Used Tansformer Station for sale (4,931)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Rsdpfx Aozkt A Rec Tjcf Saw blade in the X direction

Condition: new, Year of construction: 2025, Plant Type : Compact Concrete Plant with Twin Shaft Mixer Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Rjdoflz Iqopfx Ac Tecf Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access A very low transport cost : only one container. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * LOW SHIPMENT COST(just TWO 40F-OT container or TWO standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,148 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 650 mm, spindle motor power: 37,000 W, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, positioning accuracy: 0.008 mm, tool weight: 20,000 g, number of slots in tool magazine: 48, number of axes: 5, This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details. Technical Data • Machine Type: Twin-Spindle Horizontal Machining Center • Control Unit: Siemens SINUMERIK 840D sl • Operator Panel: Siemens OP15T with integrated TCU • ECO Mode • Remote Diagnostics (eWON Router) • PROFIBUS Interface for Automatic Workpiece Loading • Signal Tower (3-color LED) Travels • X-Axis Travel: 750 mm • Y-Axis Travel: 660 mm • Z1-Axis Travel: 650 mm • Z2-Axis Travel: 650 mm Rapid Traverse • X-Axis: 60 m/min • Y-Axis: 60 m/min • Z1/Z2 Axes: 90 m/min Axis Performance • X-Axis Acceleration: 6 m/s² • Y-Axis Acceleration: 6 m/s² • Z1/Z2 Axis Acceleration: 9 m/s² • Feed Force X: 15,000 N • Feed Force Y: 15,000 N • Feed Force Z1/Z2: 10,000 N • Positioning Accuracy: 8 µm Spindle • Number of Spindles: 2 • Precision Motor Spindles • Tool Holder: HSK-A63 (DIN 69893-1) Redszqr Skjpfx Ac Tscf • Spindle Speed: 12,000 rpm • Spindle Power: 37 kW (40% ED) • Spindle Torque: 85 Nm (40% ED) • Maximum Torque: 100 Nm • Direct Drive Axes / Swivel System • 2 NC B-Axes • 2 NC Rotary Axes (A-Axes) • Swivel Range: 0°–180° • Swivel Time (0°–180°): approx. 5 s Technology • Independent X, Y and Z Axes for both Spindles • Separate Direct Measuring System for each Axis • Independent Z-Axis Correction Range: 5 mm Tool Magazine • 96 Tool Stations (2 × 48) • Maximum Tool Length: 400 mm • Maximum Tool Diameter (Adjacent Pockets Occupied): 80 mm • Maximum Tool Diameter (Adjacent Pockets Free): 250 mm • Maximum Tool Weight: 20 kg Lubrication • Automatic Central Lubrication • 5-Channel Media Transfer (Oil or Air) Cooling / Coolant • 70 bar Through-Spindle Coolant • Coolant Tank Capacity: 2,300 l • Coolant Flow Rate: 400 l/min • High-Pressure Pump: 15 kW • Automatic Coolant Refill • Coolant Cleaning System • Water Cooling • Cooling Water Temperature: 22 °C • Cooling Water Flow Rate: 800 l/h Chip Management • Scraper-Type Chip Conveyor • Chip Conveyor Discharge Height: < 1,150 mm • Dry Machining Ready • MMS (Minimum Quantity Lubrication) Compatible Electrical Data • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V DC • Connected Load: 150 kW Additional Features • Automatic Workpiece Loading Interface • Automatic Tool Changer • Closed Machine Enclosure • Machine Lighting • Pneumatic Equipment • Energy Monitoring System • Automatic Media Connections • Modular Machine Design Additional Information • Motor Spindle 11 replaced in Week 19/2024 • Motor Spindle 12 replaced in Week 24/2023 Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle No Driven Tools No

Year of construction: 1988, condition: used, Automatic edge gilding machine Ochsner GA Year: 1988 Description: Grinding stations Regulation of grindings Brush with exhaust Priming station Redpfxezqt Efe Ac Tecf Gilding station Electric steering and controlling desk

Condition: new, The new, ultra-modern, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many options for cutting your wood and logs correctly. Maximum cutting precision thanks to cutting thickness calculator, lower part galvanized, upper part powder-coated including pre-cutting device! For all types of wood, logs or old wood. Can be extended indefinitely with extension sections. Very stable thanks to solid welded frame. CE tested. The original!, not a replica!!! Technical data: max. log diameter 750 mm max. board width 620 mm motor output S6 7 kW (5.5 kW S1) motor output feed motor 0.37 kW max. feed speed 17 m/min cutting length 3.45 m (can be extended without limit) min. cutting length without aids 0.75 m saw band length 4140 mm saw band width up to 35 mm diameter of the band wheels 500 mm dimensions W x H x L 1980 x 1670 (1910) x 5300 mm band speed 13 m/sec weight 460 kg standard equipment: - electric feed, continuously adjustable - electronic speed display - electric height adjustment with electronic height display - cutting thickness calculator with automatic travel to the specified height - special device for setting the exact wood thickness - 2 basic sections - 3 90° angle stops - 3 log clamping devices - Band tension indicator - Bimetal saw blade for all types of wood - Hydraulic band tension indicator - Irrigation valve Optional equipment Rodpfxovrvigs Ac Tocf - Extension section with angle stop and log clamping device extends the cutting length per piece by 2.25 m - 7.5 kW motor - Cover tarpaulin - Sharpening machine - Setting device - Log turning lever

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Rcodpezqunhjfx Ac Tjf Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2004, total height: 2,600 mm, total width: 6,800 mm, product length (max.): 40,000 mm, Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details. - Machine Type: Complete production line with turning station and Bargstedt stacker- Components:* M.01: OPTIMAT TBR100/30/12 (HOMAG)* M.02: PROF. KFR20/16/A3/15 (HOMAG)* M.03: OPTIMAT TDR310/30/12 (HOMAG)* M.04: OPTIMAT KFR526/10/A3/35 (HOMAG)* M.05: TFR560/S/R/24/21/3 (BARGSTEDT)* M.06: PROF. TSP410/ER/35/12/S (BARGSTEDT)- Length: 40m- Width: 6.8m- Height: 2.6m (with hoods/flaps open)- Function: Panels are formatted, milled, seamed, grooved, and edged in a single work process; specially configured for the production of storage and partition wall elements- Workpiece Length: min. 250 mm - max. 3,200 mm- Workpiece Width: min. 250 mm - max. 1,350 mm- Workpiece Thickness: min. 15 mm - max. 57 mm Rcsdpfx Acszuhc Ts Tsf

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Rcjdpfsztk Atsx Ac Tef Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box Rcsdpfjzpw Saex Ac Tef The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: refurbished (used), Year of construction: 2005, operating hours: 80,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, position of the milling head: Orthogonal, spindle speed (max.): 2,200 rpm, spindle speed (min.): 22 rpm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 22 rpm, year of last overhaul: 2026, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, Used SHW UF 6L – Universal Milling and Drilling Center Year of manufacture: 2005 Machine no.: XXXX Partially overhauled in 2026 High-performance SHW universal milling center with a large working area, automatic universal milling head, Heidenhain iTNC 530, and extensive equipment. Rjdoztqyljpfx Ac Tjcf Technical main data Travel ranges X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,600 mm Automatic universal milling head CNC-controlled, swivels in two planes Milling head mount: 360 × 1° Milling head: 180 × 1° A total of 64,800 programmable head positions Tool mount: SK 50 / DIN 69871 Hydromechanical tool clamping Oriented spindle holder 360 × 1° Main spindle Drive power: 40 kW at 100% ED Max. power: 56 kW at 40% ED 2-stage gearbox Speed range: 22–3,200 min⁻¹ Feeds X-axis: up to 20,000 mm/min Y/Z-axis: up to 24,000 mm/min Digital AC feed drives Direct linear measuring systems CNC control HEIDENHAIN iTNC 530 External electronic handwheel HR 420 Second control panel in front of the machine Equipment Electro-mechanical leveling system for the spindle stock Traveling work platform with CNC control panel Pick-up tool station for 10 tools Max. tool weight: 25 kg Max. tool length: 400 mm Wireless measuring probe, 3-dimensional 1-channel collision monitoring Internal and external coolant supply Coolant pressure up to 16 bar / approx. 32 l/min Coolant/air switching Paper band filter system Coolant tank approx. 800 l Oil cooler for the spindle stock Hinged belt chip conveyor Impulse central lubrication system Traveling control cabinet Fixtures incl. foundation anchor bolts Connection data 400 V / 3 phases / 50 Hz Connection power approx. 80 kVA Fuses 160 A Compressed air 4–6 bar Robust SHW universal milling center with an 8,000 mm X-axis travel, a powerful 40 kW main drive, and an automatic universal milling head – suitable for the flexible machining of large and complex workpieces. Accessories such as a dividing head table and rotary table available upon request. Automatic tool changer (ATC) available upon request. Images are sample images.

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm Rcsdpfozt Swljx Ac Tsf *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.

Condition: good (used), Year of construction: 2023, functionality: fully functional, Spinner TC 600, Year of manufacture 2023, Rcjdpfx Aszua Nfoc Tjf Fanuc 32 i TB control system, Travel range X/Z 275/700 mm, Chip conveyor, Tailstock, 16-station turret, VDI 40, C-axis, Powered tool holders, 3-jaw chuck, Ø 250 mm, Accessories.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Rcjdoyz Ia Ijpfx Ac Tsf Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch Rjdpfx Ajy Samuoc Tjcf - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine Rcsdpfsy Saqgox Ac Tjf - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Suitable for outdoor installation. Rcsdjzukulepfx Ac Tef New filters are included. The control system is equipped with a speed control function via a frequency inverter.

Condition: used, Year of construction: 2016, weight max. in kg 1000 kg fork length 1150 mm stroke height 800 mm weight of the machine ca. 145 kg Rjdeu S R Dmspfx Ac Tecf Electric scissor lift pallet truck from Rapid Type: REE.1000 Year of manufacture: 2016 Condition: used, in working order Note: without charging station and without battery!

Condition: used, Daewoo Puma 12S-3A CNC Turning Centre Year: 1996 Fanuc Series O-T CNC Control C-Axis Spindle Live Tooling 12 Station Servo Turret Hydraulic Chuck Redpfx Aezrt Dwjc Tjcf Swing Over Bed: 570 mm Maximum Turning Diameter: 430 mm Maximum Turning Length: 770 mm Serial Number 3P100044 90 mm Bar Capacity 91 mm Spindle Bore A2-8 Spindle Nose Spindle Speeds: 25–3,000 rpm 18.5/22 kW AC Spindle Motor X Axis Travel: 260 mm Z Axis Travel: 800 mm Rapid Traverse: X 20 m/min, Z 24 m/min Automatic Lubrication Coolant System Swarf Conveyor Fully Enclosed Splash Guarding

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw with electrically driven roller conveyor Roller conveyor with hydraulic ejectors 4 m roller conveyor Redpfxswhcwho Ac Tecf All electrical and hydraulic elements can be operated from the operator's station. Zenz automatic sharpening machine, type AHB No. S-1012

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable Rcodpfx Aexuad Ajc Tef - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: used, mileage: 552,881 km, power: 331 kW (450.03 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total length: 10,250 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 6,658 mm, loading space width: 2,486 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Scania R450 6x2 LL with sideboard body (Serial No. 12371) Cab (Cab type): CR, High roof, Color: Arctic Silver Metallic * Air conditioning: automatic * Auxiliary heater: WTA cabin heater 3 kW * Additional cab cooling: available * Air-suspended comfort cab * Electric sunroof Redpjztihzofx Ac Tecf * Comfort seats: Driver's side Premium, Passenger side reclining seat, both with velour upholstery * Lower bunk: 800 mm, pocket spring mattress * Upper bunk: 700 mm, with safety net * Refrigerator and drawer in the rear area * Numerous storage compartments, including above the doors * Exterior mirrors: electrically adjustable and heated, wide-angle and close-range mirrors * Sun visor outside and on the driver's door * Rain sensor * Electric windows * Central locking with remote controls * Roof railing * Coffee maker in the dashboard * Lower storage compartments: Refrigerator (driver's side), Drawer (passenger side) ----Comfort and Infotainment* Premium infotainment system with touch screen * DAB+ / Navigation / Bluetooth / Phone / Traffic / MP3 * Navigation system with European maps * Multifunction steering wheel * Digital radio (DAB) * Bluetooth hands-free system * CB radio Stabo XM 3003 * USB charging sockets at multiple locations * TV preparation * 12/24V sockets: extended * Rear view camera ----Electrical System and Lighting* Headlights: LED, with cleaning system * Fog lights: LED * Daytime running lights: LED * Rear lights: LED * Work lights rear: left and right * Roof lights * Sun visor ----Safety and Assistance Systems* Adaptive cruise control (ACC) with active predictive function * Lane departure warning system (LDWS) * Immobilizer * Airbag in the steering wheel * ESP (deactivatable) ----Engine and Drive* Engine: DC13 148/450 hp, 331 kW, Euro 6, 13 liter displacement * Transmission: GRS895R with Opticruise (automated manual transmission) * Retarder: Scania R3500 * SCR system (AdBlue) * Particulate filter (DPF): available ----Chassis and Brakes* Trailing axle, steerable & liftable * Full air suspension * Disc brakes, electronic brake system * ABS/EBS * Hill hold, emergency brake assist (Advanced Emergency Braking) * Differential lock, rear axle * Fifth wheel coupling: Ringfeder 4045 (40) ----Body: Wooden floor with rail system * High side walls (foldable) * Fixed front wall * Storage boxes FASSI F155A.2.23 Rear-mounted crane * Radio system with remote control & charging station * 2 additional hydraulic outriggers * 3 telescopic booms up to 10.35m & 1260 kg lifting capacity * max. lifting capacity of 4800 kg ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 600 liters * AdBlue tank: 80 liters * Technically permissible total weight: 26500 kg * Tare weight: 13600 kg * Permissible trailer load: 29542 kg * Overall length: 10250 mm * Wheelbase: 4750 mm * Next inspection due: 02.2027 ----Fliegl ZPS 180 drawbar trailer (Serial No. 12370) * First registration: 11/2013 * Axles: 2 * Width: 2550 mm * Loading area length: 6934 mm * Loading area height 800 mm * Weight: 3690 kg * Permissible total weight: 18000 kg * Payload (in kg): 14310 kg * Height: 2600 mm * Loading area width: 2486 mm * Next inspection due: 01.2027 * ABS * Air suspension * EBS Description: * Wooden floor with rail system * Side walls foldable * Fixed front wall * Air suspension * Storage boxes * SAF axles with drum brake * Wabco Trailer EBS-E ----* Tire dimension: 385/65R22.5 * Technically permissible total weight: 18000 kg * Tare weight: 3690 kg * Overall

Condition: used, This listing is for 1 of 3 Eppendorf EntericBio Workstation. The unit is in full working condition and is ready for immediate release. The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system. Key Features and Benefits: - Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency. - Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling. Rodpfx Acoxxyglj Tecf - Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run. - Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes. - Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing. - Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices. - User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time. - Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Rcsdpfxsyrf T Ss Ac Tof Max. turning diameter Ø 710 mm Turning length 1500 mm Kuka robot 140 kg without handling attachment 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm Rcsdpfozta H Iex Ac Tjf - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), first registration: 02/2024, fuel type: electric, overall weight: 2,390 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, RRP: €41,000. Technical data & drive: Power: 100 kW / 136 hp * Torque: 260 Nm * Top speed: 135 km/h * Battery capacity: 50 kWh net / 54 kWh gross * Range: Up to 275–345 km according to WLTP Charging times: DC (Direct Current): Up to 100 kW at a fast-charging station (0 to 80% in approx. 30 minutes). * AC (Alternating Current): Three-phase charging at a wallbox with up to 11 kW. Special equipment: Rear wing doors with glazing Metallic/mineral effect paint Opel Connect Rear parking pilot system Additional equipment: Driver's airbag, audio controls on the steering wheel, audio system BT (Bluetooth/USB interface), electric vehicle, electric motor 100 kW (cont. 57 kW), body/superstructure: van, charging cable with Schuko plug (Mode 2), closed cargo area partition, on-board charger (11 kW), wheel hub covers, wheelbase 2785 mm, halogen headlights, sliding door on the right. Rcodjzt Ulxopfx Ac Tef