Used Biesse Rover 321 R for sale (337)

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000047728, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, number of axes: 3, number of slots in tool magazine: 168, total length: 12,000 mm, total width: 4,500 mm, table length: 3,100 mm, table width: 2,205 mm, Equipment: CE marking, documentation/manual, FT Plus matrix table Working area: 3,100 x 2,205 mm Multi-zone vacuum system with 10 clamping areas Electrospindle: 19.2 kW Boring head: BH 10 16-position rotary tool changer 8-position rotary tool changer 2 x 290 m³/h vacuum pump Itsdpfx Aksz R N R Dopsn Sweeping arm Automatic label printing in the loading zone Outfeed conveyor belt for workpieces: 3,740 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Work area X: 3100 mm Work area Y: 1500 mm 5-axis interpolating electro-spindle, 13 kW, HSK-F63 connection Extraction hood with 19-position slats Drilling bits for vertical drilling: 17 Drilling bits for horizontal drilling X: 6 Drilling bits for horizontal drilling Y: 4 Blade for grooving in the X and Y directions Rack-type tool changer with 9 positions Isdpfx Akjz R Nrnspjtn Circular tool changer with 10 positions Tool holder with HSK F63 connection, with short integrated flange, for blades that can be used on the 5-axis unit Blade diameter 300mm, for tool holder cone with integrated flange Work table with 6 supports Software: Biesse bSolid Control panel Vacuum pump, 120 m3/h Chip conveyor belt Safety systems with front and rear bumpers

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Itodpfx Akez R I U Iopsn Best regards, Ihor Balychev.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Working area X: 3200 mm Iedpfx Asz R I Sgskpetn Working area Y: 1550 mm Electrospindle Drilling bits for vertical drilling: 10 Drilling bits for horizontal drilling X: 4 Drilling bits for horizontal drilling Y: 2 Blade for grooving in the X direction Disc tool changer with approx. 16 positions Worktable with 6 rows of stops Programming software: Biesse b_Suite3 Vacuum pump at 100/120 m3/h Safety mats Protective screens Weight approx. 2685 kg. Only 412 operating hours for the electrospindle and 92 hours for the drilling unit Includes 1 horizontal unit for door machining with 2 outlets.

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Itodpfxoz Ii Axj Akpjn Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 1000028154, functionality: fully functional, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: Iedpfx Aexdl H Uokpjtn HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working area X: 3280 mm Working area Y: 1320 mm Working area Z: 170 mm 13.2 kW electrospindle Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Ijdpfjz A Iglox Akpetn Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 12-position revolver tool changer Work table with 6 rows Programming software: BiesseWorks 90 m3/h vacuum pump Safety mats Protective netting Approximate weight: 3000 kg Door and cone grooving unit with ISO30 connection available at an extra cost.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: approx. 3765 mm Working area Y: approx. 1560 mm Working area Z: 170 mm 5-axis electrospindle, without drilling units Tool changer with approx. 16 positions Iedpfjzccfyox Akpjtn Work table: Nesting table Software: bSolid 2 Busch MM 1322 vacuum pumps Automatic panel loading system Automatic panel unloading system with motorized transfer Protective screens Weight approx. 3700 kg. Available January 2027

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm Iedpezlz Svsfx Akpetn • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3855 mm Working area Y: 1650 mm Z-axis workpiece clearance: 245/290 mm 5-axis electrospindle, HSK F63 mounting Main electrospindle power: 16 kW Itjdpfx Ajz Hxmqjkpjn Drilling spindles for vertical drilling: 5 Drilling spindles for horizontal drilling X: 2 Drilling spindles for horizontal drilling Y: 2 22-position chain-type tool changer Work table with 8 rails Automatic EPS tables Software: Biesse bSolid Vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety guards Safety device compliant with CE standards, with impact bar and double light curtain Approximate weight: 5800 kg Only 2774 operating hours Includes Uniclamps for window and door frames Available immediately

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 6800 mm Working area Y: 1840 mm 19.2 kW electrospindle with C-axis, 360-degree interpolating torque Number of vertical drilling heads: 30 Number of horizontal drilling heads X: 6 Number of horizontal drilling heads Y: 4 Blade for grooving in the X direction 8-position turret tool changer 22-position chain tool changer Work table with 10 rows, EPS automatic clamping system Numerical control: BH660 Itsdpfezy Hnrjx Akpen Programming software: BiesseWorks advanced 1 vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety mats Protective screens Approximate weight: 7050 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working range X: 3855 mm Working range Y: 2650 mm Working range Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Worktable with 6 supports 250 m3/h vacuum pump (2023) Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Iodpfx Akoz Atb Ropjtn Safety mats Protective netting Approximate weight: 6300 kg Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit Available at the end of November 2026

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Isdpfx Akjwlcqvjpjtn Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Isdpszvwh Isfx Akpjtn Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Ijdpezzbcyefx Akpetn Saw unit Vacuum pump Tools

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16 Itedpfx Akezvwilspsn

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops Itsdpfx Aey U Naiekpon 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 1992, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, CNC milling machine Rover 342 with 1 milling motor, saw blade, and cross-drilling attachments is fully functional but has been disassembled by the seller from a closed-down factory. Itsdpfxszl Uayj Akpjn

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Itedpfx Aszqtztjkpsn Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Decommissioned 07.2026 as unnecessary Iedpfxeznk Rmo Akpotn

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 660 mm, number of axes: 5, number of slots in tool magazine: 22, controller manufacturer: BIESSE, controller model: XP600, spindle speed (max.): 22,000 rpm, This 5-axis BIESSE Rover C 6.65 was manufactured in 2009. It features a working area of 6,200 x 1,520 x 275 mm and a powerful main electrospindle with a maximum speed of 22,000 RPM. The machine includes a 22-position tool changer and an integrated vacuum system for efficient operation. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover C 6.65 CNC processing center we have for sale. Contact us for further details. Iodpfx Ajz Trctskpotn - Control Unit: Biesse XP600 (Upgraded to PC with Windows 10 OS in 2021)- Main Electrospindle Power (S1 100%): 12 kW @ 12,000 RPM- Main Electrospindle Power (S6 40%): 15 kW @ 12,000 RPM- Max Spindle Speed: 22,000 RPM- Tool Interface: HSK F63- C-Axis: 360° continuous rotation (Replaced complete in 2015)- B-Axis: +/- 100° (positioning), +/- 98° (interpolation)- Z-Axis Stroke: 660 mm- Z-Axis Feed Speed: 30 m/min- Drilling Head: BH 9 (5 vertical spindles at 32 mm pitch in Y, 2 horizontal double-output spindles)- Tool Changer: 22-position chain-type tool changer (180 mm pitch, max tool dia 250 mm) + 1-position Pick-up tool changer- Work Table: 10 ATS work tables (L = 1,525 mm), 30 module supports with Electronic Positioning System (EPS X-Y)- Vacuum System: Vacuum pump 250 m³/h (Replaced in 2016)- Cooling Unit: 1,600 W liquid cooling unit for electrospindles- Chip Conveyor: Integrated chip transport belt in machine bed- Optional Equipment: Uniclamp clamping devices (20 double-stroke, 10 round), 8 horizontal clamps, 20 vacuum modules (132x146 H74mm), 6 vacuum modules (132x75 H74mm), 8 positioning aids (36 kg lift force each), saw blade 350 mm Z=28, safety fence elements, control cabinet with air conditioning.- Software: NC-Hops 5-axis license, ACADemy 2D CAD, Automatic suction cup positioning module.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Working area X: 6250 mm Working area Y: 1840 mm Working area Z: 250 mm 13.2 kW electro-spindle, HSK F63 connection Vertical drilling heads Horizontal drilling heads X: 8 Horizontal drilling heads Y: 4 Grooving blade in X direction 10-position revolver tool changer 14-position chain tool changer Working table with 12 rails Programming software: BiesseWorks Advanced 1 vacuum pump at 250 m3/h Chip conveyor belt Safety mats Ijdezy Hc Nspfx Akpstn Protective netting Approximate weight: 7200 kg.

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW 3-axis machine Drilling unit: Technical data - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) Ijdpfx Aszuwxdekpstn - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles

Condition: used, Year of manufacture: 2011 Colour: White Empty weight: 3.000 kg - Year: 2011 - Serial number: 56604 - Drilling unit present: Yes - Saw unit present: Yes - Vacuum pump present: Yes - Tools included: Yes - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Isdpfozy Nb Isx Akpstn

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Itedpfsycvcxex Akpon