Used injection molding machines with a clamping force of 250 - 999 kN for sale (251)

Condition: used, Year of construction: 2003, Vertical pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: RUTIL Type: VERTICALE DAS 100/30 RP Year of manufacture: 2003 Technical parameters: Injection volume: 100 cm3 Injection pressure: 1480 kg/cm3 Nozzle diameter: 22 mm Hydraulic motor: 75 cm3 Max. operating pressure: 200 kg/cm2 Heating plates: 350 x 300 mm Ijdjuntc Ejpfx Aalohw Closing force: 30 tons Minimum form: 130 mm Movable plate lifters: 350 mm Installed power: 21 kW Dimensions: width: 1400x1700 mm, height: 3050 mm Weight: 3300 kg . Full technical documentation. Technical condition: used machine, working until taken out of production

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Ihodpfx Ajx N A Dqealjw

Condition: good (used), Year of construction: 2004, CLAMPING UNIT – Ergotech EXTRA 110 Clamping force: 1100 kN Locking force: 1100 kN Max. opening stroke: 600 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. daylight between platens: 850 mm Platen size: 670 × 670 mm Distance between tie bars: 470 × 470 mm Max. mould weight: 1000 kg Max. mould weight on moving platen: 680 kg INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm (B) Specific injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 205 g Max. screw stroke: 184 mm Nozzle stroke: 300 mm Isdpfex Urxnjx Aalshw Nozzle immersion (SVO): 40 mm Nozzle contact force: 60 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Hopper capacity: 35 l

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic • Screw diameter: 25 mm Ihjdpfx Ajxl Hpgjalew • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm • Heating capacity: ~11 kW

Condition: used, Year of construction: 1999, Krauss Maffei 80-220 C2 (1999) Clamping force: 80 t Ihedewufwqspfx Aaljw Screw diameter: 35 mm Shot weight: 115 g Distance between tie bars V: 405 mm Distance between tie bars H: 405 mm Injection pressure: 1837 bar Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Iodpfjr Hrqrex Aalehw Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: excellent (used), Year of construction: 2009, operating hours: 63,700 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 270S400-70 Baujahr: 2009 Schließkraft: 40 Tonnen Holmabstand 270 x 270 mm Schnecken DN: 18 mm Dosiervolumen: 23 ccm³ Spritzteilgewicht 21 g/PS Steuerung: SELGOCIA Ausstattung: -Schnittstelle Roboter Ihsdpjxq R D Esfx Aalew -Vertikale Einspritzung Betriebsstunden: ca. 63.700 Hours

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 161746, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, injection weight: 59 g, mold height (min.): 250 mm, opening stroke: 750 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,014 mm, overall weight: 3,850 kg, heating capacity: 4.2 kW (5.71 HP), pump power: 22 W, power: 32 kW (43.51 HP), input frequency: 50 Hz, input voltage: 400 V, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. Isdpfx Aex Srizealohw A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 2001, operating hours: 57,430 h, functionality: fully functional, machine/vehicle number: 183899, clamping force: 600 kN, overall weight: 2,330 kg, Arburg injection moulding machine for sale Year of manufacture: 2001 Condition: Very well maintained, regularly and promptly serviced Inspection: Was in operation until recently, currently still connected to power and available for on-site inspection at any time Ready for use: Immediately available and fully functional Iedpfx Aaoxdz I Usljhw The machine is in very good condition and is ready for immediate use. The machine is sold without tooling and conveyor. More details on request.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 44731, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, injection weight: 47 g, mold height (min.): 200 mm, opening stroke: 550 mm, total length: 4,000 mm, total width: 1,163 mm, total height: 1,787 mm, overall weight: 2,300 kg, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved. Iedpfsx Srggjx Aalohw

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. Ihjdpfjx Spw Ajx Aalew You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Hersteller: ENGEL Ihedpfx Asxzq Skoaljw Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs

Condition: used, Year of construction: 1996, operating hours: 52,000 h, functionality: fully functional, machine/vehicle number: 30391, clamping force: 650 kN, overall weight: 9,000 kg, Machine is ready for transport. Operational and set up for use. Excluding temperature control unit, extraction, conveyor belt, and hopper. Installation height 250 mm. Including robot and safety cage. Ihjdpfx Asxfi Sqoaljw

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP Iodpfsvdqbhsx Aalshw

Condition: used, Year of construction: 2001, operating hours: 36,589 h, functionality: fully functional, clamping force: 450 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 80 g, mold height (min.): 180 mm, opening stroke: 350 mm, plate width: 550 mm, plate height: 330 mm, installation height: 350 mm, The Engel ES200/45 HL Victory machine can be inspected at any time; the machine is connected to power and fully operational. Tie-bar-less design. Isdex Ex Nbepfx Aalohw

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1999 Operating hours: h Machine number: 178930 Type / Model: 270C-300-100 Clamping force: 30 t Min. mold installation height: 225 mm Max. opening stroke: 325 mm Max. platen distance: 500 mm Clear tie-bar distance: 270 x 270 mm Platen size: 400 x 400 mm Screw diameter: mm Max. dosing volume: 90 cm³ Shot weight PS: 80 g Holding force: 31 kN Connection: 25 kW Accessories/equipment: 1 core puller Condition: good Weight: 1.8 t Dimensions: 3,700 x 1,700 x 1,800 mm Ihodpfsxf Dxrex Aalew

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 Ihodpfx Aastltvzjljw WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Condition: excellent (used), Year of construction: 2006, Arburg 370U 700-290 Ijdewnz Ekjpfx Aaljhw Year of construction 02/2006 Control Selogica Operating hours: approx. 82,500h (pump) Screw diameter 35 mm Fuel weight: approx. 132gr/hp Spar spacing 370 x 370mm Extras: Core pull Handling interface Machine weight: 3500kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: like new (used), Year of construction: 2008, Arburg 320C 500-170 Year of construction 05/2008 Control Selogica Operating hours: approx. 60,000h (pump) Ihjdpfxswnz D Ts Aalsw Screw diameter 35 mm Fuel weight: approx. 105gr/hp Distance between spars 320 x 320mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 2200kg incl. removal device from the company. Star Year of construction 11/2007

Condition: excellent (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 014707, clamping force: 350 kN, As new! Fully functional machine. Extensive equipment: 2x limit switches / 2x air blow valves / EM13 / interface for water temperature control units / bi-metal / separating flap / B&R Smartmold control unit. Ihodpfxjxtmrdo Aaljw

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Ijdpfx Aasu E Id Toljhw Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Ihodpfx Aaju E E H Sjlow Hersteller: ARBURG Typ: 570S2200-400/170e² Baujahr: 2010 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Ihsdpfju Eu Tnjx Aaljw Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Iedpfxowl Rucs Aalohw Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Iedpjwm Iyfofx Aalshw Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg