Used machining centers (universal) over 1000mm X-axis travel for sale (156)

Condition: used, Year of construction: 2007, Technical details: x-travel: 1.250 mm y-travel: 710 mm z-travel: 710 mm table surface area: 1500 x 800 mm table load capacity: 800 kg turning speeds: 12000 1/min spindle drive: 15 / 10 kW control: MILLPLUS iT HEIDENHAIN spindle taper: SK 40 tool change unit: 60 Pos. capacity: 44 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, Hfedjya Amxspfx Aalsd internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on" *

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 850 mm, Travel Paths X-axis: 1760 mm Y-axis: 600 mm Z-axis: 850 mm Vertical distance table – spindle nose: 0 – 820 mm Horizontal distance table – spindle nose: 180 – 1030 mm Spindle & Drives Hfjdpfoydmprex Aalsd Spindle speed range: 30–12000 rpm Swivel head B-axis: interpolating B-axis travel range: -100 to 100 Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Rotary Table RTA 4-TF-630 Table diameter (vertical rotary axis): 630 mm Weight: 595 kg Tool Changer Tool holder: HSK A 63 Tool pockets: 42 Machine Dimensions Length / width / height: 6850 / 3450 / 3100 mm Weight: 19 t Accessories: – Documentation – Measuring probe

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Hfodpfx Aexxamxoaljd Inspection An inspection under power can be arranged at any time by appointment. Condition: Used condition consistent with age and prior usage Known defects: X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: good (used), Year of construction: 2006, Technical details: Hsdpjych D Uofx Aalofd X 1000 mm Y 1150 mm Z 895 mm 15.000 rpm, HSK 63, 92 places in tool changer, Touch probe will come, laser measuring system. Coolant thru spindle. Parts shown by hand not come. Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2013, operating hours: 87,327 h, functionality: fully functional, We offer you: Universal CNC machining center Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical specifications: Travel distances: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Hfsdpfoyhbcuex Aaled Max. spindle speed: 18,000 rpm Drive power - main spindle (100/40% ED): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & equipment: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - In-process tool measurement, type: BLUM Laser NT Hybrid - Coolant supply 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D path control - Infrared measuring probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal tower - Rinse gun with pump - Operating mode 4 - Machine adaptation for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partly with additional Viton/felt wipers - Sealing air for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adjustment of the maintenance plan for steel covers - Interface for camera monitoring and integration into the control system - Machine equipped for vacuum operation, including: - 2-channel rotary union, special centering bush and cable conduit in T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum port) - Integration of vacuum monitoring with terminals for NC stop and error message "Vacuum error" - Oil-resistant rubber hose secured by 2 clamps at the rotary union - Evaluation of "minimum level" error in feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use of spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides in X, Y, and Z axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly listed in the additional information. Technical data, information, and interim sale subject to change and errors!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Universal machining centre, 5-axis simultaneous Travel X: 800 mm Travel Y: 700 mm Travel Z: 600 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 80 Control: Heidenhain 530i Total power requirement: 59 kW Machine weight: approx. 10,600 kg Hodpfx Ajypaqmsalsfd Documentation/Manual, infinitely variable spindle speed, chip conveyor Number of magazine positions: 40 in tool magazine

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Hodpfx Aaeykb A Holsfd Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt Hsdpfx Ajttv Hajalsfd The machine is available at short notice and can be inspected and tested at the factory.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,795 h, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840 D ShopMill, rotational speed (max.): 6,000 rpm, The sliding surface of the base carriage X/Y was renewed in 2022! TECHNICAL DETAILS Travel range X-axis: 1,760 mm Travel range Y-axis: 600 mm Travel range Z-axis: 800 mm horizontal Travel range Z-axis: 770 mm vertical A-axis: ±100° Faceplate diameter: 520 mm Hedpfsyfriaox Aaljfd Rapid traverse X/Y/Z: 40/40/30 m/min Number of controlled axes: 5 Spindle speed range: 30 - 6,000 rpm Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool stations: 36 MACHINE DETAILS Control: Siemens 840 D ShopMill Dimensions & Weight Required floor space (L x W x H): 5.2 x 3.4 x 3.3 m Machine weight: 12,000 kg Operating hours: 41,795 h EQUIPMENT NC rotary table AXA RTA 4L-520 Manual tailstock, center height 280 mm Internal coolant supply (IKZ): 30 bar Chip conveyor, discharge left Integrated coolant tank 200 l Coolant tank 400 l 3D touch probe, Renishaw RMP 60 with RMI receiver Direct linear measurement system Heidenhain Hardened flat guides Counter-guides coated with sliding material (Turcite)

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens Sinumerik 840D, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,300 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle speed range: 50 - 18,000 rpm Tool holder: HSK 63 Tool positions: 30 Table size: 1,400 mm x 750 mm (right side) MACHINE DETAILS Control: Siemens Sinumerik 840D EQUIPMENT NC rotary table 800 (left side) Chip conveyor Internal coolant supply (IKZ) Hfedpfx Ajyfq T Dealjd

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Hedpfoyaa Sfox Aalefd Tools and vices can be taken over if required.

Condition: used, HEDELIUS RS 60 MAGNUM-2000 is a 5-axis machining center engineered for precision, high accuracy and reliable performance. Working capacities: table 1,200 x 600 mm (Ø 680 mm), table load max 300 kg; travels X 2 mm, Y 620 mm, Z 520 mm, swivel A +15 / -95°. Main specs: spindle nose SK40, speed 50–12 rpm, torque 121 Nm; feed 0–45 mm/min, rapid 45 m/min, max feed force 7 N; supply 3x400 V 50 Hz, total power 25 kVA; machine weight ≈11 kg, dimensions 5,400 x 4,300 x 3 mm; tool change 3 s, tool Ø max 80 mm, length 330 mm, weight 8 kg. Equipment: 56-place tool magazine, 1,250 l coolant, 80 bar high-pressure coolant, Renishaw probe, chip conveyor, oil-mist extractor, switch-cabinet AC, full enclosure. Delivers tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine-building. Hfedpfex S Nwvsx Aalod

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table load: 1,500 kg, rotary table diameter: 700 mm, rotational speed (max.): 800 rpm, overall weight: 12,000 kg, spindle speed (max.): 17,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MILLING/TURNING CENTER, HSK 63T, Heidenhain, 90 tools Swivel Milling Head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 17,000 rpm - 154 Nm torque - Drive power 29 kW - Separate spindle cooling for consistent temperature - Tool holder HSK-T63 with air blast function Integrated Rotary Table: - With torque motor and hydraulic clamping - Speed 800 rpm - Diameter 700 mm - Extended clamping surface 1,600 x 700 mm General Features: - Heidenhain glass scales on all 5 axes - 90-position tool changer with double-arm gripper - Coolant and compressed air pistol - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting - Ergonomic control console Hfedpfx Aaoylnq Tjled

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, rotational speed (max.): 7,000 rpm, coolant supply: 40 bar, Universal Machining Center Machine type: Reiden BFR-23 Control: Heidenhain iTNC 530 Year of manufacture: 2006 TECHNICAL DATA: Hsdpfjx U Rzzsx Aalofd Travel paths: X-axis: 3,000 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: +-180° Rapid traverse (X/Y/Z): 20 m/min Swivel Head A-axis: +/- 270° Speed range: 20 - 7,000 rpm Gear stages: 2 Drive power: 45/30 kW Torque: 1,133 Nm Tool holder: SK 50 Big Plus Tool positions: 64 Tool length: 600 mm Tool diameter: 250 mm Tool weight: 20 kg Table size: 2,800 x 1,000 mm Max. table load: 6,000 kg Connected load: 80 kVA Machine weight: 29 t Space requirement (LxWxH): 6,380 x 5,135 x 3,250 mm Features: Chip conveyor Coolant system

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Hfsdpfjxa Eudex Aaljd Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, Hfedpeyctf Defx Aalod ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours,

Condition: used, Year of construction: 2004, Technical details: Hsdpfow Dud Sjx Aalofd x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Tool measuring device Hodjd Rz Uvopfx Aalefd Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2002, Travel paths X/Y/Z: 2350(2x710)/520/520 mm Maximum spindle speed: 12,000 rpm Tool holder: HSK A 63 Tool changer positions: 2 x 32 Hjdpfx Asyg Dz Roaljfd CNC control: Heidenhain

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11576, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, nominal power (apparent): 40 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 22,000 kg, number of slots in tool magazine: 12, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, Eima Gamma Linear model milling machine Spindle mount HSK 63 F Hfsdsx Uz H Iopfx Aaljd

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,850 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 20,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 20,000 mm, Droop & Rein Modimill built in 2001 Fidia C20 Hfedpfxsvk Ubxe Aaled

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min Hsdpfsu Idm Nex Aalofd rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! Hfsdpfxewlqpyj Aalsd PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm Hfedpfox H Tt Djx Aaljd distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Pallet Changer 2 pos. - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm Hfjdpfeydflrsx Aalod wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling