Used machining centers (universal) over 1000mm X-axis travel for sale (156)

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Hfodpjxuqv Aofx Aaled Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2006, machine/vehicle number: 86684, functionality: fully functional, operating hours: 51,929 h, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, total height: 3,210 mm, total length: 10,000 mm, total width: 4,500 mm, controller model: Siemens 840d + Shopmill, rotational speed (max.): 8,000 rpm, Equipment: chip conveyor, documentation/manual, with cross slide, SK 50, machine has a swivel head, plus Rotary table d= 800mm, traveling column and headstock made of high-quality machine casting, direct measuring systems in the basic axes X/Y/Z, power: 75 KWA, control voltage: 24 V, frequency: 50 Hz, back-up fuse: 16 A maximum, circuit diagram:86684, including: Rotary table, adaptive, diameter 800 mm, coolant pump: with 4 x Grundfos motors, and 1 x Walther Flender motor, extraction unit: type: ESB 300/38.1 with 37 kW, serial number: 6861-001 and Flender motor, cooling system from Rittal, tool magazine with 78 places Hedpfsw A Hntex Aaljfd Dismantling by the buyer, on-site support for loading, inspection recommended.

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing * Hsdpswltwmofx Aalefd

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA Hsdpfstq Nlcjx Aalsfd weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Year of construction: 1996, condition: good (used), machine/vehicle number: Nr.: 171, BAZ Alzmetall 35 CNC incl. chip conveyor Hjdpfx Ajhfwq Ejaljfd data see photos Dimensions LxWxH 3700x2270x2820 mm chip conveyor 800x4000x1500 mm Function untested

Condition: used, Year of construction: 2008, MAZAK - INTEGREX E-800V/5II - 2008-3 - system Mazak Matrix Cam (MT) - continous 5 axis - X/Y/Z moves 1100/800/900 mm - B axis range from -80 to +1020 mm - head C axis 90 degree - table indexing 31x5 degree with clamp or 3600000x0,0001 no clamp - taper BT 40 - spindle 12000 RPM/ 18.5 kW - ATC 80 Hfjdpfx Ajylzqyealsd - 22500 kg - more datas between photos

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Hfedpfx Aaoxnkkaeljd Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: excellent (used), Year of construction: 2003, Deckel Maho DMU200P Year: 2003 Control Heidenhain iTNC530 Travels X: 2000 mm, Y: 1800 mm, Z: 1100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Table size 1700 mm x 1400 mm Spindle max speed 12000 rpm Spindle nose SK50 Tool changer 60 Positions Accessories/options: Through spindle coolant, (IKZ) 40 bar Swarf conveyor Touch probe Heidenhain TS642 elektr. Handwheel Heidenhain Hodpfx Aasx Swbcolsfd Tool measuring system Blum Laser

Condition: excellent (used), Year of construction: 1982, Make: OERLIKON Type of machine: FM3 Year of manufacture: 1982 Control system: HEIDENHAIN x-travel: 1300 mm Speed range: max. 1120 U/min Control: conventional Machine's weight: 6 t Hedsi If N Iopfx Aalsfd

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: 4th axis IKZ (internal coolant supply) with 40 bar Swivel head with 1° increment Hfodpfx Aajx Sv A Soled 3D wireless probe

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Hfjdsxwlgzjpfx Aaljd Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm Hfsdpfxexmag Ie Aalod tool taper HSK 100 swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec max. tool diameter 250 mm max. tool length 400 mm max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards - incl. 1x workbench - incl. Ringler chip extractor

Condition: used, Year of construction: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 Hodpfx Aaexbh D Doljfd turning speed range - main spindle 12.000 min/-1 power capacity - main spindel 18 kW table surface area 1.200 x 600 mm rotary table diameter Ø 500 mm swivellable +15/-95 ° rotatable 0- 360 ° max. table load 1000/350 kg tool taper SK 40 number of toolpositions 30 pos. internal coolant system feed 20 bar rapid traverse ( X / Y / Z ) 30 m/min dimensions 5,0x 2,5 x 3,3 m weight of the machine ca. 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spindle in 2016 at 20.800 Spindle hours

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 Hodpfjwf Rgfex Aaljfd swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Hfedpfxewmm D Ns Aaled Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm Main Spindle Speed range: 20 - 5,000 rpm Gear stages: 2 Drive power: 30 kW (100%) / 45 kW (40%) Torque: 1,050 Nm / 1,580 Nm Tool holder: HSK 100 B-axis swivel range: +/- 180° Hjdpfsxb A Azox Aalsfd B-axis increment: 0.001° Work Table Clamping area: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Tool Magazine Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 s Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feed Rates Feed rate X, Y, Z: 0 - 20,000 mm/min Feed rate B: 10 min⁻¹ Power X, Z: 15.7 kW Power Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N MACHINE DETAILS Space Requirements & Weight Space requirement approx.: 8.0 x 8.0 x 3.3 m Machine weight approx.: 23,000 kg EQUIPMENT 2x tool cabinets for holders Ringler chip extractor Chip conveyor Coolant system High-pressure cooling Internal coolant supply Oil mist extraction Paper band filter Spindle oil cooler Blum TC 60 probe Electronic handwheel Automatic door

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!! Hfodpfxoxvlrbe Aalsd

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque Hfjdpjxt En Dsfx Aalsd • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Year of construction: 2005, condition: ready for operation (used), DESCRIPTION: Control: BOSCH – 3osa TFT color screen TECHNICAL SPECIFICATIONS Machine has double spindles, these can be moved in height independently of each other. 4 x hydraulic chucks diameter 300mm 2 x left, 2 x right with partition for pendulum operation - if required, the partition can be removed to process long parts Workspace: X axis 3500mm Y axis 600mm Z axis 700mm Drive power (40% ED) 32 kW Speed ​​range 20 – 9000 rpm Tool holder SK 40 Number of tools 2 x 36 EQUIPMENT/ACCESSORIES Hfjdei Ikytjpfx Aalsd • Workroom full encapsulation with roof, completely closed work space; the loading doors are designed in such a way that loading with a crane is possible when open • Double work area lighting •Safety fence attached to machine •Coolant filter system •Internal coolant supply through the spindles, 20 bar •Flush gun •Chip conveyor •Oil central lubrication •Oil suction •Control cabinet cooling •Direct measuring systems (all axes) •3D probe with radio •Installation elements •Documentation The machine listed here is very powerful and is designed for quantities for milling and drilling work and can be inspected under power.

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the item within the specified period: between 01.12.2025 and 05.12.2025. TECHNICAL DETAILS Travel distances X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Main spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine stations: 46 Max. tool diameter (full magazine): 80 mm Max. tool diameter (partial magazine): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feeds and Rapid Traverses Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine operating hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe system Technical documentation Hfjdpfx Aaexxzqrsljd Note: Transport is expected to be carried out by a truck with a loading width of 3,000 mm.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 5,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 800 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, AXA VHC 2 - 5000M Retrofit Siemens 840C SK40 / 36 tools Table 5000x500mm Coolant 700l Good condition. Can be inspected under power with chips. Hfsdpfxsw Tkz Re Aalod

Condition: good (used), Year of construction: 2019, functionality: fully functional, operating hours: 1,994 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, mount diameter: 100 mm, number of spindles: 1, spindle speed (max.): 10,000 rpm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Hsdpfx Aaovvmnujljfd Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: good (used), Year of construction: 1999, x-travel 2400 mm Hodpfxevwgpho Aalsfd y-travel 2850 mm z-travel 1000 mm Control FIDIA C20 table dimension - longitudinal 2200 mm table dimension - cross 1800 mm table load 12 t workpiece tool changer 30-fach tool taper ISI SK-50 spindle turning speed range 5000 U/min power capacity - milling spindle 30 kW

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Hfedpfx Aew N Nvfoaljd

Condition: good (used), Year of construction: 1999, Hermle U 1000 T, Built in 1999, Hfodpowlqimefx Aaljd Heidenhain TNC 426 control, X/Y/Z travel 1000/630/550 mm, 16-station tool changer, SK 40 tool holder, Spindle speed up to 7,000 rpm, Vertical spindle quill stroke 75 mm, Universal milling head 0-90°, Direct measuring systems, Table size 1200 x 630 mm, Heidenhain TS 632 touch probe, Electronic handwheel,