max. workpiece diameter 25 mm
workpiece length - max. 400 mm
- - -
SCHUSTER MLTS Centering Machine
The machine is in a good condition.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags:
Vsytky
5
workpiece diameter - max.: 140 mm
2rf9ri
workpiece length: mm
spindle speed:: 56 - 355 U/min
wall strength: Vollmaterial mm
centre height: 180 mm
total power requirement: ca. 12,0 kW
weight of the machine ca.: 2,17 t
dimension machine xH: 2,6 x 1,2 x 1,7 m
Cut-off lathe and end machining machine / Thread cutting machine
technical information:
- Workpiece length to be machined = as required
- The workpiece is clamped by means of prism clamping jaws, clamping Ø approx. 140mm, motor-clamped.
- Oper...
6
min. workpiece diameter 10 mm
workpiece length 2000 mm
max. workpiece diameter 120 mm
Control
total power requirement 22 kW
weight of the machine ca. 4,5 t
Dwkl3e
dimensions of the machine ca. 3,8x 1,7 x 1,80 m
1
max. workpiece diameter 80 mm
min. workpiece diameter 15 mm
workpiece length 2000 mm
total power requirement 1 kW
weight of the machine ca. 0,5 t
Jicovwj
dimensions of the machine ca. 0,8 x 0,5 x 1,0 m
Brush deburring machine for pipe endings.
7
workpiece length 30 - 600 mm
workpiece dia. 6 - 60 mm
2rgovu
face diameter max. 50 mm
core boring - depth 50 mm
forward feed of working head 55 mm
feed speeds max. 4000 mm/min
rapid speed 6 m/min
fine feed 10 mm/min
spindle turning speed range 700 / 1400 U/min
drive motor 3,7 kW
weight of the machine ca. 280 kg
dimensions of the machine ca. 1,10 x 0,50 x 2,00 m
5
max. workpiece diameter 50 mm
min. workpiece diameter 10 mm
workpiece length 30 - 600 mm
clamping diameter 6-60 mm
clamping capacity 1200 kp
face diameter max. 50 mm Tiefe
core boring 50 mm
Overwind to 30 mm
total power requirement 2,4/3,7 kW
weight of the machine ca. 360 kg
dimensions of the machine ca. 0,9 x 0,6 x 2 m
Electric 380 Volt
Machine manual
Sdnuullh
REDUCED PRICE!The year of construction is estimated.
Machine dealer with own stock of 2500 m².
8
max. workpiece diameter 155 mm
workpiece length 900 mm
stroke 90 mm
total power requirement kW
Vwugxotz
weight of the machine ca. t
dimensions of the machine ca. m
6
workpiece diameter - max.: 8 - 50 mm
workpiece length: 5 - 500 mm
spindle speed:: 100 - 1000 U/min
workpiece diameter - max.: Ø 50 / Vollmaterial mm
workpiece diameter - min.: Ø 8 / Vollmaterial mm
workpiece diameter - max.: Ø 70 / Rohr mm
workpiece diameter - min.: Ø 8 / Rohr mm
wall strength: 1 - 10 mm
centre height: 300 mm
spindle hollow: Ø 90 mm
cut-off length with swivable stop min/max.: 5 - 500 mm
total power requirement: ca. 16,0 kW
weight of the machine ca.: Anfrage t
dimension machine x...
4
max. workpiece diameter 200 mm
min. workpiece diameter 30 mm
total power requirement kW
Vso7fy
weight of the machine ca. t
dimensions of the machine ca. m
6
Max. working length 1000 mm
Min. working length 60 mm
Max. workpiece diameter of the column 110 mm
Max. Bore diameter 20 mm
Peh2v2z2
drilling stroke 75 mm
Weight approx. 4200 kg
8
Max Diameter Milling with 10" Cutters 8".Max Diameter Milling with 8" Cutters 6.25". Max Diameter Milling with 6" Cutters 3.5".Minimum Diameter Clamping 1/2". Maximum Workpiece Length (10" Cutters) 138". Min Workpiece Length (6" Cutters) 4.5". Milling Spindle Speeds (Thru Pick Off Gears) 42-290 rpm. Size of Taper in Milling Spindles 50 INT. Rapid Traverse Rate of Milling Heads 100"/min. Feed Rate of Milling Heads (Infinitely Variable) 0-100"/min. Maximum Material Removed at Each End .5" Dril...
8
Double sided hydraulic centering machine make MACHINTEST TOVAGLIERI sro
Type M 25, Masch.# M256 Year of construction 1977
Technical data:
Centre height 125 mm
Center distance 1500 mm
Chuck diameter 125 mm
External dimensions L x W x H 4700 x 1300 x 1600 mm
Weight approx. 4-4.5 t
with
- Cooling device
- Cycle
- Cutters
- Turning out rear/front
- front double cut / back
- Chip conveyor
- separate hydraulics
used, in need of repair, for reconstruction/ overhaul
SPECIAL PRICE ex stock
Mu2h0c
3
100 $
Auction finished
Modern Machine Tool Company, cut off tubing machine, model 2LD, with Allen Bradley Communication display, has dry type transformer, .500 KVA, primary voltage of 24480, secondary of 12240, also includes (1) Modern Machine Tool Company, model 2LD, bar stock feeder table, approx. 30' length x 80" width, unit comes with manual, single spindle lathe type, S/N 2LD2341, in working condition, winning bidder responsible for proper removal and disconnect of unit.
Ewcanhp
Online Auction: Wednesday, Januar...
1
Duberring machine for small tubes
Dwmd3kzw0
7
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Bgwdgynkma
Für weitere Fragen stehen wir Ihne...
6
15X DRILL MACHINE Atlas Copco Ingersoll Rand Furukawa Sandvik Tamrock Stocknr.: BN1210 ALSO 10X DRILLING INSTALLATION WATER DRILLS AND 5X ANCHORING MACHINE 15X DRILL MACHINE Atlas Copco Ingersoll Rand Furukawa Sandvik Tamrock Stocknr: BN1210 ALSO 10X DRILLING INSTALLATION WATER DRILLS AND 5X ANCHORING MACHINE
Bqzhpeccyf
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Zthyl0f7
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
13
Modular drilling and milling machine GOMAD Automatic Drilling Machine AWL 2G-6B-2C
Automatic drilling machine AWL 2G-6B-2C
Automatic Drilling Machine, Modular Drilling Machine GOMAD AWL 2G-6B-2C
Type / Model: AWL 2G-6B-2C
Production Year: 2008
Bp7790l3bi
Technical condition: Good
Technical description:
The AWL-2G-6B-2C drilling machine is designed to make holes for pegs and handles in wooden strips, chipboards or wood-like material. It has 2 upper, 6 side and 2 front units, a material feeder an...
6
Eyeletting machine for advertising banners
The device is in perfect condition, ready for work.
Technical data:
1 head
laser indicator
Foot pedal operated
Pu3owi
14
OMRON CPM1A control, 4 stations.
Target machine for assembling and compressing door glass modules.
Price is a net target price, a matter of final price agreement
Purchase, acquisition, asset management of industrial equipment and machinery.
Gc9xq2pzc
Wide range of used machinery, industrial equipment
15
Machine for peeling onions
Bkvxbvftpd
Technical parameters:
- manufacturer: GOLDEN MACHINE
- machine type: 2-row
- capacity: approx. 0.4 - 0.6 tons / h
- year of production: 2018
Condition: used, operational
Machine location: 33-340 Stary Sącz, Poland
6
Drum sieve Brand: The Screen Machine Type: Achiever Year of construction 2012 Engine: 4 cylinder Cummins Turbo Hours on display: 966 Stocknr.: BN1284 Trailed version ABS Air braked Leaf sprung 3 meter dump bunker with fingers Addition bunker Removable discharge conveyor approximately 9 meters long Drum 3 meter drum meshes 65x65 Diameter drum 153 Tires 435-50-16.5 90% Drum sieve Brand: The Screen Machine Type: Achiever Year of construction 2012 Engine: 4 cylinder Cummins Turbo Hours on display: 9...
15
Bed size 880 x 630 mm
Outer edge seal 950 x 700
Inside edge seal 880 x 630
Double heater
6 heat settings for the top heater
Ojdgl
1 setting for the bottom heater
Vacuum pump included
Vacuum tanks included
Top air ramp for blowing domes
6
MILLING MACHINE FOR ALUMINIUM pillars RINALDI LILIPUT 9M FS
Lnsin
10
3-head riveting machine for files
Perfect condition, practically unused.
Production Germany.
Operation via the control panel, cycle counter.
The machine is used for crimping all kinds of ring mechanisms, clips, etc.
Three riveting heads, with adjustable spacing and the possibility of activating each head separately from the control panel.
Cardboard thickness 0.5-4mm
Opxw9
Spacing of heads: 45-365mm
Weight 500 kg
380V power supply
4
Main axis diameter 110 mm
Cone ISO Nº50
Main axis axia stroke 800 mm
Maximum height of the center main axis above table 1800 mm
Minimum height of the center main axis above table 0 mm
Maximum boring diameter 600mm
21main shaft speeds (motor a 1440 rpm) 7 a 1000 rpm
Table Cross travel 2000mm
Longitudinal travel of the table with steady 2000mm
Longitudinal travel of the table without steady 2400 mm
Useful Surface of the rotary table 1260x1530 mm
Max. distance between main axis and steady 2450...
6
Manual or NC downfeed control
Working area X/Y/Z 300/600/500 mm, grinding wheel Ø 355 mm,
motor 3,7 KW, speed 1750 rpm., dimension 3100x1900x2200 mm,
weight ca. 2200 kg, digital read out, compl. hausing, 4 wheel flanges,
instruction manual, Installation pads; run only with oil.
with magnetic chuck + coolant system
G0szoun
2
ITALPACK packing machine with its accessories
Puwpvy
MASPACK/TOSA end line wrapping system with its accessories.
The machine is as good as new as it worked for only 3 months.
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
Bnlwiwyfgv
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
2
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- Shield Ø...
7
DMG Vertical Machine Center
DMC 835V
Year 2008
Travel X835 Y510 Z 510mm
Spindle 10,000rpm
ATC 20 magazine
Heidenhain iTNC-530 3D DMG ERGOLine – Control
Bt40 Spindle Taper
Coolant – Air Blast Changeover by M-Code
Spray Gun for swarf Removal
Electronic Hand-wheel
Bexr77si
Active Chiller for Spindle
12
7
Roller mill W12-25x3000, 4 - roller, with NC control - reading on all axes, desktop control, colour touch screen; year of manufacture 2015, power 45kW, weight -22 tons
bent plate thickness 25mm
width of bent plate 3000mm
Hbub7zxc
the machine has worked very little and has not been used for 2 years
3
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
Pui0yq
Specification
Europa VS660
Centre height 330mm
Distance between centres 1500mm
Swing over bed 660mm
Swing over cross slide 430mm
Spindle bore (max. bar dia) 104mm
Spindle nose mounting D1-11 Camlock
Taper in spindle bore No. 7 Morse
Swing in gap 860mm
Width of bedways 480mm
Total travel of cross sl...
FERMAT machine tool, s.r.o., Prague / Czech Republic
Universal cylindrical grinding machines BHC 63 CNC with cast iron bed * max loop length of 6,000 mm * swing up to 1,000 mm * workpiece weights up to 5,000 kg (with Bezel)-general product description
Machine base made of cast iron
Machines are with control Siemens 840 d sl (828 D sl) or B + R delivered power Panel 900.
Remote Diagnostics free to current warranty and beyond!
CNC Schleifscheibe Abrichtung
Reference visits throughout Germany poss...
3
Single head saw for steel, metal, (blade Ø 315x2.5x32 mm)
APPLICATION:
For cutting metal profiles
FUNCTIONS:
- Robust spring system, safe cutting
- Cuts to any angle between 45° and 90°
- Hand clamps
- Possibility to prevent the blade from heating up and remove swarf by cutting with coolant
The price given is the net price.
Dgyu3yas3
12-month warranty
EXW. Obodovo, Sośno, Poland
The price offer presented is for informational purposes and does not constitute a commercial offer within the meaning ...
12
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
Bnxo2cb
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
8
FOD Milling and copling machine. DFPA 40 horizontal profile milling machine
Manufacturer FOD
Model / type of machine. Horizontal profile milling machine DFPA 40
Year of production 1989
Category of machines. Milling and copier
Location
Gorzów Wlkp.
Conditions of delivery
own collection
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
Destiny:
The DFPA 40 horizontal milling machine is a universal machine tool with a wide range of applications in the furniture and ...
SEMIAUTOMATIC BOOK COVER POSITION MACHINE
LJ308A
Bhhx2keocu
-new machine
3
Table surface 1000 x 280 mm; x- approx 500 mm; y- approx 240 mm; z- approx 500 mm;
feeds and rapid traverse on X and Y; n vertical head= 90-2000 1/min; ISO 40 holder; quill travel 120 mm; motor 400 Volt; 2,2 KW; weight= approx. 1150 kg.
Upper beam horizontally adjustable and rotatable; vertical head swivels, 2 sides
G7bfuc3nu
Chip protection and safety cover, halogen lamp, central lubrication; chip tray;
Combination milling cutter holders; Drill chuck holders; Cutter head with holder; Clamping
G...
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
FERMAT HORIZONTAL TABLE DRILLING AND MILLING PLANT - WRFT 130/150/160 CNC *** X: 2.400 mm to 9.500 mm *** Y: 2000 to 6.000 mm and spindle diameter up to 160 mm
The horizontal bench-type boring and milling machine WRFT 130/150/160 CNC offers a new, conceptual machine solution among the large bench-type boring mills with an efficient and powerful headstock. This in turn consists of an extendable stick (travel V) and an extendable spindle (travel ...
7
Sweeper applied 414 RS, year 2011, B-92601, 2733 operating hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width mm 1140, forward and reverse, Push broom is missing and 1 cover, scratched 1 broom plate trim panel and eigerissen, sidelights defective
Ceyw0p8y
7
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Diameter bucket top 285 mm
Diameter bucket bottom 272 mm
Noyit
Production capacity approx. 50 pieces/min
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
If necessary, a complete assembly and commissioning can be offered to the buyer!!!
6
milling machine for arches
swiveling milling spindle machine
Wucxmcy3c
It has for the transport of feed is used for milling
arc elements
Special machines
1
Can be used for filling oil and varnish.
Cueopz3k
7
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
FERMAT Machine Tool, s.r.o., Praha / Czech Republic
HORIZONTAL PANEL BORING AND MILLING MACHINE - WRF 130/150/160 CNC
to X: 30,000 mm *** Y: 6,000 mm and spindle diameter up to 160 mm
The horizontal CNC boring and milling machine WRF 130/150/160 represents new structural concepts of horizontal panel boring mills on the market. The powerful headstock consists of an extendable stick (travel V) and an extendable spindle (travel W). The WRF boring mills make it possible to achieve extremely high eff...