Used Woodworking for sale (12,235)

Condition: excellent (used), Year of construction: 2021, 2021 KIMLA BFN 1007 Linear CNC Gantry Milling Machine Table: 1000 x 750 mm, Working travel: 1000/700/300 mm, Spindle rpm: 24000 rpm, Spindle power: 19 kW, Tool chuck: HSK63F, Tools magazine: 20 pieces, Control: CNC, S/No: 3626 (2021), Machine weight: 5600 kg, Note: ONLY 623 spindle hours. Note: Machine located in Wroclaw, Poland. Dcjdpfj Ahq Awox Ab Aep

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Bargain due to business closure Striebig Standard 3 TRK Dcodpfxs Ah D Hfs Ab Ajp

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Djdpfx Absx U Dfgj Ajcp Shipping possible at extra cost!

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a scoring unit and veneer stop table. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick-cut veneer. Cutting length max. 4200mm. The saw unit and scoring unit are combined in a single unit, so that only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. Dcedpo Ahrgajfx Ab Ajp The function of the scoring blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with a continuous finger stop, adjustable from approx. 2 - 50cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2kW. Carbide-tipped precision cutting blade, sharpened. Scoring blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. Onboard tools. Saw blade and re-cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Dodez Iz Imepfx Ab Aecp Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Dsds Ah Rxcjpfx Ab Ascp Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: not inspected (used), functionality: unexamined, Package cutting saw mounted on a steel stand, 6 meters long. Djdpfe Aicd Rox Ab Aocp

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE Dcjdpfo Afxulex Ab Asp

Condition: excellent (used), Year of construction: 1998, Chain motor 2,2 kw Lock plate motor 0,5 kw Dcedpfj Ah Idwex Ab Aep Boring motor 0,5 kw weight of the machine ca. ca. 192 kg

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 457256, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 5,100 m³/h, Equipment: CE marking, documentation/manual, VACUMOBIL JZ300-L Anti-static material surcharge Suction nozzle, Ø220mm - PZR Djdpfxo Ad I Nvo Ab Aecp "Online" dust extraction surcharge, Jx300 French documentation

Condition: used, operating hours: 335 h, total height: 2,100 mm, total length: 6,500 mm, total width: 1,500 mm, Year of manufacture: 2009 Colour: White Weight: 2.200 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - Serial number: 74 - Operating hours: 335 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Type/Brand: 1856 - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1913 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: 1918 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1826 - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Type/Brand: 1833 - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1929 - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Type/Brand: 1964 - - Tools available: Yes - └ 9th unit type: Brushing unit - - Type/Brand: 1940 - - Tools available: Yes - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 60 - Min. panel length [mm]: 180 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 18 - Glue system: Glue pot - Type of glue: PUR - Voltage [V]: 400 - Current consumption [A]: 56.95 - Fuse [A]: 80 - Transport dimensions: 6500mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dcsde Ahygnepfx Ab Aop VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 210/2003, functionality: fully functional, operating hours: 6,635 h, power: 29 kW (39.43 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 3,000 mm, workpiece length (max.): 5,000 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,223 mm, total length: 9,420 mm, total width: 1,368 mm, overall weight: 4,350 kg, Equipment: CE marking, documentation/manual, HOLZ-HER ACCURA 1556 Premium – Year of manufacture 2020 – Very well maintained We are offering our HOLZ-HER ACCURA 1556 Premium edge banding machine, manufactured in 2020, for sale. The machine has always been treated with great care by its dedicated operator and has been fully maintained by the supplier throughout its entire service life. The machine has always been kept in excellent condition, and there have never been any major incidents or serious machine damage. Dcodo Ahhwzepfx Ab Aop Technical improvements and upgrades Reinforced pre-milling motors: The originally installed pre-milling motors were generally too light. Therefore, approximately two years ago, these were replaced with a heavier and improved type. These motors function excellently and represent a significant technical improvement compared to the original design. Automatically switchable profile milling cutters (factory option): The machine is equipped as standard with the option to automatically switch between the profile milling cutters with a radius of 1 mm (R1), a radius of 2 mm (R2), and chamfer milling cutters. This allows for easy and quick switching between different edge finishing operations without manual adjustment of the milling heads. Additional Riepe brush system: Riepe has installed an additional brush system specifically for cleaning and processing edge material with a deep surface texture. Condition and maintenance The machine has always been operated carefully, well maintained, and serviced according to the maintenance instructions by the supplier. Thanks to the consistent maintenance, careful operation, and implemented technical improvements, this is a well-maintained edge banding machine with extensive equipment. The machine can be viewed and demonstrated in working order by appointment. If you are seriously interested, we will be happy to provide additional information and photos.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding capability. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, with edge segments that can be switched on and off. Segment width of the pressure bar: 35mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency converter from 2 - 18 m/s. Belt feed speed steplessly adjustable via frequency converter from 2.5 - 13 m/min. Dodpjzqvmrefx Ab Ajcp Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension: 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outfeed table. Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200mm, 1 x 140mm, and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar contact points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connecting cable. Original paint, only spot-repaired in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Vector Speed: X/Y= 50m/min Vector Speed: Z = 15m/min Workpiece length: min. 200 mm Workpiece length: max. 3050 mm Workpiece width: min. 70 mm Workpiece width: max. 850 mm Workpiece Thickness min: 8mm Djdpfo Acw Hnjx Ab Ajcp Workpiece Thickness max: 56mm Drill Block with 13 Vertical Spindles Drill Block with 4 Horizontal drills in the X Direction Drill Block with 2 Horizontal drills in the Y Direction Grooving Saw X Direction Plausibility Check 5Kw Tool Change Spindle 4 Position Tool Changer Energy Saving Mode 400V 50Hz CE Marked

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 Dedpfx Abs Ahyp Ej Aecp - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dedpfx Abj Afznuo Ajcp Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm Dcedezv Uyuepfx Ab Ajp motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm with pressure comb: 15 mm less cutting height still in good condition

Condition: used, total width: 2,100 mm, total height: 2,400 mm, Year of manufacture: 2002 Colour: Blue Empty weight: 3.000 kg Dimensions (LxBxH): 410 x 210 x 240 cm Price: On request - Details: - └ Description: Needs repair - Year: 2002 - CE marking present: Yes - Serial number: 96164 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right Dodpfxo Ahx Tqs Ab Aecp - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: No - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - Feed table length [mm]: 945 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 14 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Fuse [A]: 63 - Transport dimensions: 4100mm x 2100mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1989, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 530 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 4,900 rpm, total length of planing tables: 2,752 mm, total width: 900 mm, total height: 1,100 mm, overall weight: 810 kg, PF 530i surface planer, - Year of manufacture: 1989, - Planing width: 530 mm, - Table length: 2752 mm, - Electrically adjustable infeed table - Speed: 4900 rpm, Diameter: 125 mm, Dcodpfx Ae Ahnr Eeb Asp - 4-knife cutterblock, planing knives 530x30x3 mm - Adjustable fence, swivels 45°, - Motor: 4.0 kW / 5.5 hp, 400V, - Control panel located on top, - Dust extraction port: 160 mm.

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimensions of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle speeds - Automatic or manual machine operation - Spindle motor: 9 kW - Hydraulic pump motor: 3 kW Dcodpfxozu R S Ro Ab Ajp - Diameter of extraction port: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,465 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, working height: 950 mm, working width: 400 mm, type of input current: three-phase, total length: 3,000 mm, overall weight: 300 kg, total height: 1,500 mm, total width: 650 mm, The Leif & Lorentz Angled Curtain Coater is an industrial coating machine designed for the fast and consistent application of coatings to wood and other suitable workpieces. With a coating width of 400 mm and an inclined conveying system, the machine is particularly suitable for coating long wooden workpieces and profiles. Depending on the shape of the product, the angled design allows two sides to be coated in a single pass. The coating quantity and feed rate can be adjusted to achieve the desired result. This specific Leif & Lorentz Angled Curtain Coater is available as a used machine. The machine is in fully working condition and has been completely inspected in our workshop. Dcsdps Ahqpyjfx Ab Ajp

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked Dcodpfxozzdyze Ab Asp ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. The machine has only been used very rarely and has hardly any operating hours. Probably less than 100 operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Dedpez Dp Ersfx Ab Aecp Swivel range: -5° to +45° Spindle diameter: 30 mm Vertical adjustment: 170 mm Spindle speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Optionally, a matching dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for material defects. No guarantee, warranty, or right of return.

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Dcodpfx Aoyl Numjb Asp Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. Dedpfx Aozfwm Nsb Aocp CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".