Used Cnc Vertical Turning Machine for sale (85,217)

Condition: used, Year of construction: 2012, Model Year: 2012 Width: 1,050 mm Length: 515 mm Ihsdpjx Tuddjfx Ag Uot Height: 600 mm Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Serial No.: 2219, Control unit manufacturer: Siemens, Model: Sinumerik 840D sl, 2 spindles, spindle distance: 210 mm, max. speed approx. 4000 rpm, W-axis tool spindle / grinding spindle: 2000 rpm, max. workpiece diameter: 100 mm, max. workpiece height: 40 mm, 8-position tool turret by Sauter, Model: 0.5.480.516, tool holder: Capto C5, workpiece automation device by DVS, Type: Moduline, transfer robot by Epson, PLC system control by Siemens, Simatic Panel Touch display, coolant system by Knoll, Type: KF150/950, paper band filter, chip conveyor by Knoll, Type: 225S-2/170. +++ Note: Machine is part of an online auction! +++ Iodpfex Ahg Uox Ag Ueht

Condition: ready for operation (used), Swing diameter over bed/cross slide: 800mm/500mm, max. turning diameter: 590mm, max. turning length: 650mm, spindle power: 30kW, speed: 2500rpm, bore: 105mm, bearing: 160mm, travel X/Z: 300mm/670mm, rapid traverse X/Z: 12m/min/16m/min, tool positions: 8. Machine dimensions X/Y/Z: approx. 1850mm/2700mm/3100mm, weight: approx. 8500kg, control: Fanuc. Dokumentation vorhanden. An on-site inspection is possible. Ijdpfsxyk T Sex Ag Ueht

Condition: used, Year of construction: 1993, turning diameter ca. 500 mm swing diameter ca. 600 mm travel -x axis ca. 400 mm travel -z axis ca. 600 mm spindle turning speed range 2000 U/min spindle drive 63 kW control SIEMENS control SINUMERIK System 3 tool turret 1 x 12 Pos total power requirement kW weight of the machine ca. 9,3 t dimensions of the machine ca. m - R-version, turret right hand side of 3-jaw chuck - Ihsdpfx Agotyp Suj Ust Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Ihjdpjvva Hkefx Ag Ujt

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Ihodpfx Aeubyy Nsg Uet

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible. Ijdpfx Aevpvinjg Usht

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een beweegbare portaalconstructie voor snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en voorbewerken van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - Draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op de tafel - Maximaal koppel op de tafel: 1500 Nm - Maximale snelheid van de tafel: 800 rpm!! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities, waarvan 24 voor draaien. Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op de spindel - maximaal koppel op de spindel: 18 / 16 Nm - maximaal 40.000 toeren per minuut - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met opties die op de machine zijn gemonteerd: 1 - Hogesnelheidsspindel met 40.000 tpm 2 - tafeldiameter 700 mm met hydraulische klemming 3-150-positie gereedschapswisselaar 4 - spanentransportband 5 - koelsysteem met terugwinning 6 - regeling van de koelvloeistoftemperatuur 7 - hogedrukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - doos voor het verzamelen van chips 10 - Voorinstelsysteem en gereedschapsintegriteit: laser- en mechanische meetsonde voor meetinstrumenten 11 - Renishaw-sonde Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Ijdpfx Aextgkaog Usht Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: ready for operation (used), chuck outer diameter: 1,200 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Ihedpfxoxqh R Ne Ag Ust Qty Tools: 24 Coolant pump: yes Light: yes

Condition: ready for operation (used), chuck outer diameter: 1,600 mm, controller model: E.C.S CNC 2600, Mario Carnaghi TG10/1600 - Ø 1700 mm CNC Max turningdia -- passage: 1700 mm Power on the spindle: 70 kW Max longitudinal travel X-axis: 1965 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 3.5 - 300 rpm TOOLING: yes Turret: yes Isdexqh R Aepfx Ag Uoht Qty Tools: 12 Coolant pump: yes Light: yes

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm maximaal gewicht op tafel: 300 ton rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 tpm Vaste externe kolom: ramafmetingen: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel maximale hoogte van uitwendig draaien/frezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slag: 8000 mm horizontale slag: 2030 mm Beweegbare binnenkolom: RAM-formaat: 280 x 280 mm max. diameter van inwendig draaien/frezen: 5180 mm min. diameter van inwendig draaien/frezen: 3048 mm max. hoogte van inwendig draaien/frezen: 5800 mm Iedpexqh Stofx Ag Usht min. hoogte van inwendig draaien/frezen: 615 mm verticale slag: 5800 mm horizontale slag: 1120 mm Spiltoerentallen: 1,2 601 tpm Totaal vermogen: 250 kW 5-assige CNC-besturing

Condition: ready for operation (used), chuck outer diameter: 1,120 mm, total height: 4,100 mm, empty load weight: 16,500 kg, Type: Stanko 1512 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale verplaatsing: 775 mm maximale verticale verplaatsing: 700 mm Ihsdpfx Agjxp Slbs Ust Horizontale schuifmaat maximale horizontale verplaatsing: 630 mm maximale verticale verplaatsing: 1000 mm Dwarsbalk maximale slag: 660 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long: 2750 mm Wide: 2975 mm

Condition: ready for operation (used), chuck outer diameter: 3,200 mm, total height: 7,155 mm, controller model: Siemens 840D, empty load weight: 65,000 kg, Type: SKD 32B Siemens 840D CNC-besturing 2017 Tafeldiameter: 3200 mm Maximale zwenkhoek: 3500 mm Maximale belasting op tafel: 50 ton Hydrostatische tafel!! Vermogen op tafel: 120 kW Torsiesterkte: 132 Kn 2 variabele snelheidsversnellingsbak: ,8 80 tpm Verticale verplaatsing van de dwarsbalk: 2100 mm Maximale werkstukhoogte: 2550 mm Ihodpfov Rwh Iox Ag Uet 2 gereedschapskoppen op dwarsbalk CNC gestuurd - horizontale beweging van gereedschapskop nr. 1: 1400 mm - verticale beweging van gereedschapskop nr. 1: 1500 mm - horizontale beweging van gereedschapskop nr. 2: 1980 mm - verticale beweging van gereedschapskop nr. 2: 1350 mm - rotatiehoek van de gereedschapskop: -/+ 30° Max turningdia -- passage: 3500 mm Power on the spindle: 120 kW Number of speeds: 1 > rpm / > 80 rpm Power needed: 195 kVa Long: 10045 mm Wide: 8120 mm

Condition: ready for operation (used), chuck outer diameter: 3,000 mm, empty load weight: 48,000 kg, Type: SC 33 - Morando-licentie Tafeldiameter: 3000 mm Maximale zwenkhoek: 3300 mm Maximale werkstukhoogte: 2300 mm Maximale belasting op tafel: 18 ton Vermogen op tafel: 60 kW Tafelsnelheid: 1,02 92 tpm 1e VERTICALE STEUN Ramsectie: 236 x 230 mm Verticale beweging van de steun: 1500 mm 2d VERTICALE STEUN met torentje - 5 posities Verticale beweging van de steun: 1000 mm Ihsdov Sfrqspfx Ag Ust Max turningdia -- passage: 3300 mm Power on the spindle: 60 kW Digital screen: Axom Evolution 3 Number of speeds: 1,02 > 92 rpm

Condition: ready for operation (used), Schiess 32 DZ Type: 32DZ 300/350-325/160 Ijdov Sfnxopfx Ag Usht De Schiess DZ-tafeldraaibank met twee staanders is geschikt voor alle soorten draaiwerk. Tafeldiameter: 3000 mm Maximale belasting: 44 ton Snelheid: 1 100 tpm Maximaal overdraagbaar koppel op de tafel: 10.000 kpm Snijkracht op de wagen: 5000 kp Vermogen: 75 kW CNC-besturing: BOSCH (Kogelomloopspindel) Heidenhain lineaire schaal Horizontale verplaatsing van de gereedschapshouder vanaf het midden van de tafel: 2510 mm Verticale verplaatsing van de dwarsbalk: 1600 mm Verticale slag van de gereedschapshouder: 1600 mm Gereedschapshouder kan 30° naar links en rechts kantelen Maximale hoogte van het werkstuk: 3420 mm Maximale diameter van het werkstuk: 4020 mm Gereedschapswisselaar met 12 gereedschapsposities

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Ijdpewaiuqefx Ag Uoht Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: ready for operation (used), Schiess 80 DF Type: 80 DF 700/900-550/280 Originele CNC-machine van Schiess (geen ombouw van conventioneel naar CNC) Volledig hydrostatische machine Gelaste kolom Siemens-motor Uitgerust met een controlelift om de bovenkant van het werkstuk te bekijken Machine met zeer hoge tolerantie Tafeldiameter: 7000 mm Maximale diameter van het werkstuk: 9000 mm Maximale belasting: 315 ton Snelheid: 0,25 25 tpm Maximaal rotatiekoppel: 63.000 kgm Maximale snijkracht met uitgeschoven ram tot 900 mm: 12.500 kg Gereedschapskop kan -40° tot +40° kantelen Ijdpfx Aev Rwdpeg Ujht Vermogen: 125 kW gewicht van de tafel: 71 ton Ramsectie: 380 x 380 mm Horizontale verplaatsing van de ram vanaf het midden van de tafel: 5640 mm Verticale slag van de ram: 2800 mm Maximale hoogte onder dwarsbalk: 5547 mm Horizontale verplaatsing van de dwarsbalk: 4700 mm Uitgerust met 3-positie automatische gereedschapswisselaar Totaalgewicht van de machine: 260 ton! Unieke eigenschap er zijn 3 mogelijke configuraties van de hoofdkolom: 1 - voor maximale zwenking 9000 mm (zoals momenteel ingesteld) 2 - voor max. zwenkbereik 10.500 mm 3 - voor maximale swing 13 100 mm Dit kan worden bereikt door de hoofdkolom opnieuw op het fundament te positioneren.

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, empty load weight: 20,000 kg, Type: Stanko 1516 Ijdpfxjv Sftze Ag Ueht Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale slag: 950 mm maximale verticale slag: 700 mm Horizontale schuifmaat maximale horizontale slag: 630 mm maximale verticale slag: 1000 mm Dwarsbalk maximale slag: 660 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long: 3170 mm Wide: 3030 mm

Year of construction: 2023, condition: new, We are exclusive agent and distributor for China top class machine tools with stocks and Maintenance team. Here is Shenyang SYMG slant bed CNC turning lathe HTC 50P. Product description: 1. High rigidity feed system: In order to compensate for the elongation of the lead screw caused by the rise of the working temperature, and ensure the positioning accuracy of the lead screw and the system rigidity of the ball screw when it is used, the lead screw is pre-tensioned and pre-tensioned according to a certain thermal elongation before assembly to eliminate the impact of temperature rise on the accuracy. 2. High rigidity servo tool rest: Adopt servo 12-position tool rest. The turret adopts servo-driven hydraulic locking mode, and the turret is silent, high speed, large torque and fast tool change. The locking cylinder inside the turret is matched with a precise concave and convex tooth positioner, which has high positioning accuracy for tool change, can convert the tool forward and backward, and can bear heavy cutting. 3. Slide rail configuration: HTC50 series optional sliding guide rail structure, higher rigidity, suitable for re-cutting, etc. Max. swing diameter 700/670/670mm Max.turning diamter ShaftΦ500/ DiscΦ550mm Max.swing diameter over slide 500mm Max.working length 1000/1500/2000mm Spindle hole diameter 104mm Spindle speed 35-3000 rpm Chuck diameter 12" X axis travel 320mm Z axis travel 1050/1550/2050mm 12 position turret. With FANUC system. Ihodoi Ewi Djpfx Ag Ujt This series SHENYANG CNC Slant bed lathe also with related types: HTC 40P, HTC40B, HTC 4050S, HTC 50E, HTC 50B, HTC 50P Just contact us if any further details are required.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Ihedpfxoxdmgvo Ag Uet Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Model Year: 2007 Width: 1100 mm Length: 410 mm Height: 640 mm Number of Axes: 3 Ijdpfx Agox Tt I Uj Uoht Tool Holder: BT50 Spindle Speed (rpm): 6,100 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2013, functionality: fully functional, spindle speed (min.): 3,000 rpm, feed length Y-axis: 500 mm, Year of manufacture: 2013 Chuck diameter: 10" Number of axes: 3 Length: 500 mm Ijdpfx Asx Nmuajg Ujht Swing diameter: 400 mm Spindle speed (rpm): 3000 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Isdpfx Aex I A Hpsg Usht Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Ihodjxwy S Eepfx Ag Uet Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Iedjx Uyd Sopfx Ag Usht Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm