IPTE OLED BurnIn electrical test station
Here we offer you an IPTE OLED BurnIn electrical test station.
IPTE OLED BurnIn electrical test station
Description of function:
It is an electrical test station which is used for testing and BurnIn of
OLEDs. The OLED board to be tested and the contacting insert used in the test station
have to match.
Insert the test specimen:
The insertion of the test specimen (here: OLED) is done manually by the operator of the system.
The untested OLED plate is inserte...
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
power capacity:55,0 kW
Fe7ib0b
weight:50,0 t
die c...
/ year of construction: 1993 / min. sheet size: 51 x 95 mm / max. sheet size: 370 x 610 mm / min. book thickness: 3.2 mm / max. book thickness: 22.2 mm / max. binding speed: 1800 cycles/hour (according to manufacturer) / pitch: 2:1 and 3:1 / including: 1 punching tool / immediately available
Bisutuv7m2
Perforator for calendars Magav James Burn KL-50V
The device is in perfect condition, very little used.
500mm working width
Stack height 3mm
Bs9cyjdaur
3: 1 perforating tool 4.2mm circle + tool for plastic bindinmg.
Triggering of the machine cycle with the foot pedal.
200kg
380V power supply
manual Wire O combined punch and binder
Bgsvdra3cs
table top model
punch tools 2:1 and 3:1
Automatic Wirebind machine, with all the equipment to bind 3:1 and 2:1
Bmmmfdruqe
wire-O, suitable for books and calendars.
automatic calenderunit. possibility for skip-binding
Maximum binding length 43 cm
Working width 500 mm
Bdiotsghld
Now available with 3 tools
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
2wdpz2jj
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
Serial No. 3411032198
Control Strippit Model 404561-000 Serial No. 010
Material thickness 1/4" / 6mm
Hole size 3.1/2" / 89mm
Sheet thickness 1/4" / 6mm
Sheet size 40" x 50" / 1016mm x 1270mm
Sheet weight 93 kgs
Throat depth 40" / 1016mm
X axis travel 40" / 1016mm
Y axis travel 51" / 1295mm
Hit rate 200 Hits per Minute @ 1" / 25.4mm Centres
Input 380/420/3/50 ac
Equipment Rounds 2.5mm, 4.1mm, 6mm, 6.35mm, 17mm, 17.5mm, 18mm, 20.6mm, 22mm, 22.5mm, 25mm, 25.4mm, 34.6mm, 36.5mm, 38mm, 40mm, 50mm, 55...
High volume sander designed to give fine finish on turned components with a minimal loss of detail
Max component length 1200mm
Max component dia 120mm
3 spindle speeds 1000 / 2000 / 3000rpm
Number of spindle stations x 8
Spindle motor x 3hp
Sanding belt motors 2 x 0.5hp
Hydraulic motor x 3hp
Ulqmiz8d
2 sanding belts [ one sanding + one polishing ] guided by hydraulic copier following template
2 sanding stations for abrasive flap brushes
Code: ST3327
0fv2zjgz
Comac 12 Station Roll Former
12 Top Rolls12 Bottom RollsForm Roller Shutter Door Sections
Distance Between Frames: 225mm4 Front Levelling RollsDouble Sided 1 Ton Coil Holder
* General * SKUR0229 * LocationBarneveld * MakeR. Sturm GmbH (D) * TypeZ-K1514-BE / Z-TRA-2T-800-AS100-G / Z-FS-K1514-BE * No.K1514-05 * Year of construction2005 * Material * MaterialStainless steel 1.4571 (316Ti) * 24T07 * Metering screw * Screw diameter180mm * Pitch110mm * Shaft diameter40mm * Screw length600mm * With hopper830x580x400mm * Inlet830x400mm * Outletdia 200mm2,2 kW 230/400 Volt * Information * Mounted on frame * With switchgear * Floorspace2,5x1,9 M * Total height1,9 M * Weight650...
Ref. -No.: 10198
Brand: N/A
Storage location: Halberstadt
Btwozqmhcr
Turning station, swivel station, turning table, swivel table, plate turner, plate turning device
-Turning station (without conveyor belt)
-pneumatic vacuum suction cups: 6 pieces
-Suction cups diameter: 60 mm
-Device pneumatic lifting stroke: 120 mm
-swiveling via: servo motor
-without control
-no technical documentation available
-Vacuum pump: via compressed air
-Fork length: 900 mm
-Distance of the fork inside/outside: 750/900 mm
Bdmpnq33hk
-Number: 4x turning stations available
-Price: per p...
Serial No. 25100075
Control Fanuc 18-P
Capacity 20 ton
Material thickness 6.4 mm
Press stroke length 40 mm
Sheet size 1250 mm x 2500 mm or 1250 mm x 5000 mm with 1 reposition
Sheet weight 150kgs
X axis travel 2500 mm
Y axis travel 1270 mm
Hit rate X axis 25.4mm pitch = 350, Y axis 25.4 mm pitch = 280
Feed rate X axis = 100 m/min , Y axis = 80 m/min
Input 415/3/50
Fitted with Brush tables, "Sick " infra red lightguards, quantity of tooling
Equipment Dryer
Ut8ewug
Features Running hours - 424 hour...
Single tower, Length of conveyors: +/- 50 mtr
Bfru2ylqc
