Used Scrap Winder for sale (698)

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: N386, Used Lefort 420 TE Baler shear Iveco Engine (very good on diesel) All in working order Can be seen in use Chsdpfozqtutsx Agkoa Complete with remote operating control

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. Chodpfezr Hw Dox Agkoa For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: good (used), Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece Codpfx Aoxyv Uhsgkeha -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Condition: excellent (used), Hose reel, hose dispenser, wall-mounted reel, hose reel, automatic hose reel Chodjx E Sxvjpfx Agksa -Manufacturer: Planeta, hose reel -Type: L-809 -Hose length: 14 m -Dimensions: 780/270/H550 mm -Weight: 20 kg

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, A mobile scrap shear in new condition is for sale. Inspections can be arranged at any time. Csdozlqgvepfx Agkoha

Condition: used, Year of construction: 2009, Overview This Strapex Endra HC2T is an automated pallet strapping and wrapping system, designed for securing palletized goods using horizontal strapping and wrapping processes. The machine combines a turntable-based wrapping system with horizontal strapping (banderoling), enabling stable and transport-secure pallet units. It is suitable for applications in beverage, logistics, and industrial packaging environments. The system is built for handling Euro pallets (½ and 1/1) with a maximum pallet height of 2,150 mm. Technical data - Manufacturer: Strapex - Model: Endra HC2T - Machine type: Pallet strapping and wrapping system (turntable based) - Year of manufacture: 2009 - Strapping type: Horizontal strapping - Wrapping type: Turntable-based stretch wrapping - Pallet types: Euro pallet ½ and 1/1 - Max pallet height: approx. 2,150 mm Cedpfx Agszf Ic Iokeha - Control system: Siemens S7 Equipment - Integrated horizontal strapping unit - Turntable-based wrapping system - Pallet conveyor system - Safety guarding with perimeter fencing - HMI control interface - Pneumatic components for strapping and handling

Condition: used, Year of construction: 2011, Overview This ROBOPAC / SIPA HELIX HS30 ring wrapper, manufactured in 2011, is designed for the automatic stretch wrapping of palletized shrink-packed beverage products. The system was previously part of a complete SIPA palletizing and wrapping line. The SIPA palletizing section has already been sold; therefore, only the ROBOPAC HELIX HS30 pallet wrapping section is still available. The wrapper is a ring-type stretch wrapping machine for stabilizing pallet loads after palletizing. The machine is currently dismantled and reported to be in good technical and working condition. It is available immediately from Serbia. Codezf Ehujpfx Agksha Technical Data - Manufacturer: ROBOPAC - Model / Type: HELIX HS30 - Machine Type: Automatic ring pallet stretch wrapper - Year of Manufacture: 2011 - Application: Automatic wrapping - Wrapping System: Ring wrapper - Wrapping Material: Stretch film - Operation: Automatic pallet wrapping after palletizing - Previous Line Capacity: approx. 39 pallets/hour, depending on product configuration - Included Components: ROBOPAC HELIX HS30 ring wrapper section - Documentation: Manuals and electrical drawings available - Spare Parts: Not included - Status: Dismantled - Availability: Immediate

Condition: excellent (used), Technical condition: very good Visual appearance: very good Cedpfot Hty Uox Agkjha Please contact Ferdinand Pater for more information

Condition: good (used), Year of construction: 2025, operating hours: 1,000 h, functionality: fully functional, For sale is a container-type scrap shear with a cupola attachment and a bottle attachment for reducing the cutting height. The machine can be inspected at any time. Chedszhwvcepfx Agkoa

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly Csdpfxezb Azfe Agksha - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm Codpjwu Nwnefx Agksha with infeed vibrating trough

Condition: used, Year of construction: 1993, functionality: fully functional, Intended use: For the automatic winding of wire onto spools. The twin spooler is suitable for use behind a drawing machine and inline annealing furnace. Technical details: Control system: Siemens S5 Materials processed so far: CU - AL, AL alloys for spools 630 mm Number of spooling stations: 2 Technical condition: HMI, main motor controller, lay-on motor, and transport motor renewed Wire diameter min: 1 mm Wire diameter max: 3.5 mm Spool flange diameter max: 762 mm Total spool width max: 472 mm Codpfx Aszf Ak Hegkeha Spool bore diameter max: 127 mm Spool axis: horizontal Spool change: automatic Spool speed: 2200 min⁻¹ Automatic shutdown in case of wire breakage and full spool: yes Lay-on system: available Arbor clamping: hydraulic Drive type: DC motor Controller manufacturer: Siemens Drive power: 2 x 35 kW Drive speed: 2370 min⁻¹ Operating voltage: 380 V Frequency: 50 Hz Electrical cabinet: available Additional data: Spool change: Fully automatic Empty spool feeding via conveyor belt. Full spool unloading via spool table and conveyor belt. Consisting of: NIEHOFF VM 400 dancer Electrical cabinet

Year of construction: 2018, condition: ready for operation (used), An automatic slitter-rewinder Jurmet is available. Total operating distance: approx. 8900km, max. working width: 1600mm, min. parent roll width: 300mm, max. parent roll diameter: 1000mm, parent roll core inside diameter: 76mm/152mm, finished roll core inside diameter: 25.4mm/76mm, max. mechanical speed: 500m/min, max. web tension: 153N, knife positioning accuracy: +/-0.3mm, pressure roller width: 1600mm, max. product weight: 150g/m², max. product thickness: 220µm, operating hours: approx. 9850h. Documentation available. An on-site inspection is possible. Chsdpfx Aszhnupjgkoa

Condition: good (used), functionality: fully functional, empty load weight: 3,210 kg, mount diameter: 400 mm, overall weight: 3,210 kg, cutting length (max.): 750 mm, type of input current: three-phase, working width: 750 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, Hydraulic guillotine shears for recycling – alligator scrap shear. Manufacturer: LEFORT, Belgium; model: 750; hydraulically operated working arm; blade length: 750 mm; jaw opening height: 400 mm; hydraulically adjustable lateral hold-down arm; electric motor power: 15 kW, star-delta starter to reduce start-up current; 3-wheel mobile chassis with rear steering wheel; overall dimensions: 3.2 x 1 x 1.25 m; working body: cast construction; weight: 3,210 kg; CE marking: not available; technical documentation (DTR): not available. Machine is connected to power, ready for inspection. Cutting capacities: round bars: 75 mm; square bars: 70 mm; sheet metal: 508 x 15 mm. Cjdpox Hrrljfx Agkoha

Condition: new, functionality: fully functional, overall weight: 620 kg, Year of construction: 2024, New shredder attachment for excavators from 7 tons upwards, 360-degree rotating. Made of Hardox steel. Cjdpfx Agjzkau Hekjha Dimensions can be seen in the photos.

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm Codpfxsgrug Aj Agkjha edge strip width: 5 – 50 mm material (strength): 1.000 N/mm²

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm Csdpfxjbicbzs Agkoha strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm material (strength): 1.000 N/mm²

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Csdpfegnyglox Agkoha

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Csdpfjgrug Rox Agkjha

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm Chsdpfeh T Dctex Agksa weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Cedpfxjwhnbfo Agkoha

Condition: good (used), functionality: fully functional, fuel type: diesel, DGUV certified until: 11/2026, Year of construction: 2019, operating hours: 1,517 h, machine/vehicle number: CAT00330KNDH00178, For sale is a Caterpillar scissor lift model 330 GC, manufactured in August 2019, with only 1,515.6 operating hours. It is equipped with an attached Demarec (Kingshofer) shear, model DRS-60-B. The machine is available immediately and can be inspected in the port of Karlsruhe by prior arrangement. Chodezb Nmhjpfx Agksa Further information is available upon request. The sale is exclusively to commercial customers. This offer is non-binding and subject to a detailed technical and legal review as well as a contractual agreement between the parties.

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Chodjy Tlzaopfx Agksa

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins Chjdpfx Aexdnn Ijgkea - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: new, For sale is our Trumpf remaining grid pallet. Dimensions: Suitable for sheet metal with dimensions of 2500 mm x 1250 mm. The pallet is new and unused, but it was stored outdoors and therefore has some surface rust, which will disappear after several uses. Also suitable for transporting wood – firewood. The pallet is lifted with a forklift and emptied via a tilting mechanism. Csdezd Sfwspfx Agksha Collection only.