Used Anchor Drill Rig for sale (32,510)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Kleljwtb Dwohccqrou ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19692 Specifications: - Model year: 2007 - Engine hours: 6060 hours - Hammer hours: 2496 hours - Weight: 14,900 kg - Machine width: 241 cm - Belt width: 30 cm - Central lubrication - Straight grinder - Chassis (see pictures) - Compressor - Wear parts included Kolhccovyf Nloqrolu - Hammer has been repacked every 400 hours - The engine has had an oil change and filter change every 250 hours - Carousel - Radio control - Winkelm gauge - Meter gauge - Diesel heater - Ready for delivery Description: We have for sale a 2007 Atlas Copco D7 Drilling Rig , which has been well maintained and is in working order. The machine comes with a significant stock of wear parts and filters, and the owner has carried out regular oil changes on the engine every 250 hours and on the hammer every 400 hours. The rig is a bit slow to start, but the owner lets it run with the diesel heater for 15-20 minutes before starting, and then it starts easily. The idler wheel on the left side is a bit worn and needs to be replaced, and there is also a need to replace some hoses on the vacuum cleaner. The rig is from 2007, so some errors and defects may occur, and some expense will be required to get it back in top condition. However, it is ready for delivery and use. Total Weight: 14900 Width: 241 CE: Yes

Year of construction: 1997, Condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Kolhccsl Tn Epsqrelu

Year of construction: 2023, Condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill pipe , 4000 mm x 85 mm , 2 7-8\" API Reg 02x Adapter shank 2 3-8\" API Reg Pin x 2 7-8\" API Reg Box 02x 140mm DTH drill bit Kslhccehypv Uoqrelu 02x 5\" DTH Hydraulic breaker with DHD350 shank, 2 7-8\" API More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, Year of construction: 2010, Field of application: Construction Serial number: 110M153xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19576 Specifications: - 2010 model - Hours: Approx. 2900 - Weight: 5200 kg - 62 kW - Tires (see pictures) - Winch - Radio control - Ready for delivery Description: Sandvik DC300R Drilling rig from 2010. Owner says he recently had it serviced. Ready for delivery. Hours: 2900 Kjlhcevyf I Iscqrslu Total Weight: 5200 Kw: 62

Year of construction: 2023, Condition: new, machine/vehicle number: 801694948, Boring rod + hydraulic hammer Kljlhccehypv Rjqrsu 8x 76mm DTH drill pipe , 4000mm x 63mm, 2 3-8\" API Reg 1x 3,5\" DTH Hammer with \" shank with 2 3-8\" API More Information Intended use: construction,

Condition: used, Year of construction: 2010, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Kljlhsvgy E Uoccqreu Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Total Weight: 8000 Kw: 55

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Width: 255 Klolhccqewph D Aerju Hammer hours: 3049 Engine hours: 5224

Condition: used, operating hours: 20 h, Fuel type: Diesel Intended use: Construction Power: 354 kW (481 hp) CE marking: yes General condition: very good Technical condition: very good Visual condition: very good Kolouu Df Dehccqrslu Damage: none

Condition: used, Year of construction: 2004, Field of application: Construction Kelhsvg Nt Isccqrslu Serial number: 04085xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000

Condition: used, New: No Field of application: Construction Kjlowphu Uehccqrjlu Please contact ATS Norway AS for more information Please provide reference number upon request: 20521 Specifications: Hours: Uncertain Chassis: See pictures Belt width: 30 cm Total width: 230 cm Vacuum cleaner Winch Deutz engine Maintenance is taken care of by owner Ready for delivery Width: 230

Condition: used, Year of construction: 2008, Field of application: Construction Serial number: AVO08A1388/8992 005xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20163 Specifications: - 2008 model - Engine hours: Approx 13000 - Impact hours: Approx 6500 hours - Weight: 15000 kg - Machine width: 241 cm - Track width: 30 cm - Meter counter - Angle gauge - 1838 Hammer - Stand changer - Carousel - Replaced screen - Replaced engine (unsure of hours) Kljlhccowdvg Uoqrou - Repacked cylinder on swing and tilt on tower - Service performed by owner - Undercarriage (see pictures) - Lights - Radio control - Ready for delivery Description: We have a 2008 Atlas Copco D7-01 Drilling rig w/ cop1838 hammer carousel and stand changer for sale. The engine and screen on the rig have been replaced. Some cylinders on the swing and tilt of the tower have also been repacked. The rig otherwise functions as it should according to the owner. Errors and defects may occur Ready for delivery. Hours: 13000 Own weight: 15000 Total Weight: 15000 Width: 241 Hammer hours: 6500 Model: D7-01

Year of construction: 2006, Condition: used, Field of application: Construction Serial number: AVO 06A1306 / 8992 003xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20607 Specifications: Model year: 2006 Hours: approximately 11,000 Weight: 15,700 kg Power: 159 kW Central lubrication Hammer: G tt approx. 530 hours after repacking Engine and chassis have been replaced Winch Vacuum cleaner Air conditioning / AC Optional accessories included: Rods and drill bits Grinding machine Case with measuring instruments Description:Atlas Copco Epiroc D7 drilling rig , model year 2006, with approx. 11,000 operating hours. The rig is in operation and works well. It comes with a number of useful accessories, including rods, drill bits, grinder and case with measuring instruments. Kslhcowphg Dscqrslu The hammer was repackaged and has only run approx. 530 hours since then. Originally delivered with a smaller engine, but this was later replaced with a more powerful variant by Epiroc. The chassis has also been replaced. Note: The belts don't move in high gear Rear view camera not working The machine is ready for delivery. See video for more information. Hours: 11000 Total Weight: 15700 Kw: 159

Condition: used, Year of construction: 2001, Field of application: Construction Serial number: DRI 0151xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20094 Specifications: Model year: 2001 Hours: 2421 hours Weight: 8630 kg Power: 63 kW Approximately 300 meters of poles Chassis: See pictures Cutter Kolhcsv U Sytecqrolu Video: Available Ready for delivery Notes: The machine has a broken clutch and is leaking oil. The rotation does not work on one side. Spare parts included Hours: 2421 Total Weight: 8630 Kw: 63

Year of construction: 2011, Condition: used, Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20555 Specifications: Kelhccowph Egeqrelu Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200

Year of construction: 2023, Condition: used, machine/vehicle number: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Increase your efficiency directly at the workplace: The TM Minibox is the smart, space-saving tool dispensing system for your production. Whether as an entry into digital tool management or as a supplement to your existing infrastructure – with the TM Minibox you take your production to the next level. Klelhccqjwpr Tnerou

Condition: used, Year of construction: 2011, operating hours: 9,515 h, Horizontal flushing - drill rig, rock drilling rig * Ditch Witch, * Type JT 3020 Jet Trac, * Year 2012, * 9515 hours read according to counter, * Drive via 4-cylinder Cummins diesel engine with 124 KW / 168 HP, * 2 speed levels, * Single cab with 1 seat, * Transport dimensions length x width x height 5600 x 2300 x 2450 mm, * Weight 12000 kg, * Crawler chassis with rubber track 10-15 mm, * Track length x width 2400 x 320 mm, * Hydraulic 4-point support, * Rod magazine (35 drill rods in the magazine? Diameter 60 mm), * 3 x rock drill bits, 1 x extension, pullback heads see pictures, * Remote control, air conditioning, * Mixing unit consisting of mixer with petrol engine and 2 water tanks, * Probe for control Kslhccewqv Acjqrjlu This description does not constitute a binding offer and may contain errors. No guarantee on all details. Visit our homepage as well

Condition: good (used), Year of construction: 2018, Flame drilling system Panel processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thicknesses: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic Turret Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring marking: 5 to 40 mm Minimum sheet dimensions: 1,500 x 300 mm (750 x 400 mm with restrictions) Kleljvzrczehccqrsu Minimum finished part dimensions: 80 x 80 mm Maximum sheet weight: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-setting cross conveyor Number of carriages: 2 clamps NC feed carriage, positioned on the side 4 collets (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable unloading table and chute In a material collection container for unloading small components. Filter unit including piping Powerful for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and scribing LANTEK license Availability: immediately ä200525

Condition: good (used), Functionality: fully functional, Year of construction: 2008, * Engine hours 10,644 * Drilling hours 4,039 Klolhcewl Dupscqreu * Engine power 224 kW * Operating weight 21,600 kg

Condition: excellent (used), Functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 5,200 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2023, operating hours: 397 h, Equipment: adjustable chassis, cabin, differential lock, hammer hydraulics, steel tracks, For sale a practically new piling machine of the Chinese solid brand Hengxing model HX R536D-1 with very low working hours, it is a self-propelled vehicle on metal tracks, a functional device and equipped with a hammer and drill for drilling. - We are able to transport this machine throughout Europe and Poland Kolhccowrb Iyeqrslu of course after verifying the distance. In addition, we are able to make a lease or loan for this machine. - Technical data: Name: Piling drill Manufacturer: Hxing Type/model: HX R536D-1 Serial number: HX-985-21205 Year of production: 2023 Working time: 397 h Basic technical data according to the manufacturer and nameplate Impact energy: 1400 J Piling depth: 5.1 m Hole diameter: From 50 to 300 mm Efficiency: 1 m/min Power: 70 kW Dimensions during operation: 3500 x 2650 x 7500 mm Transport dimensions: 6500 x 2500 x 2500 mm Own weight: 5.2 t Equipment: Hydraulic hammer Drill Inspection report: After checking the machine does not indicate any problems with its operation. All actuators and the engine without leaks, of course it is a used machine so you can't expect perfect condition but it is very good . The set includes a hammer and drill, tracks in very good condition without play.

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2019, Equipment: UVV, Here we are selling a drilling rig from the EPIROC brand. EPIROC SpeedROC 3F - Drilling rig for the natural stone industry - With the three drilling heads, the SpeedROC 3F is an efficient and productive drilling rig for drilling granite, limestone, marble and sandstone Main application area: Stone industry Drilling method: External hammer Rock drill/DTH hammer size: COP DS5 Hole diameter: 28 mm - 45 mm Maximum hole depth: 9 m Engine: 139 kW Cabin: Yes Air capacity (FAD): 42.5 l/s Pressure: 8 bar - Carrier device is a DOOSAN DX 210 W Kljlhccov Edkrjqrsu This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. No.: 20 If you have any further questions, please call us or send us an email. You can find more interesting offers on our homepage! Many machines and parts available. ----- Here we sell an EPIROC drilling rig. EPIROC SpeedROC 3F - Drilling rig for the natural stone industry - With the three drill heads, the SpeedROC 3F is an efficient and productive drilling rig for drilling granite, limestone, marble and sandstone Main application area: stone industry Drilling method: external hammer Rock drill/DTH hammer size: COP DS5 Hole diameter: 28mm - 45mm Maximum hole depth: 9 m Engine: 139 kW Cabin: Yes Air capacity (FAD): 42.5 l/s Pressure: 8 bar - Carrier device is a DOOSAN DX 210 W This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. No.: 20 If you have any further questions, please call us or write us an email. You can find more interesting offers on our homepage! Many machines and parts available.

Year of construction: 2004, Condition: used, machine/vehicle number: 0201-250003, Voortman V600 drilling machine for profiles and flat steel with a movable drilling unit. Kslhccqjv Rl S Ierjlu CNC-controlled drilling unit with longitudinal travel, adjustment from 0 to 18,300 mm, with manual quick-change tool chuck, vertical hydraulic hold-down device, web and flange height measurement, and automatic, electronically infinitely variable feed and speed control (continuous monitoring), enabling optimal machining. Adjustment via frequency-controlled spindle drive. Thread cutting with special tools is available for an additional charge. Punching points can be added.

Condition: used, Year of construction: 2009, operating hours: 10,202 h, Horizontal flush drilling rig, Tracto Technik, Grundodrill 15 XP * Grundodrill * Type 15XP, Klslhccowfvwvjqreu * Year of manufacture 2009, * 10,202 hours read according to the counter * Powered by a 4-cylinder Perkins diesel engine with 106 kW / 144 HP, * 2 speeds, * Single cab with 1 seat, * Transport dimensions (length x width x height): 6450 x 1900 x 2250 mm, * Weight 9620 kg, * Crawler chassis with 10-15 mm rubber track, * Undercarriage length x width: 2350 x 400 mm, * Rod magazine (31 drill rods in the magazine, diameter 60 mm) * 2 drill heads, 2 retractor heads (see pictures) * Remote control, air conditioning This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Visit our homepage

Condition: used, Year of construction: 2006, Manufacturer: TAMROCK Year of manufacture: 2006 Kslhccov S Ebreqrolu Type: Pantera 1100 Operating hours: approx. 6,200 h Weight: approx. 19,200 kg Includes one drill rod

Condition: like new (used), Functionality: fully functional, fuel type: diesel, fuel consumption per hour: 4 l/h, fuel tank capacity: 30 l, color: red, overall weight: 1,400 kg, first registration: 01/2022, Year of construction: 2022, operating hours: 351 h, workpiece width (max.): 3 mm, Equipment: adjustable chassis, gripper hydraulics, hammer hydraulics, hydraulics, low noise, rubber tracks, Buy Adler B25 drilling rig, excellent condition with low motor hours, suitable for working in built up areas, raised gardens. Like new condition, includes 1.5m long rods to 60.m depth, hydraulic hammer with 120 and 151mm crowns, PCD water flush drill 171mm, flush and hammer hoses, auger drill, aluminium pool, water pump included with machine, suction pump, bell for pulling rods off head, rod pulling key, trailer towing device. Kslhjubd Taeccqrjlu