhaust Fan
110 kW Dryer Drive
90 kW Fan Drive (Airflow: 30,000 m3/hr)
Agitated Feed Hopper with Feed Screw
3.4 MW LPG Air Heater
Machine can be supplied in either "as-is" condition, fully refurbished, or as part of a process system.
POWDER PROCESS DESIGN SERVICES - more than just a used equipment seller....
Powder Process Design Services Ltd was founded in 2004 and has rapidly established a first-class reputation in the design, ...
° Up to 430 A4 forms per minute
° 78,000 4", 39,000 8", 26,000 12" forms per hour
° Height adjustable stacking plate
° Standard tractor guide
UNIVERSAL, POWERFUL, VERSATILE. You want more? This device processes endless multipart sets with or without carbon paper cleanly and without any problems.
New build 8" inch highly efficient sand dredger (production 800 m3 hour)
Iveco Engine (220 Kw) outher Diesel driven Engine is possible
Dredging depth up to 15 meters
4 Hydraulic winches
Water Jet pump system
150 mtr dischare pipes included
main pontoon dimensions: 6x2x1 mtr
side pontoons dimensions: 11.50 mtr
Everything transportable in one 40ft container
This Dredge is designed to dig into the shallow waters of rivers, lakes, channels and docks, and it can be used for the cleaning of...
lifting height 3600 mm
lifting capacity 1200 kg
centre load 600 mm
fork length 115 cm
width over the forks 57 cm
fork height 86 mm
width between the forks 230 mm
turn radius 1342 mm
total length 1656 mm
total width 795 mm
height of mast with forks at 3600 mm 4115 mm
height mast at bottom of forks 2390 mm
2x 12v 85ah battery
0.65 kw traction motor 4.5 km/h unloaded 4.0 km/h loaded
2.2 kw lift motor
lifting: 110 mm/s no load 210 mm/2
lowering: 120 mm/2 no load 110 mm/2
internal charger 24v
Ferro Dec 56 Decoating Medium.
For sale due to outsourcing of coating to a third party supplier.
Total 50 canisters á 10 kg each = 500 kg.
Price EUR 5,00 per kg.
ex works, incl. packing
We sell an LCT bio.X C 500 washbasin with a stainless steel structure for washing heavy parts up to 1500 KG, which can easily be washed or rinsed on the frame using a washing brush.
The price includes 100 liters of LCT Bio Liquid for washing at an optimal 41 ° C.
Equipment of the washbasin:
Side filter set with washable filters
Round perforated sheet in the washing area can be removed
Filter sieve in the drain also for washing out
Circuit board for time control of the pump and...
Suction Dredger 6 inch
For sale a new jet suction dredger 6 inch for sand, gold or gravel dredging works. Capacity 6 inch Warman dredgepump 450 m3/h (high pressure) with 210kW marine engine
This Dredge is specially designed to dig into the shallow waters of rivers, lakes, channels and docks, and it can be used for the cleaning of reservoirs, docks, piers and harbors.
Two Side wire winches: 3.6 Kn remote control.
One ladder winch: 4.5 Kn
Ladder construction dredging depth (45°): 12 m...
lifting height 3600 mm lifting capacity 1500 kg centre load 600 mm fork length 115 cm width over forks 57 cm fork height 86 mm width between forks 230 mm turning radius 1342 mm total length 1656 mm total width 795 mm height mast at forks at 3600 mm 4043 mm height mast at forks below 2390 mm 2x 12v 125ah battery 1.27 kw traction motor 5.5 km/h no load 5.0 km/h loaded 3 kw lift motor lifting: loaded 130 mm/s no load 200 mm/2 lowering: loaded 130 mm/2 no load 130 mm/2 internal charger 24v Disadvant...
- New machine made entirely of stainless steel including washing pump
- Automatic basket drive
- Touch button to turn the basket outside of the cleaning procedure
- Tank cover and mesh filter under the stainless steel basket
- Protection against dry running
- Door security switch
- Connections for plate phase separator (oil separator)
- Inner basket width 790 mm
- Usable height of the basket to the lower edge of the nozzle holder
- Flat jet nozzles
- washing pressure 3 bar
lifting height 3300 mm lifting capacity 1200 kg centre load 600 mm fork length 115 cm width over forks 57 cm fork height 86 mm width between forks 230 mm turning radius 1342 mm total length 1656 mm total width 795 mm height mast at forks at 3300 mm 3871 mm height mast at forks below 2256 mm 2x 12v 85ah battery 0.65 kw driving motor 4.5 km/h no load 4.0 km/h 2.2 kw lift motor lift: 110 mm/s no load 210 mm/2 lower: 120 mm/2 no load 110 mm/2 internal charger 24v Disadvantages compared to Everlift s...
This listing is for a Cryonomic Cab 52 Dry Ice Blasting Machine .
It has not been tested but was working prior to factory closure .
Media used 3mm
Noise level 110 dB
Supply operation Electrical
Air supply pipe size 3/4 – 1″
Hose configuration Double hose
Air quality Dry and oil free
Control Panel On/off switch
Pellet feed Adjustable
20 – 105kg/hr
Operation Trigger Operated
Type of wheel rear Medium
Type of wheel front Small castor
Dimensions L x W x H (mm) 860 x 400 x 560
Used unitCondition: Function testedEquipment and technical data:Filling quantity: 60 lExhaust air volume flow: 280 l/hMax. Max. load: 60 kgCompressed air connection: max. 4 barLocation: High availability: Short term
Carpet cleaning machine, carpet cleaner, cleaning machine, spray extraction device
-Working width: 400 mm
-Fresh water tank
-Dirt water tank
-Connection 220 V
-Dimensions: 1000/420/H880 mm
-Weight: 70 kg
Field of application: Construction
Bucket capacity: 1 m³
Fits to following machines: Excavator 20-35 ton with CW45S quick coupler
Bucket type: Excavator bucket
Transport dimensions (LxWxH): 2000
Hydraulic Ditch cleaning bucket 2000 mm wide, CW45S quick coupler, Capacity 1000 Liter
Empty weight: 90 kg
Serial number: DPX-27508
EPA Marked: yes
Transport dimensions (LxWxH): 1 x 0.6 x 0.4
Automatic Transfer Switch - ATS Panel - ATI Panel
1250 Ampere - Applicable for generators up to 435 kVA
sweeping width 942 mm
working width Bodendüse: 700 mm
tank Reinigung: 79 l
tank Schmutzwasser: 83 l
weight of the machine ca. 145 kg
dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
- Exhibition machine -
- Most compact ride-on scrubber-dryer from DiBO with 2 brushes
- Possibility to dispense detergent: in ECO mode with constant
Saving or automatic regulation of the machine depending on the speed of the
Brush motors and suction: even less energy consumption, even more
Empty weight: 75 kg
Serial number: DPX-27505
EPA Marked: yes
Transport dimensions (LxWxH): 1 x 0.6 x 0.3
Automatic Transfer Switch - ATS Panel - ATI Panel
160 Ampere - Applicable for generators up to 110 kVA
In this offer you acquire a used stencil cleaning machine "Matthes M-SBC".
Object of sale:
1 x Matthes M-SBC
This offer is a used device, which may show traces of use.
(minor scratches or yellowing).
The device has been tested for function.
For further information you can of course also contact us personally.
Shipping is possible on request!
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.