Used Lumber Planer for sale (1,706)

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame Ihodpfex Itr Nex Ag Ust • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin Ihodpfx Agsi Apuhe Ujt - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Iedpfx Asu Au I Tsg Ujht Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: used, Capacity: 80 m/min Isdpfxjg S Dm Ne Ag Ujht Planer feed table, tested. At speeds up to 80 m/min.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Ihedel Dw Nxopfx Ag Ujt cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) Ihjdpewwk Rbjfx Ag Uot New electrics and motor

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm Ijdpfx Ajx Ti Uqog Uoht - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer Ijdpfxox Upu Te Ag Ueht 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAG3 jointing nozzle -Pressure: 6.0 - 7.0 bar -Price: per piece Ihedpfx Agofdkgvo Uot Quantity: 6 pieces -Dimensions: 100/19/H19 mm -Weight: 0.1 kg/piece

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm spindle head adjustment horizontal 3160 mm Isdpfxouh E Tbe Ag Uoht spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t

Condition: used, Year of construction: 2009, working width: 230 mm, planing height: 130 mm, We are offering this used LEADERMAC LMC-423C four-sided moulder, year of manufacture 2009. Model: LMC-423C Serial number: 0802080 Frequency: 50 Hz Voltage: 380 V Amperage: 97.0875 A Phases: 3 Year: 2009 Tooling: Leitz Ihsdpox U Sbisfx Ag Uot If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Planing width 610 mm Sturdy cast iron construction Edge jointing fence Auxiliary stop 4 kW, 380 Volt Iodpfx Aox U Dgdeg Usht Two-knife wedge shaft Tables fold upwards Machine ready for immediate use

Condition: used, machine/vehicle number: YS910FLS4MVB1xxxx, Year of construction: 2014, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 21318 Specifications: 2014 model 4 axles L ft p 3 axle Length: 1299.5 cm Width:255 cm Ready for delivery Description: We have a 2014 MVB10-FLS4 4 axle T mmer trailer for sale. The trailer is EU approved and works as it should. Ready for delivery. Technical approved: Yes Isdpfx Asxcfkksg Ueht EU-approved until: 05.10.2026 Own weight: 5930 Width: 255 Length: 1299,5 Model: MVB10-FLS4 4 akslet 2014 MVB10-FLS4 4 akslet Tømmerhenger

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Isdpfxjx Upt Ae Ag Uoht Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. Ihsdpfx Asx S Rx Ijg Ujt • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: used, Available: 2 pieces Price per piece: 239.00 € + VAT knife: Strip planer blade Z2+ chamfer cutter Ijdpfjx Tu Rwsx Ag Ueht flight circle (ø): 125 mm drilling: 40 mm length: 170 mm material: steel

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm Iedpfxeway I Uo Ag Ujht total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: used, Year of construction: 2021,

Condition: used, machine/vehicle number: YY9AAA2646B01xxxx, Year of construction: 2011, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 17479 Specifications: - 2011 model - Tires (see pictures) Ijdevg Nrdjpfx Ag Ujht - Air suspension - Length: 1,305 cm - Width: 255 cm - Wheelbase: 136/538 cm - Net weight: 6,100 kg - Max payload: 29,900 kg Description: 2011 Trailer-bygg timber trailer. Can be delivered within a short time. Technical approved: no EU-approved until: 02.05.2023 Own weight: 6100 Total Weight: 36000 Payload: 29900 Width: 255 Length: 1305 Model: Trailer-Bygg tømmerhenger

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Ihjdpfx Agex Uptis Uot Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: good (used), For sale is a four-sided planer by Gubisch. Technically flawless, cosmetically in good used condition. Machine specifications: Ihodpfsx Dm S Sex Ag Uot Maximum dimensions: 180mm x 120mm Minimum dimension: 18mm x 6mm Max. material removal: 10mm Operating pressure: 6 bar

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm Ihsdpfex Ttbnox Ag Uet working height: 160 mm feed: 4 kW

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg Ihsdpfxowc A She Ag Ust ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control Ihsdpsx H Srlefx Ag Uot - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: excellent (used), Year of construction: 1984, 500 mm planing width Aigner fence If you have any questions or are interested, please feel free to contact us! Further information will follow. Ihsdpfx Agox Tu Euo Ujt