Sraml TP50 + JF1500 700kg/h Belt Press (2016)

Sraml Bandpresse

Condition: new, Year of construction: 2026, Disc cutter for the efficient shredding of rejected rolls. Features: -Automatic safety locking system -Blade guard -Emergency stop pull cord -Siemens PLC Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7.5kW Cutting force: 30 tons Hfjdpfx Asn Hyxlocgel Machine in stock, immediately available. Price and further information upon request. We will gladly provide you with a non-binding offer.

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Hfjdpfx Ajv Sq S Njcgel Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 850 mm - Machine weight: approx. 3500 kg - Tank capacity: approx. 110 liters - Hand protection grid in the area of the control panel and on the opposite side - Knife locking mechanism Hfedpogl Adzjfx Acgsl - Straight splitting table design - Documentation: 2 copies in German (1 printed, 1 on CD) - Color: RAL 5012 - light blue - Protective grid/knife beam: RAL 1028 - melon yellow Machine in stock and immediately available Price and further information upon request.

Condition: new, - Motor power: 9 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons Hsdpfjgl Ac Sox Acgefl - Splitting table: straight design - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Hfjdpfxen Argij Acgol Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: ready for operation (used), The crown caps are manually fed into the dispensing chute, the machine places the crown cap onto the bottle, and presses it into place. Hedpsfh Dlrofx Acgofl

Condition: used, Year of construction: 1995, machine/vehicle number: 102085, Vakuumpumpe / Vaccum Pump Rietschle VFT 140 (11)Baujahr / Year 1995 - Serial-No. 102085-1113 Enddruck / Pressure 100mbar Saugvermögen / Vaccum capacity 50HZ=140/60HZ=168 m3/h Capacity 1450 / 170 min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hedpfoh Eg Tqex Acgefl

Condition: good (used), Year of construction: 1980, Diesel emergency generator Manufacturer: MWM Mercedes - AEG, Year: 1980, with switchgear cabinet and cooler. Diesel engine: MWM, 8 cylinders, 405 hp Hedpfjt In Nyjx Acgofl Operating hours: 303.7 hours Generator: AEG, Type: SIRI 100 D/4, 330 kVA.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2000, power: 315 kW (428.28 HP), overall weight: 3,000 kg, input voltage: 400 V, type of input current: three-phase, machine/vehicle number: Expander Typ OEE 23,2 315KW, Used expander/extruder, versatile, can be used with both hydraulic counterpressure slide and dies (shaping e.g. for animal feed) Machine was purchased, unfortunately cannot be used because our power connection is not sufficient. Available: expander extruder with gear and drive, hydraulic slide (cone not plate), rotary knife and various dies, hydraulic unit with oil cooler. If required, the associated belt dryer is also available. Hfsdsvlwchopfx Acgjl Please send inquiries by email, thank you.

Condition: like new (used), Juice Mixing and Preparation Line with Homogenizer – Stainless Steel Industrial line for mixing, preparation, and homogenization of juices, designed for the production and conditioning of juices, nectars, fruit beverages, and other liquid or semi-liquid products. The installation consists of several stainless-steel process tanks, mixing systems, sanitary piping, pumps, instrumentation, and a homogenizer, allowing for various product preparation operations to be carried out within a single unit. Homogenization reduces and more uniformly distributes the particles present in the product, helping to improve its stability, texture, and consistency, and reducing the tendency for phase separation, depending on the formulation. MAIN FEATURES -Type: Juice mixing and preparation line -Application: Juices, nectars, and beverages -Several stainless-steel process tanks -Tanks with mixing systems -Integrated homogenizer -Product mixing and homogenization -Circulation and transfer system -Sanitary pumps -Process piping and valves -Pressure and temperature instrumentation Hodox S E E Aepfx Acgofl -Batch preparation and formulation -Possibility of product recirculation -Construction primarily in stainless steel -Hygienic design for the food industry -Unit mounted on a common frame -Integrable with thermal treatment and filling systems PROCESS The different ingredients or base products are introduced into the preparation tanks, where mixing, dissolution, ingredient incorporation, and conditioning operations can be carried out. Subsequently, the product can circulate through the homogenizer, where it is subjected to a mechanical treatment designed to reduce and uniformize the size of the particles or dispersed phases. Depending on the formulation and installed configuration, the system can be used for: -Preparation and mixing of juices -Production of nectars -Mixing of different concentrates or pulps -Ingredient incorporation -Homogenization -Suspension stabilization -Reduction of phase separation -Pre-treatment before thermal processing -Feeding filling lines APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, liquid purees, and other food beverages that require a versatile installation for preparation and homogenization. It can be used with products containing pulp or suspended particles, subject to the characteristics of the product and the configuration of the homogenizer and other installed equipment. The line can subsequently be integrated with pasteurizers, sterilizers, heat exchangers, aseptic tanks, and filling systems. Machine available for inspection. Additional technical information, capacities, dimensions, additional photographs, or videos can be provided upon request.