Used injection molding machines with a clamping force of 250 - 999 kN for sale (253)

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Hnedpjzk D Dxsfx Apnsp

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,701 h, clamping force: 800 kN, Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details. • Clamping Force: 800 kN • Number of Injection Units: 2 • Injection Unit 1: Vertical, Ø22 mm screw Hnsdpfxszlqtcs Apnsp • Injection Unit 2: Horizontal, Ø35 mm screw • Operating Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Connected Load: 55.9 kW • Rated Current: 93 A • Control Voltage: 24 V DC • Protection Class: IP54 • Hydraulic Pressure: 210 bar • Rotary Table: Yes • Safety Enclosure: Yes • Pump Operating Hours: 35,290 h • Automatic Operating Hours: 28,701 h

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG Hnjdpjyvz Izsfx Apnop

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Clamping force: approx. 800 t Hsdpfx Aezlg Uvspnjnp Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Condition: excellent (used), Year of construction: 2018, operating hours: 16,500 h, clamping force: 600 kN, screw diameter: 20 mm, displacement volume: 31 cm³, injection pressure: 1,470 bar, Injection molding machine ENGEL Victory 60-28 Tech Stock No.: 503700 Manufacturer: ENGEL Type: Victory 60-28 Tech Control system: CC300 Year of manufacture: 2018 Operating hours: 16500 h Technical data, clamping unit Clamping force: 280 kN Platen size h x v: 500 x 450 mm Minimum mold thickness: 150 mm Maximum mold thickness: 550 mm Opening stroke: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Mold weight: 450 kg Technical data, injection unit Screw diameter: 20 mm Injection volume: 31 ccm Injection pressure: 1470 bar Screw length: 24 l/d Screw stroke: 100 mm Screw speed: 360 rpm Free injection flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions L x W x H: 3.4m x 1.3m x 1.8m Total weight: 2900 kg Equipment Hnsdeziz Edspfx Apnsp Screen display in German Screen display in English Screen display in Polish Hydraulic core pull, 1x Air valve, 1x Screw with high wear resistance and corrosion resistance Interface for color dosing system

Condition: ready for operation (used), Year of construction: 2010, operating hours: 80,000 h, clamping force: 800 kN, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, product length (max.): 4,090 mm, Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details. Hsdpfxszk Elwo Apnonp • Outer length: 670 mm • Outer width: 670 mm • Clamping force: 80.0 T • Screw diameter: 40.0 mm • Tie Bar spacing: 420 x 420 mm • Shot volume: 201.0 cm3 • Shot weight: 183.0 g • 6 heating zones • Hydraulic core • Includes a Sepro sprue picker with the machine

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Hjdpjygk Eiefx Apnenp

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 230999 Year of Manufacture: 2015 Operating Hours: 47,247 h Control System: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Thermoplastic screw/cylinder, 35 mm, highly wear-resistant 1 x blow-out Coloring interface - extended monitoring - extended movement sequence - extended clamping - production control - job change - complete documentation and software (on CF card) German language - from first owner - origin Germany - regular maintenance by the manufacturer and previous owner Visible peripheral devices are not included in the offer - only if they are explicitly mentioned. Injection unit Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit Clamping force: 50 tons / 500 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Hnsdpfov U Tl Dsx Apnsp Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - we only sell machines that we have purchased ourselves from current production, from our warehouse in Hanover. - all offered machines are checked and tested before dismantling. - we do NOT sell insolvency goods - we are NOT a broker dealing with third-party property. - all offered machines come from successful companies for which maintenance and care are a matter of course. - all offered machines are in our warehouse and can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 91,550 h, clamping force: 400 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2001. This Arburg 270 S 400-60 features a screw diameter of 25 mm and an additional cylinder suitable for Teflon processing. The machine is in working condition, with 98,077 pump hours and 91,550 automatic hours. If you are looking to get high-quality moulding capabilities, consider the Arburg 270 S 400-60 machine we have for sale. Contact us for further details. • Machine Pump Hours: 98,077 h • Automatic Hours: 91,550 h • Screw Diameter: 25 mm Hedpfx Apjzkh Rvenenp • Additional Cylinder: 25 mm (suitable for Teflon processing) • Clamping Unit: Closes without damping • Condition: Machine in working condition

Condition: ready for operation (used), Year of construction: 2005, operating hours: 84,936 h, clamping force: 350 kN, Hydraulic injection moulding machine manufactured in 2005. This Arburg 320 S 350-150 features a screw diameter of 20 mm and has a total of 90,567 pump hours. It is a standard model without special peripheral accessories. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 320 S 350-150 machine we have for sale. Contact us for further details. Hnsdpfszkh Rpox Apnjp - Pump Hours: 90,567 hours- Automatic Hours: 84,936 hours- Screw Diameter: 20 mm (shortened injection unit)- Standard model without special peripheral accessories (no material dryers or temperature control units included).

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,108 h, clamping force: 500 kN, screw diameter: 30 mm, Vertical injection moulding machine manufactured in 2007. This Arburg 370 U 500-170 features a screw diameter of 30 mm and includes 2 core pull controls. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 370 U 500-170 machine we have for sale. Contact us for further details. • Pump Hours: 20,108 h Hsdpfxjzkh I Is Apnjnp • Automatic Hours: 73,334 h • Screw Diameter: 30 mm • 2× Core Pull Control • Display Defect: Lines partially overlap on the screen

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Hnedpfxjyrczgs Apnep Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2005, clamping force: 400 kN, This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details. Hodpfx Apjzh Ey Asnjnp - Model: ALLROUNDER 270 C 400 - 100- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor Rated Current: 59 A- Heating Rated Current: 31 A- Total Rated Current: 90 A- Total Connected Load: 54 kW- Control System: Selogica Control Panel- Additional Equipment: Integrated part discharge conveyor belt- Space Requirement / Footprint: 3.2 qm- Total Power Requirement: 15 kW- Lubricating Oil Type: Hyspin SP32 (Hazard class A2)- Oil Capacity: 160 l- Standards Compliance: CE Marked- Equipment: Integrated conveyor belt, control panel terminal- Optional: A cooling system and a second machine are available for an additional charge.- Until now, both machines have been running on the same cooling system.

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: limited functionality, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 154 cm³, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control unit: MC5 Year of manufacture: 2008 Operating hours: 49,673 h Technical Data - Clamping Unit Clamping force: 800 kN Tie bar spacing (H x V): 520 x 420 mm Platen size (H x V): 640 x 740 mm Minimum mold height: 300 mm Maximum platen distance: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering diameter moving platen: 125 mm Centering diameter fixed platen: 125 mm Technical Data - Injection Unit Screw diameter: 35 mm Hodpfx Apszgt Eqonjnp Shot volume: 154 ccm Injection pressure: 2,429 bar Screw L/D ratio: 23 l/d Screw speed: 477 min⁻¹ Specific injection rate: 289 g/s (GPPS) Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 5.35 m x 1.7 m x 2 m Total weight: 6,500 kg Equipment Display language: German CEE outlet 16A 1x air valve Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 handling interface USB interface Schuko socket 10A 24x tool heating circuits

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Hnjdpfxezg T I Se Apnop Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg

Condition: used, Year of construction: 2017, operating hours: 38,672 h, machine/vehicle number: 214631, overall weight: 1,200 kg, This ENGEL Insert 500V/160 rotary vertical injection molding machine will be auctioned off online as part of our industrial auction/machine auction, location closure of J&S GmbH Automotive Technology - injection molding machines. You can find this and many other items on our platform. Year of manufacture: 2017 Serial number: 214631 Weight: 1,200 kg Operating hours: 38,672 hours (as of 02/2025, continued operation until 12/2025) with rotary platen with 2 x Single STL 1-12-30 TKN6, year of manufacture 2012/2013 Hnodpfx Aozk Hg Nspnsp with Piovan C5, year of manufacture 2017 with Piovan THW9 temperature control unit with Piovan MDP, year of manufacture 2013 with Universal Robots UR10e handling robot Functionality and technical data have not been verified without additional items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to reservation This lot will be auctioned off subject to reservation. After the auction closes, the seller will notify within 2 weeks whether or not the highest bid will be accepted. We will inform you promptly.

Condition: ready for operation (used), Year of construction: 2017, clamping force: 800 kN, Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details. • Tie bar distance (H × V): 420 × 420 mm Hsdpfx Apjyn E E Tsnsnp • Platen size (H × V): 595 × 595 mm • Mould height (min–max): 180–515 mm • Max opening stroke: 515 mm • Max daylight: 515 mm + mould height (depending on configuration) • Injection unit options: • Screw diameters: 18 / 25 / 30 / 35 mm • Shot volume: 22–116 cm³ (depending on screw) • Max injection pressure: up to 3000 bar (depending on screw diameter) • Max injection speed: 300 mm/s • Machine category: Fully electric (no hydraulics for main movements)

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Hodpfszl Ddhsx Apnjnp Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Hnjdpfx Asppigdspnsp Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Hnsdpfxjzkfh Ss Apnep Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational.

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Hnodpfxjzkfd Te Apnop Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Hnjdpfju Eu Tnox Apnjp Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. Hodpfx Apsy Au I Uensnp The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Hedpfx Asxzq Skepnsnp Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Hedsyiz U Topfx Apnonp Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.