Used beverage production for sale (1,137)

Condition: used, Year of construction: 2016, Parker AKM 60 Dsdpfx Ae Ahliqoqvecp

Condition: used, Machine: Reihenfüller Primus Djdpfx Aqo Ahlmxjvscp

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and cooling duties within the pasteurization process. Its dual-circuit pressure and temperature ratings support controlled operation in a process envi... Dcsdpfx Aez Ecmxeqvjp

Condition: used, Machine: Primus Vaculi 6 valve row filler Djdpfe Ahla Nsx Aqvjcp

Condition: used, Year of construction: 2018, operating hours: 8,000 h, machine/vehicle number: LC641, Used GEA Procomac Aseptic filling line 48000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-performance aseptic PET solution engineered by GEA Procomac for industrial packaging and beverage production. Designed for second hand acquisition without sacrificing technical integrity, the line delivers a rated capacity of 48,000 BPH with dry aseptic technology and integrated fruit-piece dosing capability.Rated capacity: 48,000 BPHAseptic method: Dry asepticContainer format: 0.23L (two different molds)Bottle neck & cap: 38mm neck, double-layer 38mm capBlower: SIPA, 24 cavitiesFiller: GEA Procomac Fillstar FX isobaric filler, 84 valvesFruit-piece dosing: 24 valvesCapper: 24 nozzlesGas unit: None (suitable for low-acid and neutral products)Operating hours: 8000Year of manufacture: 2018Downstream speeds: Dual 24,000 BPH modules on key packaging operationsKey models/codes: Fillstar FX; outer-cap machine model NYG18H-00Advanced Automation & Control SystemsThe line integrates advanced aseptic handling and in-line quality control. Preform sterilization, cap feeding and sterilization, and H2O2 injection are automated to maintain hygienic integrity. Optical and X-ray inspection systems monitor critical control points with reject mechanisms for non-conforming containers. A dedicated aseptic water and CIP unit supports repeatable sanitation cycles and short changeover times. Automated components are engineered for consistent performance in high-speed production environments.Production Line Integration CapabilitiesConfigured as a complete production line for PET bottles, the system combines container handling, filling, labeling, secondary packaging, and palletizing. It includes a 24-cavity SIPA blower, GEA Procomac isobaric filler, fruit-piece dosing, sleeve and neck labeling, shrink wrapping, carton packing with industrial robots, accumulation buffering, and palletizing. Format flexibility includes 0.23L with two mold sets and 38mm neck finish. The modular layout supports synchronization across conveyors and buffering for continuous operation.Machine Condition & Maintenance HistoryThe line is still on power and reported in very good condition. Operating hours are approximately 8000. Manuals are available to support installation, operation, and maintenance. The equipment set is recent (predominantly 2018), with select processing assets from 2007 and 2019 included, indicating a professionally maintained and upgraded system.Operational Performance & VersatilityOptimized for low-acid and neutral product aseptic bottling, the configuration is suitable for premium beverage production requiring sterile conditions and gentle handling—especially products containing fruit pieces. Processing assets include tubular pasteurizers, UHT capability, homogenization, deaeration, and aseptic tanks, supporting robust beverage preparation workflows. Dual 24,000 BPH downstream modules help ba... Dodpfo Ady Dxox Aqvocp

Condition: used, machine/vehicle number: PMAM010000, Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars Dcsdpo Ahk Rrjfx Aqvop consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

Condition: used, Liter per hour: 30000 Djdpfx Aqe Ahk Hyovecp pump type: Centrifugal pump electrical power supply kW: 15

Condition: used, Machine: Bortolin MA 88 lAP Devider MA 88 lAP Dcedpfx Aqe Ahlccjvsp

Condition: used, Beco 400x400 KD 10 Aus Betriebsauflösung. Originalverpackt auf Palette Beco 400x400 KDS 12 Beco 400x400 Steril S Beco 600x600 KD 10 Dcjdpfx Aqj Ahk Ihovjp Beco 600x600 KDS 12 Beco 600x600 Steril S Genaue Anzahl siehe Excel Liste.

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l Dcjdpfx As Ahzarjqvop - Handle material: pre-spooled handle tape rolls - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Dsdpj Adtqlsfx Aqvecp

Condition: used, Year of construction: 2009, Capacity: 10.000 bph Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel Djdpfxo Ahltae Aqvjcp

Condition: used, Year of construction: 2009, machine/vehicle number: 09-0116, Cardboard labeling HERMA DS Dcodps Ahk U Sefx Aqvsp

Condition: used, machine/vehicle number: 329601, Machine: Bortolin Kemo Mara H-M Carton sealer MARA H-M Dcsdpfxs Ahk Sws Aqvop

Condition: used, filtration surface (sqm): 12 Dodpfj Ahlm Hex Aqvecp discharge of vessel: automatic discharge operating pressure (bar): 9 electrical power supply kW: 5 weight [kg.]: 1500 volume of vessel (ltr): 880

Condition: used, bottom outlet NW 50 Dsdpfxo Ahlh Nj Aqvocp pressure gauge with outlet Optional: various fittings

Condition: used, with manual cork magazin Dedpj Ahk Hvjfx Aqvocp capacity / hour ca.: 1800 amount of capping heads: 1 Cork: sparkling wine cork Drive: motor drive electrical control: simple elctric, no PLC

Condition: used, Year of construction: 2010, machine/vehicle number: 2010-1042, Vollkastenkontrollanlage SYSCONA Dedpfxj Ahld Ne Aqvscp Unicept 4 VKK capacity / hour ca.: 4000

Condition: used, Year of construction: 2009, The *Alfa Laval M10-MBASE* is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. *Technical Specifications* *Type:* M10-MBASE *Heat transfer area:* 2.6 m² *Plate material:* Stainless steel Alloy 316, thickness 0.50 mm *Gasket material:* NBRFF Clip-On (Nitrile rubber) Dcedpfx Aj Ahlr Djqvjp *Plate pack thickness:* 63 mm *Total weight:* 232 kg *Total volume:* 13 liters *Dimensions:* Height 672 mm, width 618 mm, depth 530 mm *Connection standard:* DIN NW100 *Bolts:* M20 *Expandable:* up to 17 additional plates *Operating Data* *Design pressure:* 10 bar *Test pressure:* 14.3 bar *Design temperature:* up to 120 °C *Minimum temperature:* 0 °C *Typical flow examples (according to datasheet):* Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) *Design Features* *Plates with parallel flow channels* ensure high efficiency and low pressure drop. *Clip-on gaskets* for easy maintenance and cleaning. *Robust frame and pressure plate construction* with M20 tightening bolts (length 360 mm). *Flexible capacity expansion*, up to 17 additional plates can be installed. *User-friendly assembly* with clear A/B plate markings. *Typical Applications* Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: used, machine/vehicle number: 13510, Machine: SAUTELMA ROTOLOK MINISMART Scales SAUTELMA Dcjdpfxe Ahlcgj Aqvop

Condition: used, machine/vehicle number: TP 24.002, 24 filling valves suitable for low vacuum filling Dodpfx Aj Ahk R Djqvocp Capacity: up to 8400 bottles/hour Central filling height adjustment Perfect for wine, juice, spirits

Condition: used, Year of construction: 2015, Pursuit of high-speed and optimal print quality Brighter and clearer touch screen Improved ink circulation block AUTO power OFF function Dcodpfo Ahlf Uox Aqvsp User friendly operation

Condition: used, Ausziehlänge: 1,5 - 4,5 m Dsdpfxe Ahlf Hs Aqvscp

Condition: used, Machine: Tank Rührgerät mit Propeller ca 1,00 Mtr , Farbe grün Dodpfx Aqs Ahlp Njvjcp

Condition: used, Machine: SARTORIUS 345034-E Modulfilter 3 x 4 x 16" Jumbo Dsdpfe Ahlncsx Aqvocp