Used Tos Galanta for sale (668)

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U Nledpoxp Rzbjfx Amnjb weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nledpfx Amey T E Iteneb

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Empty weight: 9.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 6000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Nsdpfx Ameyg Hi Rsnolb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1990, CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Procedures: X1000mm Y500mm Z500mm Nsdpjdtfhqsfx Amnolb Spindle retainer: ISO 50.

Condition: used, Year of construction: 2011, Vertical milling machine TOS Olomouc Year of manufacture 2011 Lightly used With pneumatic tool changer Nodoy Uuxdspfx Amnjlb With digital display

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Thickness: 105 mm Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Nsdpfx Amjy Rxrtjnjlb Four-jaw chuck Steady rest

Condition: used, total length: 4,500 mm, total width: 1,600 mm, total height: 1,500 mm, Colour: Grey Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 0440922 - Drive system: Conventional - Power [kW]: 18.5 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 3000 - Bed width [mm]: 580 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 1120 - Options: Three-jaw chuck, Four-jaw chuck Nlodpfx Amox Ryv Toneb - Transport dimensions: 4500mm x 1600mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Nsdpfxowvht Re Amnelb Year: 2015

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Njdpfx Amsy H Dahenjlb Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Working area Nedsy Ug U Djpfx Amnjlb Maximum turning diameter 400 mm Maximum turning length 5000 mm Swinging diameter over bed 840 mm Swinging diameter over carriage 530 mm Spindle speed 14.6 – 1250 rpm Drive power 18.5 kW Dimensions 8.0 × 1.9 × 1.7 m Weight approx. 6.3 – 8.2 t

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m Nlsdpsx U Encjfx Amnjb

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m Nlsdpfsu Nkm Esx Amnjb T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 Nljdpfxsu Nlg Ts Amnob -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 Nodpfx Aou Ng Dgomnslb equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 Njdpfx Aeu Nkrbomnjlb a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm *

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm Nledpfow Hbnvjx Amnsb – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Nlodsxdwkfepfx Amnob Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: used, Year of construction: 2002, spindle diameter 130 mm x-travel 3500 mm Nsdpoyqvqrefx Amnelb y-travel 2500 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, Boring machine Nljdjx A Ayiepfx Amnsb Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel distances: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle connection: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard completely overhauled with a new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 19526ä

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm Nlsdpoyzptiefx Amnob folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Nlsdpfjh U Rznex Amnjb Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0443848, center height: 625 mm, center width: 8,000 mm, spindle speed (max.): 355 rpm, bed width: 800 mm, TECHNICAL DETAILS Swing diameter over bed: 1,250 mm Swing diameter over slide: 1,100 mm Center height: 625 mm Distance between centers: 8,000 mm Bed width: 800 mm Spindle bore: 1,100 mm Spindle speed range: 1.8 - 355 rpm MACHINE DETAILS Nedpfx Amoy Hit Honslb Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 10,730 x 1,600 x 2,400 mm Unladen weight: 12,000 kg Transport packages: 3 EQUIPMENT Fixed steady rest Four-jaw chuck Three-jaw chuck

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 Nljdjy Ix Ngjpfx Amnjb 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for X/Z axis Center height: 400 mm Distance between centers: 3000 mm Weight between centers: 500 kg Z-axis travel: 3250 mm Positioning accuracy X-axis: 0.001 mm Tool holder for workpiece spindle: MK 5 Tool holder for tailstock: MK5 Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with full enclosure Preparation for dust extraction system included Separate screen, touch probe control, automatic balancing and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Nedpfxsv N D Hbo Amnjlb Immediately available. Optional filter system available in various designs.

Condition: used, Year of construction: 1991, total length: 10,730 mm, total width: 1,600 mm, total height: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 0443848 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 625 - Swing over bed [mm]: 1250 - Carriage turning diameter [mm]: 1100 - Distance between centres [mm]: 8000 - Bed width [mm]: 800 - Spindle bore [mm]: 1100 - Min. spindle speed [rpm]: 1.8 - Max. spindle speed [rpm]: 355 - Options: Fixed steady, Four-jaw chuck, Three-jaw chuck - Transport dimensions: 10730mm x 1600mm x 2400mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Nlodpoy E Imvefx Amneb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum