Used Planer Thicknesser for sale (1,567)

Condition: excellent (used), Planer-thicknesser KNAPP AD 410 Profi T - used - WIGO cutter block, ground cast iron tables, joint opening tables opening simultaneously, Redpfx Asymn Eyea Ujp table opening to the rear, infinite feed speed adjustment ----- Technical data ----- Planing width: 410 mm, table length: 1,700 mm, number of knives: 3, tilting range of fence: 45°, clearance height: 230 mm, feed speed: 6-12 m/min, extraction port: 120 mm, motor power: 4 kW, weight: 460 kg Quality info: - Joint tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked/adjusted - Complete basic inspection - Complete cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs Rjdpfx Aajycihbo Usp - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) Rsdpeyarbfjfx Aa Uep (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Rjdpfx Aajx Sx S Ne Uep Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential Rodpfsymfazjx Aa Usp - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm The infeed table is adjusted via a parallelogram mechanism Both jointer tables feature noise-reducing table lips Precision bearing cutterhead with reversible knives Thicknessing table with centrally guided column and support Adjustable spirally serrated feed roller for optimum planing results Technical data: Jointer width: 410 mm Table length: 1800 mm Table height: 850 mm Cutterhead speed: 4500 rpm 4-knife cutterhead Cutterhead diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. cutting depth: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Workpiece clearance min./max.: 3 - 225 mm Max. cutting depth: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space required: 1800 x 850 mm Availability: short notice Rjdpowzzyuofx Aa Uop Location: Röllbach

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers Redpfxsx Sqz Ae Aa Uep - geared feed roller - planing cutterblock - smooth outfeed roller - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Rjdpfxsx R Dume Aa Usp Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW Rodpfjyg Iwcox Aa Uep - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min Rodpfx Aeyg Inuea Uop - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rodpfjih Dxdox Aa Usp Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Redpfx Aajff Hdmo Uep Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Year of construction: 2022, condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm diameter planer shaft: 70 mm Tersa knife shaft rpm: 5500 dimensions planing fence: 1300 x 150 mm inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Rsdedkl Sqepfx Aa Usp Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Machine is in our showroom and immediately available.

Condition: good (used), Robland planer thicknesser 3 Tersa knives 1 thicknesser feed speed thicknesser processing height 230mm soundproofing combs in the table table length 140cm the machine is efficient and ready to work Redpfx Asvyhmgja Uop

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400x1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400x20x3 mm Max. 4 mm table adjustment Thicknesser: Rodpfog S N Agox Aa Usp Working table dimensions 400x760 mm Feed speed 7 m / min Working height 4-220 mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 380 kg The cast iron structure of the body, the exact limiter of the cross cut and the excellent quality of workmanship allow to achieve the best machining results. Machining is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm Rsdpfxocq E Uus Aa Usp max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: good (used), functionality: fully functional, planing width: 530 mm, total width: 1,000 mm, total height: 1,050 mm, overall weight: 600 kg, total length: 2,740 mm, working width: 530 mm, chip removal: 150 mm, planer shaft diameter: 120 mm, table length: 2,740 mm, Planer, thicknesser STETON PF 530 E Specification: • Condition - used • Manufacturer - STETON • Model - PF 530 E • Working width - 530 mm • Table length - 2740 mm • Adjustable fence (angle adjustable) • Motor power - 4.0 kW • Spindle speed - 5000 rpm • Chip thickness indicator • Max cutting depth - 8 mm • Electrically adjustable planing height from control panel • Noise reduction fingers at the shaft • Motor brake • 4-knife shaft, diameter 120 mm, for Tersa knife system • Start - star-delta • Outlet for chip extraction - diameter 150 mm • Weight - approx. 600 kg • Overall dimensions - 274 x 100 x 105 cm (L x W x H) Additional information: • Very good technical condition • The attached photos show the actual state of the item for sale • Possibility to switch on and test the machine on site. Rodjxtdxbjpfx Aa Usp

Condition: good (used), functionality: fully functional, Planing width 60 cm, thickness approx. 20 cm, wedge-shaped cutterhead with 2 knives, two rollers under the table, segmented feed roller and pressure beam, chip ejection. Redpfxeykmz Uj Aa Ujp

Condition: new, Year of construction: 2026, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Power supply Rsdpfsvxh Nrex Aa Usp 3 phase, 400V

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Rsdpevxh A Sofx Aa Ujp Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2026, The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds. The latest version of the machine with an innovative tabletop opening system: Redpfx Aaswu T S Ae Usp ❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. ✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. ✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Stable construction resistant to vibrations The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work. The additional rubber feet used allow work without the slightest vibrations. VERSION with the most powerful engine with a total power of S6: 2.6kW The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work. A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem. Trouble-free change of the planer to the thicknesser. Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. - Smooth height adjustment of the tops with a scale. - The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down - Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical data: Knife shaft diameter [mm] 75 Knife shaft speed [rpm] 4000 Suction nozzle diameter [mm] 100 Swing ruler tilt angle [°] 90 - 45 Number of knives 3 Shaft length [mm] 262 Knife dimensions [mm] 250x30x3 Maximum planer width [mm] 265 Maximum thicknesser width [mm] 265 Maximum planing height [mm] 180 Maximum thicknesser cutting depth [mm] 3 Maximum planer cutting depth [mm] 2.5 Thicknesser feed speed [m/min] 6 Fence size [mm] 700 x 150 Machine dimensions (length x width) [mm] 1080 x 269 Weight [kg] 170 Total engine power S6: 2.6 kW Power supply 230V

Condition: new, Year of construction: 2026, Planer-thicknesser – versatile woodworking machine A planer-thicknesser is a versatile woodworking tool that allows for flattening, thicknessing, and smoothing wood surfaces. Ideal for carpentry and furniture manufacturing, it enables precise planing, edge processing, board production, creation of joinery components, and preparation of materials for gluing. This is a stable machine equipped with a high-quality cast iron table, cutting knives for material removal, an electric motor, and convenient adjustments that make it easy to operate. Also known as a jointer, the planer-thicknesser is designed for initial processing of both rough and hard wood, as well as soft lumber. Its purpose is to level, smooth, and bring wood to the desired thickness through mechanical processes. It’s especially valuable in carpentry and furniture production, where precision and repeatability are essential. Stable construction with enhanced weight for vibration resistance The machine weighs 170 kg and features wide, ground cast iron tables (250 mm), ensuring excellent stability and safe operation. Additional rubber feet allow vibration-free operation. VERSION with a high-performance motor – Total power (S6): 2.6 kW The PT260 planer-thicknesser stands out with its exceptionally powerful motor: Total power (S6): 2.6 kW Continuous power (S1): 2.0 kW This is significantly more than what many competitor machines offer, translating into better performance and more stable operation. Stronger motor = better efficiency and easier processing of hardwoods. Redswt Axpjpfx Aa Ujp Hardwoods require more power to process, and this motor handles them with ease. Effortless conversion from jointer to thicknesser Switching between jointer and thicknessing functions is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the dust extraction hood. Precision and ease of adjustment Smooth table height adjustment with scale Central column-mounted thicknessing table with handwheel for height regulation 700x150 mm aluminum tilting fence with scale strip for accurate angle settings from 90° to 45° Technical Specifications: Parameter Value Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction port diameter 100 mm Tilting fence angle range 90° – 45° Number of knives 3 Knife dimensions 250x30x3 mm Table dimensions 1100x250 mm Thicknessing table dimensions 600x248 mm Max. planing width (jointer) 250 mm Max. planing depth (jointer) 5 mm Max. thicknessing depth (single pass) 2.5 mm Max. cutting depth (thicknesser) 3 mm Max. workpiece height (thicknesser) 180 mm Thicknesser feed rate 6 m/min Fence dimensions 700x150 mm Machine dimensions (L x W) 1100x250 mm Weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 400 V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Rjdpfxjvxh T Do Aa Uep Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90–45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 410 mm Maximum thicknesser width 408 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 3.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1640×410 mm Weight 280 kg Motor speed 2800 rpm Motor power s1 4.0 kW s6 5.6 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, CORMAK PT310ECO Thickness and Surface Planer with Spiral Cutter Block – Precision and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser engineered for high finish quality, reliability, and low noise levels. Thanks to its spiral cutter block with 30 replaceable carbide inserts, the machine delivers exceptionally smooth surfaces with significantly reduced vibration and noise. Its stable construction and powerful motor make it a versatile solution for professional woodworking—both in carpentry shops and in artisan workshops. Key Advantages Spiral cutter block – 30 inserts (310 × 25 × 3 mm) provide long tool life, precise planing, and reduced noise levels. Massive cast iron work tables – absorb vibrations and ensure stable material feed. High power output – 2.2 kW motor (S1) / 2.6 kW (S6) ensures consistent performance during demanding operations. Large working area – 310 mm planing width and 180 mm height capacity for various workpieces. Effective chip extraction – Ø100 mm extraction port allows easy connection to dust collection systems. Construction and Technology The PT310ECO is equipped with a spiral cutter block of 75 mm diameter, ensuring smooth operation and significantly longer durability than traditional knives. Each insert can be rotated four times, greatly reducing maintenance and operating costs. The planer-thicknesser features wear-resistant cast iron tables: 1290 × 310 mm (planer) and 540 × 310 mm (thicknesser). The adjustable fence angle between 90° and 45° allows for accurate guiding of materials even at an angle. Precision and Performance Maximum cutting depth: Planing mode: 3 mm Thicknessing mode: 4 mm Cutter block rotation speed: 5,500 rpm The machine’s rigid frame enables surfaces that are ready for gluing, lacquering, or further processing. A reliable thickness planer for both mass production and small batch work. Applications The PT310ECO is the ideal solution for: Professional carpentry and furniture workshops Prototyping labs and training centers Industrial maintenance departments Technical schools and trade colleges Standard Equipment Spiral cutter block with 30 inserts Cast iron work tables Cutter head guard Ø100 mm dust extraction outlet Feed switch and emergency stop switch Optional Equipment Mobile base Dust extractor Technical Specifications Specification Value Planer table dimensions 1290 × 310 mm Thicknessing table dimensions 540 × 310 mm Spiral cutter block diameter 75 mm Cutter block speed 5,500 rpm Cutting inserts 310 × 25 × 2.5 mm Fence tilt angle 90°–45° Chip extraction outlet Ø100 mm Maximum thicknessing height 180 mm Rsdpfew Ab Afjx Aa Ujp Max. cutting depth 3 mm (planing) / 4 mm (thicknessing) Motor power (S1 / S6) 2.2 kW / 2.6 kW Maximum workpiece width 310 mm Weight (gross) 200 kg

Condition: new, Year of construction: 2026, CORMAK PT260 230V Jointer-Thickness Planer – NEW VERSION Compact and precise woodworking machine for professional and hobby use The jointer-thickness planer is a versatile woodworking tool that allows for accurate flattening, thicknessing, and surface smoothing of wood. Ideal for furniture making, carpentry, and material preparation, it performs jointing, planing, edge processing, board production, and surface preparation for gluing. Featuring a durable cast iron table, three-blade cutterhead, powerful motor, and precise adjustment controls, it ensures high performance with ease of use. Applications The CORMAK PT260 230V jointer-thickness planer is ideal for: Woodworkers and craftsmen producing furniture elements, moldings, and wood structures Renovation and construction workshops processing raw and laminated timber Hobby workshops seeking a reliable, high-precision planer for home use Schools and training centers providing hands-on woodworking education on professional equipment Standard Equipment Ø75 mm cutterhead with 3 knives (250 × 30 × 3 mm) Jointer table: 1100 × 250 mm Thickness planer table: 600 × 248 mm Adjustable aluminum fence: 700 × 150 mm (tilting 90–45°) Anti-vibration rubber feet Dust port Ø100 mm Operating manual (Polish and English) CE Declaration of Conformity Optional Accessories Mortising and drilling attachment Chip and dust extraction unit Knife setting jig Roller support stands Key Features ✅ Durable cast-iron construction ✅ Compact design suitable for small workshops Rsdsw H R Aispfx Aa Uep ✅ Smooth and accurate planing and jointing ✅ Quick adjustments for thickness and depth ✅ Efficient chip removal via 100 mm extraction port Technical Specifications Parameter Value Cutterhead diameter 75 mm Cutterhead speed 4000 rpm Number of knives 3 Knife dimensions 250 × 30 × 3 mm Jointer table size 1100 × 250 mm Thickness planer table size 600 × 248 mm Max. jointing width 250 mm Max. jointing depth 5 mm Max. thicknessing depth 2.5 mm Max. thicknessing cutting depth 3 mm Max. workpiece height for thicknessing 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Fence tilt angle 90° – 45° Dust port diameter Ø100 mm Overall dimensions (L × W) 1100 × 250 mm Machine weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 230 V CE certification Yes