Used beverage production for sale (1,137)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection Dcodszzz Ivspfx Aqvep - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump Dcodpozzz Najfx Aqvsp - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Dcjdpfx Aszlqu Teqvjp Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production Dodezh Ifujpfx Aqvocp - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings Djdjz Eivyopfx Aqvocp - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Djdpfjz Dimpsx Aqvocp - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2013, machine/vehicle number: LC695, Used AMOS filling line for natural juice 2500 Kg/hTechnical Specifications & Performance DataThis used bottling line is a complete processing and filling system for 100% natural juice production in Bag-in-Box packaging. Manufactured by AMOS in 2013, the line is designed to receive apples, prepare and press the fruit, filter and collect the juice, pasteurize the product and fill it into 3L and 5L Bag-in-Box bags.Manufacturer: AMOSYear: 2013Processing capacity: 2,500 kg of apples/hFilling output: 1,000-1,200 bags per 8 hours of operationPackaging formats: 3.0L and 5.0L Bag-in-Box bagsJuice storage: 2 tanks x 500LElectrical supply: 380V, 3-phaseAdvanced Automation & Control SystemsThe equipment is connected to the utility network and operates with electricity, water, compressed air and diesel for the pasteurization stage. The compressor supplies air to the press, pasteurizer and filler, supporting coordinated operation of the processing and filling stages. The line combines fruit handling, extraction, thermal treatment and Bag-in-Box filling in one integrated industrial packaging solution.Production Line Integration CapabilitiesThis complete juice processing line follows a logical production flow from raw fruit intake through filling and natural cooling of packed juice. It is suitable for producers seeking second hand equipment for natural juice processing, including apple and tangerine juice applications.Machine type/categoryManufacturer/modelYearCompressorGIS2013Various EquipmentVoranVarious EquipmentVarious EquipmentAMOS2013Various EquipmentFilterTankPasteurizerRinkTankFilling MachineOettel2013Various Equipment Dcodpfx Aqo Adtp Iovjp

Condition: used, Year of construction: 2001, machine/vehicle number: LC627, Used AVE OCEANIC-V filling line 12-12-1 2500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete AVE engineering solution designed for glass bottle oil filling and packaging. It delivers reliable performance for industrial packaging and beverage production environments seeking a second hand system with proven components.Production speed: up to 2,500 bottles/hour with 0.5L formatCompatible bottle formats: 0.25L, 0.5L, 0.75L square; 0.5L, 1.0L roundContainer types: Glass bottlesChange parts: Starwheels for 5 formats includedClosures: Aluminum screw caps 31.5mm and 35mm; heat-shrink capsules 31.5mm and 35mmPrimary models: AVE OCEANIC-V 12/12/1 filling monoblock; AVE 4T automatic rotary self-adhesive labeller (two stations)Monoblock key data (rinser/filler/capper): water consumption ≈ 200 L/h; air consumption 80 L/min; installed power 5 kW; absorbed current 13 A; weight 3500 kg; bottle running level 1100±50 mm; footprint approx. 3500 mm (L) × 1392 mm (W) × 2550 mm (H)Labeler key data (model 4T): air consumption 35 L/min; installed power 2 kW; weight 1000 kg; bottle running level 1100±50 mm; overall length 3000 mm; overall height 2000 mmAdvanced Automation & Control SystemsThe line integrates AVE control and electrical boards for centralized management of rinsing, filling, capping, capsuling, and labeling. Machine guarding with safety interlocks supports safe operation, while clearly marked utility connections simplify setup. Quick-change starwheels and guided adjustments support format changes across square and round bottles, reducing downtime and improving overall equipment effectiveness.Production Line Integration CapabilitiesThis complete bottling line is configured for inline operation with a monoblock rinsing-filling-capping system, a heat-shrink capsule applicator, and a rotary self-adhesive labeling machine with two stations for body and back labels. It is ideal for edible oil production on glass bottles in multiple formats and shapes. The standardized bottle running level (1100±50 mm) across modules simplifies conveyor alignment and integration with upstream and downstream handling equipment.Machine Condition & Maintenance HistoryThe line is presented as second hand industrial packaging equipment in good working condition and ready for operation. It has been configured and used for oil, with format parts included for five bottle formats. Components show consistent technical coherence across the system, characteristic of AVE manufacturing and design.Operational Performance & VersatilityEngineered for oil filling applications on glass containers, the monoblock ensures stable handling for both square and round bottles. The aluminum screw capping system handles 31.5mm and 35mm closures for a wide range of edible oil formats. The dedicated heat-shrink capsuling unit accommodates matching 31.5mm and 35mm capsules for a premium finish. The rotary self-adhesive labeler with two stations applies front and back labels with precision, supporting brand presentation and regulatory requirements.Installation Requirements... Dcjdpfj Adty Tsx Aqvop

Condition: used, Year of construction: 2021, machine/vehicle number: LC604, Used Brewery for beer processing machine 5HLTechnical Specifications & Performance DataThis second hand 5 HL brewery brewhouse on skid is a compact, industrial-grade system engineered for small to medium-scale beverage production. Manufactured by BEOINOX, it integrates key process vessels and utilities for efficient wort production and fermentation management. The system is suitable for craft beer brewing and can be integrated with downstream packaging or a used bottling line.Batch capacity: 5 HL per brewBrewhouse vessels: Mash Tun 500 L, Lauter Tun 1000 L, Whirlpool 800 LUtility tanks: HLT 800 L, CLT 800 L, UnderbackFermentation: 2 × 1350 L fermentation vessels (FVs)CIP: Mobile CIP unit with 2 × 150 L tanksHeat exchanger: Two-stage plate heat exchanger (PHE)Pumps & pipeline: Process pumps and sanitary piping includedAeration: Aeration set includedControl: Integrated control systemModel/Code: .300.21-00Overall dimensions (approx.): Length 4503 mm, Width 2598 mm, Height 2200 mmAdvanced Automation & Control SystemsThe brewhouse is supplied with an integrated control system to manage key brewing steps such as mashing, lautering, wort transfer, and cooling. The two-stage PHE enables precise temperature control for wort chilling and process optimization. Pumping and pipeline circuits are designed for smooth transfers, while the aeration set supports consistent yeast pitching and fermentation starts. Safety interlocks and operator controls contribute to reliable daily operation within industrial brewing environments.Production Line Integration CapabilitiesThis skid-mounted brewhouse can operate as a standalone brewing unit or be integrated into a broader beverage production line. It interfaces seamlessly with fermentation, conditioning, and downstream packaging processes. The sanitary pipeline layout enables efficient transfer to FVs and onward to filtration or packaging. With its compact footprint, it can be paired with a used bottling line or kegging system to complete an end-to-end craft beer production setup.Machine Condition & Maintenance HistoryThe system is offered as a second hand unit in operational condition and ready for operation. Its sanitary, skid-mounted design simplifies cleaning and upkeep, while the included mobile CIP unit supports routine maintenance procedures for vessels, pipelines, and heat exchanger circuits.Operational Performance & VersatilityDesigned for beer production, the 5 HL brewhouse accommodates standard craft workflows including infusion mashing, lautering, wort boiling/whirlpooling, and rapid chilling. The two 1350 L fermentation vessels provide capacity for staggered batches and flexible production scheduling. The aeration set enhances yeast management and consistent fermentations, while the CIP system ensures hygienic operation and product quality.Installation Requirements & Site PreparationThe compact skid layout reduces installation complexity. Allow sufficient space for the indicated footpr... Dodps Adt N Iofx Aqvecp

Condition: used, machine/vehicle number: LC547, Used Bottling Line for still wine 2000 bph The Used Bottling Line for still wine 2000 bph processes still wine in glass bottles and handles formats of 0.375 L, 0.75 L, and 1.5 L. The line delivers a performance of 2000 bottles per hour and operates entirely in a clockwise direction. Each machine is designed to ensure precision, compatibility, and reliability when handling still wine in glass containers. Moreover, the configuration supports a continuous and linear bottling process with minimal manual intervention. Microfiltration and feeding unit The process begins with a mono screw pump equipped with a microfiltration system, manufactured in 1999. This pump directly feeds the filler and maintains consistent product flow. Specifically, the filtration unit includes three housings, each containing three filter cartridges, in addition to all required connectors. As a result, this module guarantees the microbiological safety of the wine before it enters the filling phase. Dcedpfxe Adyyaj Aqvep Rinsing machine SBR 1R. 4. 12. 132 Next, the line passes through an SBR rinsing machine, model 1R. 4. 12. 132, also built in 1999. It features 12 grippers with fixed nozzles, and performs bottle rinsing using recirculated water. In particular, this unit supports Champagnotta (90 mm diameter), Borgognotta (80 mm diamater), and Bordolese (72 mm diameter) bottle diameters. Therefore, it ensures that every bottle reaches the filling station free of particulate and microbiological residue. Gravity filler Bertolaso Olimpia 12 After rinsing, the bottles move to a Bertolaso Olimpia 12 filler, a gravity-based unit with 12 filling nozzles built in 1999. This machine operates with slight vacuum assistance, ensuring gentle product handling. Notably, it accommodates multiple formats, including half bottle (63 mm diameter), Bordolese, Borgognotta, Champagnotta, and Magnum (110.5 mm diameter). Consequently, the machine offers flexibility in batch production. In short, the filler guarantees accurate volume control and clean filling cycles tailored for still wine. Capping units for crown and straight corks in the Used Bottling Line for still wine The Used Bottling Line for still wine 2000 bph features two separate capping modules. First, the Bertolaso Alfa 110 applies 29 mm crown caps using a single-head system. Operators can adjust the height manually, and the machine works without vacuum pre-treatment. For example, it seals Champagnotta and Magnum spumante bottles efficiently. Second, the Bertolaso S. Gloria 500 R/S handles 24 mm straight corks with gas injection and one capping head. Unlike the first unit, it does not use vacuum. Furthermore, it handles formats from 63 mm to 110.5 mm diameter, maintaining high sealing reliability. Altogether, these two capping stations allow the line to manage various closure types for still wine applications. Bottle washer and drying system in the Used Bottling Line for still wine

Condition: used, Year of construction: 2005, BMS filling and emptying machine, 2 heads for 0.5l NRW bottles Dcedpfx Ae Adrcteqvep 0.5l Euro bottles 0.7l Brunnen bottles 0.33l bottles

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO Dcjdpez E U Dijfx Aqvsp - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, control voltage: 24 V, input current: 16 A, input frequency: 50 Hz, TROXLER TV 2000 SCREW CAPPING MACHINE We offer this TROXLER TV 2000 screw capping machine, equipped with a KTM capsule dispenser. This unit is designed for packaging professionals who require capping equipment with a capsule dispensing system. The unit has been fully refurbished and comes with a 6-month warranty. Specifications: Dedpfxez Sn T Sj Aqvocp • Brand: TROXLER • Model: TV 2000 • Type: Screw capping machine • Additional equipment: KTM capsule dispenser, for 28*18 capsules, output approximately 2000 bottles/hour • Condition: Fully refurbished For further information on compatible capsules, settings, technical specifications, or to arrange a visit, please contact us. A refurbished and guaranteed used capping unit, offered to packaging professionals.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 2,000 mm, total width: 1,000 mm, total length: 1,300 mm, type of input current: three-phase, overall weight: 600 kg, input voltage: 380 V, year of last overhaul: 2026, control voltage: 24 V, warranty duration: 6 months, input current: 16 A, input frequency: 50 Hz, POGGIO SE9 9-NOZZLE RINSING MACHINE Packaging equipment – Fully refurbished – 6-month warranty We offer this POGGIO SE9 rinsing machine, equipped with 9 nozzles, designed for packaging professionals seeking rinsing equipment to integrate into their production line (conveyors provided without motorization). Fully refurbished, it comes with a 6-month warranty. Specifications: • Brand: POGGIO Dsdpfxoz Spb Te Aqvjcp • Model: SE9 • Type: Rinsing machine • Equipment: 9 nozzles • Format: 25cl / 50cl / other formats available upon request • Condition: Fully refurbished • Warranty: 6 months For any technical inquiries, clarification on compatible formats, or to arrange a visit, please contact us. Refurbished and guaranteed used equipment for packaging professionals.

Condition: excellent (used), Year of construction: 1996, The machine was located at a school and was never put into production. It is also suitable for being disassembled for parts. Djdpfx Ao Afb D Asqvocp

Condition: excellent (used), functionality: fully functional, Alfa Laval centrifuge used as a whey degreaser Dcedpfoxb D Tbox Aqvep Centrifuge Brand: Alfa Laval Machine number: 31829-02912 Dimensions: 1700 mm x 1850 mm x 1830 mm

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications Dcsdpfx Aqjxqmp Rovep This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: used, Year of construction: 2021, Overview Dcodpfx Aqezh Il Ijvsp This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  - Capacity: 1,200 kg/hour - Application: Fruit juice - Configuration: Belt press - Operating hours: 200

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar Djdpfxoziuazo Aqvjcp - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: used, Year of construction: 2026, Overview Dsdpfxozkkp Io Aqvjcp This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: used, Year of construction: 2006, Overview Dcsdpfx Aezk I N Seqvep This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. Dedpfszk U E Tex Aqvocp A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data Djdezhaadjpfx Aqvocp - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Dcsdpfx Aezpaiujqvjp Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment - Filter star with filter candles in each tank (candles with light damage) - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2016, Overview This belt press was manufactured in 2016 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. The SRAML TP50 belt press is delivered together with the SRAML JF1500 mechanized self-cleaning filter, which removes impurities such as seeds and stems. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 700 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Scope of Delivery - Belt Press | SRAML | TP50 | 700 kg/h | 2016 Djdpfozpffhex Aqvocp - Self-Cleaning Filter | SRAML | JF1500 | Removal of seeds and stems | 2016 - Spare parts | Belts, rollers, bearings, self-cleaning filters with pump, gearbox, 0.75 kW motor and further wear parts