Used Tos Sn 40 for sale (25,467)

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Tedpfjw U Aahox Aa Isc Fixed table

Condition: good (used), functionality: fully functional, For sale is a robust TOS Trenčín SUI 40 guide and lead screw lathe with a center distance of 1,500 mm. This machine comes from an industrial setting and impresses with its massive cast iron construction, high rigidity, and excellent smooth running. The proven SUI series from TOS is one of the most durable conventional lathes in its class and is still valued today in industry, toolmaking, and training workshops for its precision and reliability. The machine is in a well-maintained, used condition. All essential components are present. The machine bed shows a good overall condition; guides and supports appear well-maintained. The mounted three-jaw chuck, four-position tool holder, tailstock, and safety guard are included in the offer. Equipment: ✓ Center distance 1,500 mm ✓ Massive machine bed ✓ Guide and lead screw ✓ 3-jaw chuck ✓ Four-position tool holder ✓ Tailstock ✓ Coolant system ✓ Safety guard on the chuck ✓ Emergency stop switch ✓ Industrial version Application areas: Ideally suited for: Mechanical engineering Toolmaking Tsdpfozmp Tkjx Aa Ioc Maintenance Workshops Repair shops Training workshops Single-piece and small-batch production Condition: Used Good overall condition Signs of wear consistent with age Inspection is highly recommended Sale from the current location

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW Tedpfx Aewzkywsa Iec • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: excellent (used), Year of construction: 1969, BHU 40/1500 TOS Hostivar Cylindrical Grinder Grinding diameter 400 mm Grinding length 1500 mm Maximum workpiece weight 300 kg Grinding wheel: 600 x 150 mm Longitudinal travel of the table (x-axis): 1 – 1790 mm Tsdpfx Aaozg H E Re Ioc Grinding head swivels +/- 45° Table swivels +/- 5° Spindle taper: Morse 5 Maximum rotational speed of the grinding wheel spindle: 1240 rpm / 2100 rpm Total power consumption: 22 kVA Machine weight: approx. 7000 kg Cooling system: none Accessories: none

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Tjdpoylpqhjfx Aa Ioc Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Year of construction: 1998, condition: used, Speed: 12.5-2000/min, with documentation. An on-site inspection is possible. Tsdpfx Aajz Da I Rj Isc

Condition: good (used), functionality: fully functional, TOS FNG40 CNC milling machine with Heidenhain 407 CNC control. Spindle speed: 10-3150 rpm Feed rate x, y, z: 3000 max. Rapid traverse rate x, y, z: 9000 max. Work area: X 500mm, Y 400mm, Z 400mm Tool holder: ISO40 Hydraulic tool clamping Work table dimensions: 700mm x 400mm Shipping data: Weight: 2600 kg Dimensions (length x width x height): 2.40 x 2.40 x 2.00m Tedpfezhia Tjx Aa Iec

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service. Tjdpszphf Dofx Aa Ioc

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment. Todjxf Inkopfx Aa Iec

Year of construction: 2001, condition: ready for operation (used), Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible. Tjdpfew Nq R Rox Aa Ioc

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm Tsdpfxexp Rzbs Aa Ioc turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Comes with several accessories. Tedpfszgak Tox Aa Iec

Condition: ready for operation (used), Fanuc A06B-6164-H311 #H580 amplifier VSP 20/20/40-7.5 SN V12145477, used, in good condition, 100% functional, delivery as shown in photos Tedox Erggspfx Aa Ioc

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table Tjdpfxsxpudtj Aa Iec - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 Tsdpfx Aajd N Smhj Ijc weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Todpfx Aaezf Nd Hs Ijc Total power: 6.6 kVA Machine weight: 1760 kg

Condition: good (used), Year of construction: 1996, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 36 rpm, table width: 400 mm, table length: 1,400 mm, overall weight: 4,980 kg, input frequency: 50 Hz, Brand: TOS - Huvema Model: FGS32/40t Year of manufacture: 1996 Serial number: 23700080 Tjdpfx Ajydk E Rja Isc Capacity (kW): 11 Voltage: 3x 380 V Frequency (Hz): 50 RPM: 35.5 - 1800 Dimensions (LxWxH, mm): 2300 x 2300 x 2700 Weight (kg) approx.: 4980 Stock quantity: 1 Manufactured in: Czech Republic Table dimensions (mm): 1400 x 400 Digital display brand & model: Ditron D60-3V X-Y-Z Comments: Optical condition good Longitudinal travel (mm): 1000 Cross travel (mm): 400 Vertical travel (mm): 450 Terms of sale: Sold as is.

Condition: ready for operation (used), Fanuc A06B-6164-H311 #H580 Amplifier VSP 20/20/40-7.5 SN V12145549, used, good condition, 100% functional, scope of delivery as per photos Tsdpfjrcuz Ejx Aa Iec

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Make: TOS Type: SN / SIU Year: 90 Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Tsdpfxjzdiuxj Aa Ioc

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Make: TOS Tsdjzdiv Aopfx Aa Isc Type: SN / SIU Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), turning diameter over bed 430 mm Tsdpfx Ajy Hxq Uja Ijc turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,200 mm, total width: 2,000 mm, total length: 2,250 mm, type of input current: AC, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, table load: 250 kg, overall weight: 2,200 kg, input voltage: 400 V, space requirement height: 2,400 mm, input current: 8 A, input frequency: 50 Hz, Equipment: documentation/manual, Due to restructuring measures, we are selling our conventional milling machine – Intos FNGJ 40. - Year of manufacture: 2003 - Good condition for its age - Work table: 800(X) x 400(Y) mm - Travel ranges: X 600 x Y 400 x Z 400 mm - Spindle: 63 – 3,150 rpm - 4 kW via gearbox - Driven axes: X, Y, and Z (feed and rapid traverse) - 3-axis Heidenhain digital display - Stable machine with solid guides - Weight: 2.2 tons - Identical in design to EMCO (these were later manufactured at the Intos plant) - Fully functional Tedpfxsz Afdde Aa Iec - Various tool holders, vises, etc., can be purchased depending on the agreed price - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made without any warranty. Collection only (EXW) – no shipping.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm Tjdpfx Aaextabxo Ijc – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Tsdpfjfg Ep Dex Aa Ioc Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1990, CNC milling machine, manufacturer: TOS, type: FGS40CNC Control system: Heidenhain TNC 355, year of manufacture: 1990 Tedpfx Ajdtfhqoa Iec Travel distances: X 1000 mm, Y 500 mm, Z 500 mm Spindle mount: ISO 50.