Used Mc Km 250 for sale (31,211)

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, injection pressure: 2.387 bar, overall weight: 15,000 kg, TECHNICAL DETAILS Closing side Fsdpfx Aeu R Nuwed Nopp Drive type: fully electric Closing type: Fully hydraulic Construction: four-bar Closing force: 2,500 kN Panel size (h x v): 995 mm x 1,050 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: min. 330 mm, max. 0 mm Opening travel: 820 mm Plate distance: max. 1,150 mm Rotary table size D: 0 mm Ejector stroke: 200 mm Ejector force: 58 kN Centering D moving platen: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping platens: M20 Mold weight: 3,430 kg Dimensions (LxWxH): 6.50 m x 2.20 m x 2.30 m Total weight: 15,000 kg Spray side Screw diameter: 55 mm Stroke volume: 570 cm³ Injection pressure: 2,387 bar L/D ratio: 22 Screw geometry: 9 L/D Screw diameter: 55 mm Screw speed: 260 1/min Screw torque: 82.4 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 126 cm³/s Number of heating zones: 6 Nozzle contact force: 60 kN Nozzle travel: 82.4 mm Pump drive power: 45 kW Heating power: 23 kW Voltage: 400 V / 50 Hz Oil tank capacity: 720 l EQUIPMENT 2x temperature control point for hot runner On-screen text in German CEE socket 16A Pressure accumulator for increased injection performance Ejector or core pull parallel Core pull hydraulic 1x Air valve 4x Machine with material straightener Machine with water battery Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Low-wear plasticizing unit

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 90 mm, clearance between the columns: 1,000 mm, injection pressure: 1,742 bar, opening stroke: 2,000 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 356 kN Feed force of the moving opening platen: 98 kN Force of the moving closing platen: 92 kN Platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Fedpfxexup Nns Ad Njpp Mold opening stroke: 1,400 mm Minimum mold height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg Operating hours: 70,000 h

Condition: like new (used), Year of construction: 2009, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained used injection moulding machines. Year of manufacture from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current update – Tax note and advantage for used machines As of 01.07.2025, used machines can also qualify for a special depreciation of 30% per year. In addition to the more attractive price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E) Current images will follow in calendar week 46. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control Unit: MC5 Year of manufacture: 2009 Operating hours: 65,850 h Machine no.: 61013689 Material processed: PE and PP thermoplastics Extras: 2 additional robots: linear robot LRX 100 and LRX 50 - Single owner – from Germany Regular maintenance performed by manufacturer and previous owner Fsdpfx Asxqhuujd Nepp Clamping unit: Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Clamping platens: 995 x 1050 mm Max opening stroke: 820 mm Min mould height: 330 mm Max opening: 1150 mm Ejector stroke: 200 mm Ejector force: max 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, software Available immediately from our warehouse in Hannover/Germany, or delivered free to your door against reimbursement of shipping costs. The machine is offered fully function-tested. The machine is our sole property. The requested machine is immediately available in our warehouse in Hannover, offered as function-tested, and can be inspected under power. Information about the machines and our company: - We only sell machines acquired from running production, from our own inventory in Hannover. - All machines are inspected and tested before dismantling. - We do NOT sell insolvency assets – we do NOT act as brokers trading in third-party property. - All machines offered come from successful companies where maintenance and care are standard. - All machines offered can be inspected in our warehouse.

Condition: used, mileage: 561,000 km, power: 210 kW (285.52 HP), first registration: 05/2016, overall weight: 19,000 kg, fuel type: diesel, color: beige, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 7,600 mm, loading space height: 2,550 mm, Year of construction: 2016, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, soot filter, tail-lift, Refrigeration unit brand: Carrier Additional information: * Payload: 9,385 kg * Tyre type | First axle: Michelin * Tyre size | First axle: 315/70 R22.5 * Tyre tread depth inner left | First axle: 70% * Tyre tread depth inner right | First axle: 70% * Maximum axle load | First axle: 7,500 kg * Tyre type | Second axle: Michelin * Tyre size | Second axle: 315/70 R22.5 * Tyre tread depth outer left | Second axle: 80% * Tyre tread depth inner left | Second axle: 80% * Tyre tread depth outer right | Second axle: 80% * Tyre tread depth inner right | Second axle: 80% * Maximum axle load | Second axle: 11,500 kg * Wheelbase: 540 cm Fedpfx Adoxaipro Nopp * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Lifting capacity: 2,000 kg * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin wheels | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes * Tail lift | Type: Tiltable and sliding tail lift Additional equipment: * Anti-lock braking system (ABS) * Traction control system (ASR) * Automatic transmission * Power brake booster * Roof spoiler * Differential lock * Electric windows * Electrically adjustable exterior mirrors * Cruise control * Homepage * Air conditioning * Power steering * Air suspension * Fog lights * Emergency braking assistant * Parabolic suspension * Particulate filter * Radio/CD player * Spare wheel * Disc brakes * Side door * SemStars * Spoiler * Toolbox * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please enquire in advance about the costs and procedures for export to your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to modifications, prior sale, and errors.

Condition: excellent (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included Fsdpfx Adexhg Ihj Nepp screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. robot-system machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Fpodpfx Adouiykdj Nop

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9 Fodpouggb Defx Ad Nepp  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC Injection Moulding Machine Year of manufacture: 2001 Equipment: robot Technical details Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen force (opening): 98 kN Moving platen force (closing): 92 kN Platen dimensions (H x W): 1,610 x 1,530 mm Tie bar spacing (H x W): 1,120 x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Machine details Fsdpsxvb Dyofx Ad Nspp Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg

Condition: good (used), Year of construction: 2020, operating hours: 2,640 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, Equipment: air conditioning, hydraulics, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Travel speed (km/h): 60 Working width with 2 side brushes (mm): 2,625 Maximum working width with 3 side brushes (mm): 2,710 Hopper capacity (l): 2,500 Fresh water tank (l): 200 Fsdpfewzwakex Ad Njpp Optional fresh water tank (l): 390 Permitted total weight (kg): 6,000 Dimensions (L × W × H) (mm): 4,491 x 1,300 x 1,999 Particle filter Comfort seat Heating and air conditioning Heating Hopper: 2,500 l Radio system Rotating warning beacon Water tank: 120, 400 l Year-round use This KÄRCHER MC250 was built in 2020, has only 2,640 total operating hours and 1,820 sweeping hours according to the counter, and is in good overall condition with typical signs of use and wear, immediately ready for operation. Comparable new price: €200,000! - Gross price: €59,900 // Net price: €50,336 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized. Shipping costs depend on distance! - Attractive leasing/financing offers available through our leasing partner—contact us for details!

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 58 h, load capacity: 25,000 kg, lifting height: 11,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,198 mm, empty load weight: 28,240 kg, total length: 5,826 mm, drive type: Elektro, construction width: 2,150 mm, Pick & Carry Crane Mast type: Telescopic Condition: As good as new Technical condition: very good Front tires type: Non Marking Front tires Size: 355/50-20 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 355/50-20 Rear tires Condition: 80 - 100% Fpsdpfx Ajt Dd T Tjd Nop Fork positioner, Head and hook, jib (15t), jib and extension (7t), fork carriage (12t), optional hydraulic support 3rd valve, 4th valve, rear work lights, front work lights, full cab, CE certificate, non-creeping tires, self-propelled, exterior mirrors, joystick, rotating beacon, windshield wiper, single pedal, LED, seat, optional with radio remote control

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator Fpsdpsxhg E Hofx Ad Nep machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Fpedpfx Adjwut Hyj Nep

Condition: ready for operation (used), Year of construction: 2001, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 8000 - distance between columns (h x v): mm 1120 x 1000 - distance of mold opening max: mm 1400 - mold installation height min/max: mm 600/1100 - opening stroke of the clamping platen: mm 2000 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 Fedjnh Rwgopfx Ad Nepp - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 45 - dimensions of the machine (L x W x H): m 10,4 x 2,86 x 2,39 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Possible control updates to extend the lifetime of the plant - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Fpedpfx Asxqh I Ijd Nop Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: ready for operation (used), Year of construction: 2019, Propulsion type: Diesel EURO 6e, engine: 4 cylinders with DPF and SCR, engine manufacturer: VM, engine type: R754, engine power: 75kW, max. driving/working speed: 60km/20km/h, gradeability: 25%, working width with 273 working brakes: 2625mm/2710mm. Sweepings container: 2500l, fresh water tank: 200l, emptying height: 1600mm, turning radius: 2060mm. Dimensions X/Y/Z: approx. 4500mm/1300mm/2000mm, unladen weight: approx. 3800kg, permissible total weight: 6000kg, operating hours: 3214h, mileage: approx. 21000km. Documentation available. Fpjdpfxetzn D Ro Ad Njp

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN Fedsxak Ucjpfx Ad Nepp 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Year of construction: 2016, condition: ready for operation (used), Clamping force: 2500kN, injection unit: 1400CX, pump motor power: 45kW, plasticising system: HPS-UN, screw diameter: 60mm, injection volume: 820cm³, plasticising stroke: 82.4mm, tie bar spacing: 530mm. Machine dimensions X/Y/Z: approx. 6500mm/2100mm/2300mm, weight: approx. 15000kg, control: MC6, pump hours: 42115h, automatic hours: 39148h. Includes conveyor belt MK GUF-P 2000 AF. Documentation available. An on-site inspection is possible. Expected to be available from December 2025. Fedew Exrpepfx Ad Nepp

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Control type: MC 4 Number of operating hours 93 900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Maximum mould height: 1800 mm Maximum daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Fjdpfswq Ed Aox Ad Nopp Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Shot weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Fpjdpfx Adsw A N Hfo Njp Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 8M2807A, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection pressure: 1,389 bar, injection weight: 6,098 g, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm Fpodpfsvpg Nfox Ad Nep MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l

Condition: excellent (used), mileage: 31,000 km, power: 185 kW (251.53 HP), first registration: 07/2008, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 285.70.19,5, fuel: diesel, wheelbase: 4,850 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, trailer coupling, = Additional Options and Equipment = - Armrest - Outside temperature display - Work lights - Beaker holder - Power brake booster - Sunroof/hatch - Differential lock - Tachometer - Electric windows - Electrically adjustable exterior mirrors - Extra lighting - Driver airbag - Height-adjustable driver’s seat - Remote central locking - High beam - Speed limiter - Tinted glass - Refrigerator - Air horns - Air suspension - Awning - Multiple beds - Microwave - Center armrest - Fog lights - Radio/CD player - Spare wheel - Reverse camera - Full service history - Sleeper cab - Side door - Power steering - Sun visor - Auxiliary heater - Stand-alone air conditioning - Immobilizer - Tachograph - Toolbox - Winch - Power take-off (PTO) - Power take-off (PTO) = Additional Information = Technical specifications Number of cylinders: 6 Engine capacity: 5,880 cc Drivetrain AdBlue system: Yes Fpodjv Ii T Rspfx Ad Njp Fuel tank: 200 liters Transmission Gearbox: 8-speed, automatic Axle configuration Tyre size: 285/70 R19.5 Brakes: disc brakes Suspension: air suspension Front axle: Max. axle load: 4800 kg; Steering axle; Axle brand: MICHELIN XDE-2; Left tyre tread: 70%; Right tyre tread: 70% Rear axle: Twin tires; Differential lock; Max. axle load: 8500 kg; Axle brand: XZE-2; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60% Dimensions Dimensions (L x W): 895 x 245 cm Weights Unladen weight: 7,190 kg Payload: 4,800 kg Gross vehicle weight: 11,990 kg Body Bodybuilder brand: ALISON AUTOMAAT Loading platform height: 105 cm Maintenance APK (Technical Inspection): New TÜV upon delivery Documents Manuals: Available Condition Technical condition: very good Visual condition: very good Damages: none = Company Information = Nidro cars Holland is located in the center of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price.' For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, functionality: fully functional, overall weight: 20 kg, -KOM 3124- Offered here is a used Brinkmann submersible pump, model TA 302/250. The pump can be mounted directly on a tank. Dimensions: approx. (550 mm x 180 mm x 210 mm) Submersible depth: 250 mm Weight: approx. 20 kg Voltage: 230/400 V Frequency: 50 Hz Current: 4.3 / 2.5 A Speed: 2850 rpm Fedpfswl U Aqex Ad Njpp

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location Fedpfev Uqwdsx Ad Njpp - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump 250 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photo ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fpodoi D Hkbjpfx Ad Nsp

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, rotary lobe pump, mono pump, dosing pump, high-pressure pump, screw pump, eccentric screw pump, hopper pump, eccentric spindle pump -Manufacturer: Blackmer, rotary piston pump type MC-1251_ATX-ST-CVT-1/2B SP-SI/1P-S/D-C100 -Motor: HEW 0.37 kW / 1350 rpm explosion-proof Fodpexm Rmlefx Ad Nopp -Gearbox: North 408 rpm -Flow rate: m³/h -Delivery head: m -Pipe connection: see photos -Dimensions: 720/230/H200 mm -Weight: 38 kg.