Used Vertical Machine Center for sale (71,429)

Condition: like new (used), Mazak VCN-530C 4 Axis VMC Year 2020, Smooth Control, Kitagawa 4th Axis with 300mm face plate 1300mm x 550mm table, 1050mm x 510mm x 510mm travels, Njdpfszil A Hsx Aqwslf 12,000rpm spindle, Renishaw probing,

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Din 40 spindle taper, Nodpfx Aszcy Ireqwjlf 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: good (used), Year of construction: 2014, Traverses XYZ; 1020 x 830 x 245 mm, Table size 1000 x 700mm., spindle taper HSK-E25, Nljdpfxjzcwk Re Aqwsf 5 station ATC, , Datron software

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. B axis +/- 120 degrees, C axis 370 degrees, Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63. Nledpfx Aqjzcv T Dowsf

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Nsdszv Tlvjpfx Aqwolf Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Condition: used, Year of construction: 2007, Travel X/Y/Z: 600mm/400mm/460mm, spindle-to-table distance: 200mm-660mm, table size X/Y: 700mm/410mm, max. table load: 250kg, rapid traverse X/Y: 72m/min, rapid traverse Z: 60m/min, max. spindle speed: 12000rpm, spindle power: 7.5kW, tool taper: BT40, tool magazine: 24+1, max. tool diameter: 80mm, max. tool length: 250mm, tool change time: 1.6s, control: Mitsubishi M64S, through-spindle coolant: 20bar, probing system: Renishaw, machine weight: approx. 4300kg. Including a tool cabinet with approx. 100 tool holders. Inspection possible by arrangement. Nljdpfozu Sz Hjx Aqwsf

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: WEMAS GmbH Type: BZ 500 Year of manufacture: 2015 Control system: FANUC Series 0i-MD Connected load: 22 kVA Operating voltage: 400 V Weight: approx. 8,280 kg Equipment: Pallet changer Nedpfx Aqszi Hdljwslf The machine was primarily used for aluminum processing and is very well suited for this purpose. According to our current knowledge, the machine is generally in operating condition. There is currently a malfunction in the pallet changer, which is likely due to a defective sensor. Therefore, the pallet changer is currently not reliably usable. According to our current knowledge, all other machine functions are operational. The machine is currently powered on and can be inspected after prior appointment.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Spinner MCV 610, Year of manufacture: 2007, Control system: Siemens Sinumerik 840 D, Travel range X/Y/Z: 610/500/500 mm, Spindle speed: up to 10,000 rpm, Spindle taper: SK 40, Tool changer: 24 positions, Table size: 1000 x 600 mm. Nljdpjzt Iuyjfx Aqwjf

Condition: used, Year of construction: 2011, operating hours: 19,500 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, controller model: Siemens 840D SL, overall weight: 34,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, spindle nose: SK 50, number of slots in tool magazine: 320, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Universal Machining Center REIDEN BFR 24 – 4000 mm – TOP Configuration For sale is a high-precision 5-axis universal machining center REIDEN BFR 24 from 2011, in very good condition. The machine comes from industrial production and is ideally suited for machining large and complex workpieces in machine, tool, and mold making. Due to its robust design and high-quality Swiss manufacturing, the REIDEN BFR series offers the highest precision, stability, and reliability. ⚙️ Technical Data Manufacturer: REIDEN (Switzerland) Type: BFR 24 Year of construction: 2011 Control: Siemens 840D sl Axes: 6 (simultaneous machining possible) Travel distances: X: 4000 mm Y: 1000 mm Z: 1200 mm B-axis: ±120° C-axis: 360° Spindle: Mount: SK50 Power: 45 kW Speed: up to 7,000 rpm 🧰 Equipment / Accessories ✅ Tool magazine with 320 positions ✅ approx. 500 SK50 tool holders (!!) ✅ Pallet changer with 3 pallets ✅ Internal coolant system 70 bar ✅ Measuring probe Blum ✅ Stationary table 1600 x 2350 mm ✅ Magnetic/vacuum clamping plate 1050 x 2240 mm ✅ Chip conveyor ✅ various hydraulic lines, renewed in 2023 🚚 Other Machine can be inspected while powered on Machine is available from January 1, 2027 Important conditions: Please note that the sale of this machine is only possible under the following conditions: Nodozhnl Uepfx Aqwelf • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase contract (legally required) Sales / Transfer conditions: • Dismantling, removal, and transportation are the responsibility of the buyer and at his risk. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your response in order to coordinate the further details directly.

Condition: ready for operation (used), Mori Seiki MV-Junior vertical machining center... Tool magazine for 30 tools, travel X: 560 mm; Y: 410 mm; Z: 460 mm, table size: 900x450 mm, maximum table load: 300 kg, maximum spindle speed: 8,000 rpm, total weight: 3,900 kg Nlsdpfx Aex I D Syoqwof

Condition: good (used), Year of construction: 2004, Vertical machining center, Mazak VCN-510C, manufactured in 2004. Nledpfx Aozcu D Uoqwef

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Nljdpey Idpxjfx Aqwsf

Condition: good (used), Year of construction: 2020, Hartford vertical machining center, model MVP-11, year 2020, with Hartrol Premium I control. Njdpfx Aqjzq A Hfewolf

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Nljdpfxezcu Ims Aqwef

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Nedpjzqgh Hofx Aqwelf Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2016, operating hours: 9,656 h, functionality: fully functional, machine/vehicle number: H10327, travel distance X-axis: 1,020 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, torque: 89 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, overall weight: 9,100 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 9,462 h, coolant supply: 30 bar, spindle motor power: 14,000 W, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, For sale is a Takumi H10 CNC milling machine from the year 2016. The machine is in good used condition and has been regularly used in production. Equipped with a Heidenhain iTNC 530 control, an HSK-A63 spindle with 15,000 rpm, and a 30-position tool changer, the machine is ideal for precise machining and, in particular, for tool and mold making. The machine also features internal coolant (IKZ) and a Renishaw measuring probe. Technical data: Nedpfeztz Aqjx Aqwolf Manufacturer: Takumi Model: H10 Year of manufacture: 2016 Control: Heidenhain iTNC 530 Spindle speed: up to 15,000 rpm Tool holder: HSK-A63 Tool changer: 30 positions Internal coolant (IKZ): included Measuring probe: Renishaw Operating hours: approx. 9,656 h Weight: approx. 9.1 t Condition: good, with corresponding signs of use Location & loading The machine is located in Bad Lippspringe and can be inspected by appointment. Loading on-site is possible. An inspection before purchase is strongly recommended. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Nodpszuwxqsfx Aqwolf

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Njdpfezair Ujx Aqwjlf Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: good (used), Year of construction: 1990, functionality: unexamined, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Type: AJV25/404 Mazak with 2 work tables and 3 machine vises, as well as accessories, including 1 T-slot table, 1 additional machine vise, 1 chip conveyor, and 1 tool changer with 30 tools. Year of manufacture: 1990 Technical data: X-axis travel: 1000 mm Y-axis travel: 508 mm Z-axis travel: 460 mm Rapid traverse rate: x/y-axis: 24 m/min z-axis: 18 m/min Control system: Mazatrol M-32 Table length (clamping surface): 550 x 1240 mm Nljdpszq Hw Uefx Aqwof Table width: 410 mm Workpiece weight: 300 kg Tool changer capacity: 40 Spindle taper: CAT 40 Max. working spindle torque: 263 Nm Max. spindle speed: 28 – 4000 rpm Spindle motor power: 15 kW Length x Width x Height: 5400.0 x 2900.0 x 3000.0 Weight: 8600 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Nljdpfx Aozq Hwnsqwof Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. Nlodpfx Aqeibat Ijwef The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in June 2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. Furthermore, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Njdpfx Aozp Iz Eoqwslf Manufacturing date: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color screen Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Form A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Alignment screws and shims CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connection power: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller model: FANUC Series 160is-MB, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges Nedpfxozpxgrs Aqwslf X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm A-axis: -120 to +30° C-axis: 360° Spindle Speed range: 100 to 12,000 rpm Speed stages: stepless Spindle mount: 7/24 taper, size 40 Spindle bearing inner diameter: 65 mm Distances Distance from table surface to spindle nose: 70 to 530 mm Distance from column front to spindle center: 620 mm Table Work surface diameter: 350 mm Maximum workpiece weight: 200 kg Height of table surface above floor: 1,080 mm Feed rate Rapid traverse X- and Y-axis: 48 m/min Rapid traverse Z-axis: 36 m/min Rapid traverse A-axis: 22.2 rpm Rapid traverse C-axis: 33.3 rpm Working feed rate X, Y, and Z-axis: 1 to 36,000 mm/min Working feed rate A-axis: 22.2 rpm Working feed rate C-axis: 33.3 rpm Tool changer Tool mount: JIS B 6339 BT40 Pull stud: MAS 403 P40T-1 Tool magazine: 20 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent positions occupied: 82 mm Max. tool length from reference line: 300 mm Max. tool weight: 7 kg Tool change time, chip-to-chip: 1.2 s Tool change time, cut-to-cut: 3.8 s MACHINE DETAILS Control model: FANUC Series 160iS-MB

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1119, travel distance X-axis: 1,100 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 8,000 rpm Rapid traverse rate, X/Y/Z-axis: 18 / 18 / 15 m/min Table area: 1,200 × 600 mm Workpiece weight, max.: 1,000 kg Spindle connection: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Control system: Siemens 840D SL ShopMill Coolant pressure through the spindle: 20 bar Connection power: 400 V, 50/60 Hz Current: 50 A Dimensions & Weight Footprint: approx. 3,000 × 2,350 mm Machine weight: approx. 8,000 kg EQUIPMENT Nodpozpw Egefx Aqwslf ShopMill Preparation for 4th axis

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in the X-axis: 1,200 mm Travel in the Y-axis: 700 mm Travel in the Z-axis: 750 mm Spindle speed: 8,000 rpm MACHINE DETAILS Control model: Heidenhain TNC 530 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Nodpozpwykofx Aqwelf Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Control on-time: 17,705 h