Used Scrapers for sale (641)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: PI2512080FF001, tank capacity: 600 l, usable tank capacity: 600 l, total length: 2,000 mm, total width: 1,520 mm, total height: 1,700 mm, inner diameter: 1,200 mm, wall material: stainless steel, discharge height: 1,000 mm, input voltage: 38 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, 1. The pot liner is made of 304 food-grade stainless steel, with an inner liner of 5mm and an outer liner of 3mm. The pot liner is formed in one stamping process. 2. Pot inner diameter size: 1200mm, depth 750mm, working capacity approximately 200-400kg. 3. The dimensions of the equipment are approximately 2000mm in length (including control cabinet), 1520mm in width, and 1700mm in height. (The height when the large arm is raised is about 2450mm). 4. The total power of the equipment is 38.2 kW, with a heating power of 36 kW (controlled in three levels, each can be turned on separately). The mixing motor is 3 kW (using variable frequency speed regulation). 5. Heating method: The heating tube heats the thermal oil, allowing for setting the temperature, frying time, and continuous frying for extended periods. 6. The main structure of the frame is entirely made of 80*80 high-strength stainless steel. Dcede Agm S Topfx Ab Asp 7. Stirring system: It adopts a special planetary tilt rotation, 360-degree scraper without dead corners, and is equipped with a stirring auxiliary device. The stirrer uses a polytetrafluoroethylene scraper, and the pot has a side scraper device. 8. The stirring belt has variable frequency (the stirring speed can be adjusted), comes with a gear-free maintenance motor and uses thermal oil. 9. The equipment has dual-cylinder hydraulic discharge, equipped with a 1.5kw hydraulic station, with a discharge height reaching 900-1000mm.

Condition: used, Year of construction: 1988, operating hours: 6,422 h, 1988 | Caterpillar 613C | Used Scraper | 6422 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 48 inspection points 38 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Immediately ready for use, with excellent starting and engine behavior. The machine runs very well overall; a minor leak was detected in the rotary drive of the shield - typical for devices of this construction year. Dsdpfx Abjzzz T Es Aocp 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41097 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar Dodpfs Afhlaex Ab Ascp Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Note: The machine has already been dismantled.

Condition: used, Year of construction: 2007, operating hours: 9,908 h, 2007 | Caterpillar 621G | Used Scraper | 9908 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 151000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Dcjdsz Itppepfx Ab Aop 👷‍♂️ Inspected by an independent expert 49 inspection points 42 approved ✅ 5 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Good general condition. The wheels show significant wear, especially the rear left wheel. The loading blade also shows wear. The lower and outer walls have been reinforced with wear plates and welds, the right leveling cylinder has a leak. The body elements show some impact scratches and damaged paint. Also presence of oxidation. The various axles have play. The seat back is damaged as well as the cabin floor. Some of the blade travel rollers are stuck. Air leak in the rear braking system. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41301 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Dcedpfx Asx Dnileb Aop Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 661351, measuring range X-axis: 275 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 300 mm, total height: 294 mm, type of input current: AC, total width: 77 mm, overall weight: 1 kg, input voltage: 230 V, table length: 122 mm, repeat accuracy: 0.02 mm, year of last overhaul: 2026, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, 1 Careful owner, approx 500 hours of usage. Current Calibration certificate dated Nov 2026. Comes with the following: HP ZBook 15 G3 Workstation Laptop - High specification laptop PC for use with Creaform Scanners. Windows 7 Pro 64bit 15" Display UHD Screen Intel i7-6700HQ 64GB DDR4 RAM NVIDIA Graphics Quadro M2000M 4GB 256GB SSD M.2 NVMe (approx. 600hrs powered) 500GB HDD (approx. 600hrs powered) VX Elements software installed. VX Remote 10 Inch Tablet 3D Scanner External Battery Bank- 72wh Handyscan 3D Scanning Turntable with bag Dcede Ahy Huepfx Ab Asp Positioning Targets - Magnetic - Pack of 750 in metal tin Positioning Targets - Adhesive - Pack of 500 - box of 34 units (17000!) Scraper for targets - 1 unit Extra Spare USB 3.0 Cable for HandySCAN700 - 4 meters AESUB blue scanning Spray - 1 can Rugged Custom built freight case for Scanner box (18mm structural Plywood)

Condition: excellent (used), Becomix Stirring & Mixing Tank Electric lift lid Scraper and mixer motors 316 stainless steel Dcodjx Dnkijpfx Ab Aop 3000 lts capacity

Condition: used, Year of construction: 2011, operating hours: 9,662 h, 2011 | Caterpillar 621G | Used Scraper | 9662 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 209000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Dodsz Itp Ajpfx Ab Aocp 47 inspection points 34 approved ✅ 12 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The tire wear is significant. Impact on the right rear rim. The hood cylinder, right side of the engine damaged. Impact and deformation at different places on the body. Three windows are cracked. The horn does not work. The reverse beep does not work. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41300 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2011, operating hours: 11,525 h, 2011 | Caterpillar 621G | Used Scraper | 11525 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 199900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 46 inspection points 36 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The plate keeps the rod of the cylinder from pushing the blade and tearing off welding, damaged and existing repair. Tire wear is significant. The rear ramp has been deformed and repaired presence of welding. The upper part of the push blade is deformed repairs have been made. The rear mudguards have also been repaired by welding. Access steps have been replaced with chains. Presence of oil under engine block. Multiple impacts, scratches, and oxidation on the bodywork. Absence of the right mirror. Seat backrest damaged. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41299 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Dodpfx Aboz Itqae Aocp 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Dodpfx Abe Afxuls Aecp Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Year of construction: 2026, condition: like new (used), Scraper chain conveyor robust and wear-resistant design Dcedeztzgcepfx Ab Asp optional: bar magnet separator please specify when requesting a quote: conveyor capacity m³/h dimensions

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Trough inner width 600 mm. Dcjdpfx Abszn N Udo Ajp Drive via geared motor with 4.0 kW.

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. Dcedpfx Abo Aazdxo Asp If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, New: Yes Year of construction: 2024 Dodpj Af R Rqefx Ab Aocp Applicable material: Manure

Condition: used, Year of construction: 2018 Dcedpfx Abo Af Unko Asp Applicable material: Manure

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 3,547 mm, total height: 2,163 mm, total width: 260 mm, conveyor belt width: 260 mm, delivery head: 1,700 mm, ejection height: 1,700 mm, conveying length: 3,567 mm, transport height: 1,700 mm, Magnetic scraper conveyors with a conveying capacity of up to 60 kg/h, drive motor 0.4 kW. Both conveyors were only used for a short period, less than 100 operating hours. They can be delivered individually or as a package with a suitable chip centrifuge, which was also only used for a short period. Dedpfxszwpnve Ab Ajcp

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Dedpfx Aezn N Tyjb Ascp With 2 sections. See PDF file for sketch. Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Year of construction: 2011, condition: used, functionality: unexamined, Scraper conveyor for sale. The conveyor consists of two sections – a horizontal and an inclined part. Length of the horizontal section: 6,870 mm, length of the inclined section: 5,120 mm, outer width: 1,580 mm, outer height: 1,780 mm, inner width: 1,270 mm, inner height: 1,090 mm, drive motor: 5.5 kW, slat pitch: approx. 280 mm. The conveyor is dismantled and ready for transport. The machine can be inspected at: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Dcjdpjwxb Tpjfx Ab Aep

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc Dsdozqz Hwepfx Ab Aocp * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Dodpezp Nycjfx Ab Ascp Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: used, Scraper conveyor Dcodpfx Abjz An U Ss Ajp Length: 21.7 m Width: 45 cm Electric motor included

Condition: used, Scraper conveyor Dedoz An Swopfx Ab Aocp Length: 14 m Width: 45 cm Electric motor included

Condition: used, Scraper coveyor Lenght: 15,8 m Dedpfxoz Ap H Aj Ab Ajcp Width: 45 cm Electric motor included

Condition: used, Year of construction: 2011, functionality: unexamined, For sale: Scraper conveyor (Redler). The conveyor was used to transport pellets from two granulators to a bucket elevator. Capacity approx. 8 t/h. Length: 13,300 mm, External width: 670 mm, Dsdpfx Abjwz I Ulj Ajcp External height: 750 mm, Bar width: 295 mm, Drive motor: 1.5 kW, Bar spacing: approx. 345 mm. The conveyor is dismantled and ready for transport. The machine can be inspected in Sępólno Krajeńskie, Kujawsko-Pomorskie Province, Poland.

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Dedo Aa Aqtjpfx Ab Aocp Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection