Used Woodworking for sale (12,532)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors Csdpfxexzfwbe Abbjaa - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Simultaneous push off and infeed Table Length: 3100mm Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Energy Saving Mode Cjdpfx Ajx Ap Aksbbeaa

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, 2 x Biesse Akron 1440 Edge Banders Cajdpfxex A E Ipj Abbea Edgebanders are 2017 + 2018 Extra Glue Pot available for each Homag Returns included in sale Machines are in production and ready for use Price is per machine

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 100007528, total length: 9,000 mm, total width: 3,000 mm, total height: 1,700 mm, type of input current: three-phase, power: 13 kW (17.68 HP), Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Caodpoxmi E Hofx Abbea Delivery can be arrange in the Republic of Ireland

Condition: excellent (used), Year of construction: 2019, operating hours: 600 h, functionality: fully functional, type of input current: AC, volume flow: 5,950 m³/h, negative pressure: 30,590 Pa, intake manifold diameter: 315 mm, overall weight: 325 kg, total length: 3,440 mm, total height: 2,950 mm, input voltage: 415 V, nominal power: 7.5 kW (10.20 HP), input frequency: 50 Hz, inlet: 315 mm, MK 4 MTFA from Inventair with autoskaker function Date of Manufacture: 2019 Csdsxzgpxopfx Abbeaa Condition: Fully functional and clean Usage: Only used on an edgebander to remove waste from MFC. No MDF use so fitler bags are clean. Extras: Two boxes of bags and new bag seals Shipping: Can be delivered on a skid of four pallets Terms: Ex works Video: Video of the machine on request Pricing: This item is priced for a quick sale.

Condition: good (used), Infotec 1008 Rotary CNC machine adjustable RPM, manual or auto, 3Ph Cajdpfsx Ai T Nox Abbja

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 32664, feed length X-axis: 5,000 mm, working width: 250 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 250 mm, working height: 50 mm, overall weight: 1,500 kg, power of feed motor: 2 W, spindle speed (max.): 6,000 rpm, height adjustment type: electric, Made for Weinig. Friulmac Randomat-E End Matching machine for variable lengths. minimum 500m/m. Serial No: 32664, Year 2001 In Top Condition. 5m. Infeed Table, 5 M. Outfeed Table Cjdpfx Asx A D Ibjbbeaa Full Sound & Safety Enclosure with 1 Access Door each end and Left & Right .Sliding Doors on the Front. Siemens Siematic PO7 Controls. Photos available on WhatsApp

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Casdpovbdyxofx Abbja Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg

Condition: ready for operation (used), Year of construction: 2007, Selco EB70L Beam Saw Cutting length 4300 mm Cajdpex A Eyrjfx Abbea Cutting width 4400 mm Max. saw blade protection 70 mm Saw blade diameter 300 mm

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Cjdpfx Ajxwux Tjbboaa Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: used, Year of construction: 2015, A very high quality German designed and built spindle moulder from leading manufacturer Martin. The machine although compact in design has a number of premium features as standard including the heavy composite frame to ensure maximum stability along with the 5.7" TFT colour touch screen control unit. This is positioned economically at eye level and helps reduce set up times markedly. From this unit the operator can easily set the required height of the spindLE. In addition the tool data memory gives the facility to store up to 500 different tools, automatically recalling the spindle height position, speed and other program data for the particular tool selected. Other standard features include a precision fence assembly, with hand wheel adjustment and digital display in the control unit, electronic soft braking device for the spindle motor and 'Dornfix' quick shaft change system Codpfx Abjxx Upnsbsaa Specification - Heavy duty basement for maximum stability and precise machining. - Precision ground cast iron table. - Overhead user friendly graphic colour touch screen control unit. - Heavy duty fence assembly with precision movement - movement by hand wheel - 1 off 11/4" dia spindle shaft (140mm working length) - SK40 'Dornfix' quick change system. - 7.5hp motor - 3000,4500,6000,8000 and 10,000 spindle rpm. - Centralised lubrication. Complete with following options: - Table extensions to both sides giving overall length of 2200mm with extendable workpiece support bar 3000mm overall length. - Integral fence plates - Digital display of fence plate right on control screen with adjustment by handwheel (instead of just normal scale rule). - Cast iron console for feed support - Comfort feed support arm with quick rise / fall by handwheel with mechanical display of height position. Heavy duty cast iron brackets and large steel clamping levers to ensure feed unit is securely locked in required position. - Feed unit variomatic 3 roller with variable mechanical feed speeds of 3 to 17m/min. On / off buttons for the feed unit integrated in to the control panel. - Centrex cutter guard in Lieu of standard CPS guard.

Condition: used, Used O'Hara Technologies model Labcoat IIX 316 stainless steel coating pan system. Unit has (1) 762mm diameter perforated drum, (1) 482mm diameter drum & (1) 381mm diameter drum. Approx batch sizes range from 1kg to 40kgs. Unit has local controls. Unit includes Servolift units for drum handling. Csdpfx Aexvqhzjbbjaa

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Csdpfxox A Tc Is Abboaa Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of tool changer positions: 32

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Casdpfewnr A Hex Abbja Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Year of construction: 2009, Price: On request What are Presale Items at Second Owner? Caedpjx Dil Iefx Abboa Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Details: - └ Description: Excluding tools - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: 113253 - Number of milling spindles [pcs.]: 1 - Material clamp system: Pneumatic - Drilling unit present: Yes - System/software: - Safety feature: Door interlock switches, Enclosed fence - CNC options: Unloading system, Loading system - CNC documentation available: USB stick - Voltage [V]: 400 - Current consumption [A]: 63 - Fuse [A]: 80 - Power [kW]: 32.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, Cursal TRSI 8000 AP Automatic Crosscut Saw With Integrated Pusher - 2018 CE Durable and versatile automatic crosscut saw with exceptional speed and accuracy. Impressive speed and accuracy Casdpfxexxvqto Abbsa CNC programmable sequential cutting capabilities Optional loading and unloading Specification : 6000 mm In feed capacity, push feed crosscut Saw Single-block structure: the frame made of welded - worked steel Pneumatic side-aligner installed before of the blade Pneumatic blade-press with mobile casing: stroke 150 mm. Breaking press-wheels with horizontal axis installed after blade Cutting height on the guide: 120 mm. Width of the boards: min. 40 - max. 250 (300) mm Automatic cutting control managed by the computer Vertical alternated blade movement: pneumatic system with totally controlled stroke Saw blade HM steel with alternate teeth Ø 500 mm, hole Ø 35 mm - Z=120 Blade motor HP 7,5 with automatic brake Cutting time: adjustable from 0.3 to 2 seconds CNC unloading belt with 2 programmable ejectors 2018 CE

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm No of Grippers: 11 Caedoxaudzjpfx Abbsa

Condition: used, Year of construction: 2002, total width: 1,200 mm, total length: 1,100 mm, total height: 1,550 mm, Price: On request - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: Avl150 - Main motor power [kW]: 11 - Connection diameter [mm]: 410 - Transport dimensions: 1100mm x 1200mm x 1550mm (l x w x h) Csdpfex Diitjx Abbjaa Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Csdpfx Aeu Hldmebbjaa Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1 Caedpsw Idbysfx Abbea

Condition: used, Year of construction: 2016, total length: 4,630 mm, total height: 1,770 mm, total width: 1,600 mm, Weight: 1.200 kg Price: On request - Machine available from: 2025-12-01 - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 15507737 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Type/Brand: FG 201 - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: 1903 - └ 3rd unit type: Aandruk rollen - - Type/Brand: 1812 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: 1918 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: FR201 - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Type/Brand: 1832 - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1964 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 6 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 45 - Min. panel width [mm]: 65 - Max. panel width [mm]: 65 - Min. panel length [mm]: 160 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 10 - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 29.37 - Fuse [A]: 35 - Transport dimensions: 4630mm x 1600mm x 1774mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Csdpsx Dihpefx Abbeaa VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008277, X axis working area: 5680 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Cajdjx A Hgmspfx Abbea Number of controlled axes: 4 axes Total number of drilling spindles: 21 Total number of tool changer positions: 24

Year of construction: 2017, condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2025-12-12 - Details: - └ Description: Machine is not working, needs new Stabilizer doppel, Schienenkopf, oil pump, chain and protective cover. - Year: 2017 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 7.5 - Max. workpiece length [mm]: 7000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Caodpfx Aex Dig Sobbsa Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total length: 3,200 mm, total width: 2,000 mm, total height: 1,400 mm, Weight: 800 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 140 - Roller table length [mm]: 3000 - Table width [mm]: 1200 - Arbor saw blade diameter [mm]: 300 - Dust extraction nozzle diameter [mm]: 110 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - Voltage [V]: 400 - Power [kW]: 5.5 Codpfxox Dig Es Abbjaa - Transport dimensions: 3200mm x 2000mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Weight: 1.600 kg Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Caodpfx Asx Dh Arjbboa Yorick Diebels