Vertical machining center

DMG MORI 1035v ecomill

Condition: ready for operation (used), Year of construction: 2010, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens 810D / ShopMill, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 10,000 rpm Table width: 560 mm Table length: 1,200 mm Number of tool magazine positions: 20 MACHINE DETAILS Control system model: Siemens 810D / ShopMill Control cabinet cooling: Rittal SK 33023.100 Spindle operating hours: 11,000 h Total operating hours: 33,600 h Lodpfjzqfv Ajx Aklshl EQUIPMENT Internal coolant supply (ICS) Chip conveyor

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created Ljdpfx Akeziz S Delehl • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: 620, total height: 2,670 mm, total width: 3,110 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,650 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, product length (max.): 3,370 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 1035V was manufactured in 2015. It features impressive travels of 1035 mm in X, 560 mm in Y, and 510 mm in Z. The machine has a maximum spindle speed of 12,000 rpm and a robust table size of 1200 x 560 mm, with a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 1035V vertical machining centre we have for sale. Contact us for further details. • Operating hours: 42,440 h (power on) / 17,741 h (spindle cutting) • Table size (L x W): 1200 x 560 mm • Machine working footprint (approx.): 6.3 x 4.55 x 2.808 m Lhjdpfx Aszmgcisklel • Machine weight (base machine): 4650 kg • Transport dimensions (L x W x H): machine 3.37 x 3.11 x 2.67 m • Notes: New spindle Additional equipment • Chip conveyor • Weight: 505 kg • Transport dimensions: 3.90 x 0.99 x 1.73 m • Internal cooling unit • Weight: 300 kg • Transport dimensions: 1.835 x 1.10 x 1.326 m • Renishaw probe • OTS tool measurement • Vises (approx. 150 kg total) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge Lsdpfx Aozcpu Ijkljhl * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec Lhedpfx Akozqzznjljl • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L