Used Weeke for sale (75)

Condition: used, machine/vehicle number: 008568, X axis working area: 2500 mm Kjdpfezvwh Uox Afksdr Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 14

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Kdsdpokw H Ekofx Afkor Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: used, Year of construction: 1998, WEEKE BP 150/K Manufacturer: WEEKE Type: BP 150/K Kdodpfjzvbhrsx Afker Year of construction: 1998 Machine type: CNC machining center / Point-to-point cantilever machine Working area X approx. 3,645 mm* Working area Y approx. 1,250 mm* Working area Z approx. 250 mm* 1 main spindle power: 10 kW Main spindle speed max. 24,000 rpm Tool holder: HSK-F63 Tool changer: 8-position 4th axis 30 vertical drilling spindles 6 horizontal drilling spindles Table system: Console table Number of consoles: 8 Vacuum pump Safety device Control system: HOMAG HOMATIC 2000 / HOMATIC 2000 IPC* Software: HOMAG woodWOP 4.5 4th axis: C-axis / NC-controlled auxiliary axis*

Condition: used, Year of construction: 2014, Drilling and dowel insertion machine Manufacturer: Weeke Type: OPTIMAT ABD150 Year of manufacture: 2014 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Kodszuyn Iepfx Afksdr

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,455 h, number of axes: 4, number of slots in tool magazine: 14, table length: 3,250 mm, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4-axis Weeke PROFI BMG211/32/12/K was manufactured in 2015. It operates on a supply voltage of 400 V / 230 V and is designed for 3-phase power with a maximum operating full load current of 38 A. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke PROFI BMG211/32/12/K machine we have for sale. Contact us for further details. • X/Y-Axis Speed: 70 m/min • Z-Axis Speed: 20 m/min • Table Length X: 3250 mm • Usable Table Length Y: 1150 mm • Workpiece Clearance: 1250 mm • Optional Usable Table Length Y: 1400 mm • Optional Workpiece Clearance: 1600 mm • Table Thickness Z: 125 mm • Workpiece Clearance Height: 225 mm • Workpiece Supports: 6 • Vacuum Fields: 2 • Vacuum Generator Capacity: 70/84 m³/h at 50/60 Hz Kdsdpfx Afszuhdqsker • Vacuum Cups: 12 × 114 × 160 × 100 mm • Additional Vacuum Cups: 2 × 125 × 75 × 100 mm • Pneumatic Side Stops: 2 • Pneumatic Longitudinal Stops: 6 • Manual Folding Stops: 4 • HPL Positioning Aids: 4 • Laser Vacuum Cup Positioning: Yes • Laser Type: Crosshair Projection • Main Usage: 1455 h • Secondary Usage: 743 h • Occupancy: 8586 h Spindle / Drilling / Tooling • Main Spindle: F1-HSK63-12 kW • Spindle Speed: 1250–24000 rpm • Spindle Power: Up to 10/12 kW • Spindle Interface: HSK63 • Spindle Cooling: Air-Cooled • Spindle Lubrication: Permanently Greased • C-Axis: 360° Interpolating Axis • Vertical Drilling Unit: V12 High Speed 7500 • Vertical Drilling Speed: 1500–7500 rpm • Vertical Drilling Power: 2.3 kW • Vertical Drilling Depth: Max. 38 mm • Vertical Drilling Depth with Special Drill: Max. 55 mm • Maximum Vertical Drill Diameter: 35 mm • Vertical Drill Holder: Ø10 mm • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Unit: H4X/2Y • Horizontal Drilling Spindles: 6 • Horizontal Spindle Arrangement: 4 in X / 2 in Y • Horizontal Drilling Speed: 1500–7500 rpm • Horizontal Drilling Depth: Max. 38 mm • Maximum Horizontal Drill Diameter: 20 mm • Grooving Saw Unit: N1 X-Y 90° • Grooving Saw Swivel Range: 90° • Grooving Saw Cutting Depth: 30 mm • Grooving Saw Diameter: 125 mm • Grooving Saw Blade Thickness: Max. 5 mm • Grooving Saw Speed: 1500–7500 rpm • Tool Magazine: W14 • Tool Magazine Capacity: 14 Tools • Tool Interface: HSK63 • Maximum Tool Weight: 6 kg • Maximum Tool Diameter with Full Magazine: 130 mm • Maximum Tool Diameter with Free Adjacent Positions: 260 mm • Tool Change Time: Approx. 12–18 s FLEX5+ / Control / Equipment • HP FLEX5+ Aggregate: Sawing / Milling / Drilling • FLEX5+ Milling Swivel Range: 0–100° • FLEX5+ Drilling Swivel Range: 0–100° • FLEX5+ Sawing Swivel Range: 0–90° • FLEX5+ Maximum Milling Tool Diameter: 20 mm • FLEX5+ Maximum Drilling Tool Diameter: 10 mm • FLEX5+ Maximum Sawing Speed: 15000 rpm • FLEX5+ Tool Interface: WFC40-25 • Control System: HOMAG Group powerTouch • CNC Control: powerControl PC86 • Display: 21.5" Full HD Multitouch • Processor: Intel Core 2 Duo • Hard Drive: Min. 160 GB SATA • Ethernet: 10/100 Mbit RJ45 • Operating System: Windows 7 Professional • Software: woodWOP • Automatic Tool Changer Loading Aid: Yes • TeleserviceNet: Yes • Electrical Supply: 400 V • Frequency: 50/60 Hz • Ambient Temperature: +10°C to +40°C • CE Safety Equipment: Yes • Supply Voltage: 400 V / 230 V • Phase: 3 Phase • Frequency: 50 Hz • Maximum Operating Full Load Current: 38 A • Fuse Rating: 50 A • Control Voltage: 24 V • CE Marking

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) Kodpozuhbisfx Afkodr • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,860 mm, travel distance Y-axis: 1,793 mm, travel distance Z-axis: 185 mm, number of axes: 3, overall weight: 4,300 kg, spindle motor power: 17,000 W, spindle speed (max.): 24,000 rpm, This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Kdedpfezugvfjx Afkor • Electrical power: 400 V · 50 Hz · 3~+N · 17.5 kW · 35 A · 24 V • Milling spindle: 1 unit • Working field (X/Y/Z): 3250 × 1250 × 1215 mm • Rapid traverse speed (X/Y/Z): 100 / 50 / 20 m/min • Routing area: 3595 × 1378 × 125 mm • Alternative operation area: 1450 mm • Two-field operation area: 1100 mm • Compressed air required: 7 bar • Dust extraction (minimum): 3170 m³/h

Condition: used, machine/vehicle number: 007734, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Kdjdpfx Aew Idb Hsfkjr Total number of drilling spindles: 19

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Kedpfx Aszrd Sfofkjdr Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale: Weeke Optimat BHX 500 vertical CNC machining center, manufactured in 2011, designed for drilling, milling, and grooving sheet materials in the furniture industry. The machine enables fast and precise machining of parts and is suitable for both serial and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year of manufacture: 2011 Machine type: 3-axis continuous CNC machining center CNC control system: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 from above, 48 from below) 36 vertical spindles 12 horizontal spindles Grooving saw Kdedpjzvftlefx Afkjr Milling cutter (from above and below) 125 mm saw, rotatable by 90° Automatic clamping and workpiece transport system Possible applications: Drilling for dowels and fittings Milling and grooving Machining of chipboard, MDF, HDF, plywood, and solid wood Advantages: The ability to machine two pieces simultaneously significantly increases productivity Fast retooling and workpiece changes High precision in drilling and milling Ideal for the production of cabinet furniture, kitchens, wardrobes, and interior elements Condition: The machine is regularly serviced and fully functional. Test run possible during inspection. Availability: end of October

Condition: used, Year of construction: 2004, power: 17.5 kW (23.79 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,860 mm, travel distance Y-axis: 1,822 mm, travel distance Z-axis: 185 mm, workpiece length (max.): 3,250 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 125 mm, number of axes: 4, number of slots in tool magazine: 8, total height: 2,300 mm, total length: 5,830 mm, total width: 4,100 mm, overall weight: 4,300 kg, Equipment: CE marking, Weeke BHC Venture 3 Description (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Kdjdpfx Afjzdyhgokor Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h Kdsdpfozmtl Rox Afkor EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag drilling systems) – OPTIMAT BHC 200 – High-precision CNC machining center with woodWOP 8! Kdodpfx Aswx Iidsfksr Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • - Dust-proof linear guide system • - Rack and pinion drive in the X-axis and ball screw in the Y- and Z-axis • Travel ranges of the axes: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Work table: • X = 5250 mm (length) • Y = 1250 mm (width) • Z = 100 mm (thickness) Optimat BHC200 • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Processing of wood, plastic and light metals possible • Condition: good; very well maintained, regularly serviced / last service 03/25 • Modernization measures of the machine: 10/2022 - New machine computer / Siemens industrial PC - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining for a wide range of materials • Ideal for carpentry shops, furniture manufacturers and custom-made products • Reliable performance, even for demanding projects Scope of delivery: • Machine + Industrial PC • Operating manual • CE SAFETY AND PROTECTION EQUIPMENT - Protective grille in the side and rear area - Three-part safety mat in the front area allows the placement of workpieces in the non-active working area. Inspection and test run on-site possible and welcome! Dismantling and transport must be arranged by the buyer.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-253-05-4317, workpiece height (max.): 60 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, controller model: Powercontrol PC85T mit Woodwop software, TECHNICAL DETAILS Process: horizontal drilling – injecting adhesive – driving in dowels Workpiece length min/max: 20 mm / 1,250 mm Workpiece width min/max: 50 mm / 800 mm Workpiece thickness min/max: 10 mm / 60 mm MACHINE DETAILS Control system: Powercontrol PC85T with Woodwop software Dowels: 8 mm x 30 mm, 8 mm x 35 mm Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Drilling unit: 1 drilling and dowel insertion unit, freely programmable Ksdpfx Afezhm Sgjkedr Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical clamping cylinders Double diaphragm pump 1:1

Condition: used, machine/vehicle number: 008557, X axis working area: 3050 mm Y axis working area: 850 mm Kedpfxozcbhge Afkjdr Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Kodpfjwuckhjx Afkedr Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Kedpovz A E Tsfx Afkedr

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Kdsdpfjznbgrex Afkjr Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Kdedpjyy U S Ijfx Afkor Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3820, operating hours: 13,696 h, Workpiece length X: 200-3050 mm including roller conveyor Workpiece width Y: 50-1250 mm Workpiece thickness Z: 8 - 80 mm Vector speed: X/Y = 50 m/min; Z = 15 m/min Equipment: VERTICAL BORING UNIT V 15 HIGH SPEED including quick-change system and spindle clamping HORIZONTAL BORING UNIT WITH 6 SPINDLES IN X DIRECTION HORIZONTAL BORING UNIT WITH 4 SPINDLES IN Y DIRECTION NUT SAW IN X/Y DIRECTION 90° PLAUSIBILITY CHECK (X/Y) TOOL CHANGING SPINDLE 9 KW including converter 4-POSITION PICK-UP CHANGER, side-mounted POSITIONING CYLINDER for workpiece positioning WORKPIECE CLAMPING SYSTEM WORKPIECE HANDLING MACHINE CONTROL: POWERCONTROL with Powertouch MACHINE OPERATION: POWERCONTROL SOFTWARE: WOODWOP; TOOL DATABASE; MACHINE DATA ACQUISITION; PRODUCTION LIST SOFTWARE; OFFICE PACKAGE; WOODWOP DXF IMPORT BASIC; WOODASSEMBLER; 3D SIMULATION Operating voltage: 400 VOLT; Frequency: 50 HZ Energy-saving function Kdodszlbwfspfx Afksr

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Kodpfx Aoyxn Tiefkodr Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Safety cabin (enclosure) of the working head Kedjziapbjpfx Afkedr Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Kedpsyywcvofx Afkedr Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Condition: Well-maintained (training machine) Equipment: Milling unit 5 kW Tool holder, cylindrical, 25 mm with hook spanner clamping Drilling unit 1.5 kW with 19 spindles Crosshead with 4 drilling spindles Saw unit can be swiveled from X to Y. Kjdpfxsxqihcj Afksdr Light barriers in the front area New PC in 2015 Operating system: Windows 98 Weeke software: Woodwop 4.0 Technical data: Travel range X: 3455 mm Travel range Y: 1480 mm Travel range Z: 260 mm External dimensions: Length: approx. 6115 mm Depth: approx. 3660 mm Location: Röllbach Availability: short-term

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Kdedpfx Ajzmmt Iofkjr Max. panel length: 2500 mm No of Bottom Units: 8 Lateral horizontal groups: yes