Used Tansformer Station for sale (4,857)

Condition: used, Manufacture : Volkmann Model : RNT 180 Type: Station for filling and emptying pouches, bags and other packaging. Connection for pneumatic transfer Fine particle extraction system Aspiration : Multi Ejector + Vacuum pump G1800 Pneumatic filter cleaning system Air tank : FESTO CRVZS-2 (capacité 2 L) / Pression max : 16 bar Level probe Opening sensor Lrsdpoyk Invofx Adqoi Side vibrator 100% pneumatic unit 3 filters supplied with the machine

Year of construction: 2005, condition: used, Equipment Twin Multi Disc unwind station MTD-AWS-OWK • 2 MTD-AWS-OWK Combination unwinding station Lrodpsc Ihxrofx Adqsi • 1 MTD-ZSF-LI-MSD Stack pacer LAT • 1 LAT-2:1

Year of construction: 1999, condition: ready for operation (used), Built in 1999 Equipment: 4 printroll unwinding stations 0350.0416 • 43470 hours printoll 1 • 47630 hours printroll 2 Lodpfjd N D Ngjx Adqsri • 46488 hours printroll 3 • 44802 hours printroll 4

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Ljdpfxjd N D Nhe Adqeri Working hours: 14.565 tsd. h Equipment: 1 printroll unwinding station 0350.412-353

Year of construction: 1999, condition: ready for operation (used), unwinding station Built in 1999 Lodpjdygu Sjfx Adqjri

Year of construction: 2000, condition: used, Mueller Martini 351.0412 unwinding station Built in 2000 Lrsdpfec Ruydjx Adqsi

Year of construction: 1990, condition: ready for operation (used), Delivery station Lrodpfx Ajd H E Iwodqei Built in 1990

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Lrjdpjyv Uunsfx Adqei

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm Ljdpfx Adeytx Uroqjri for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: new, Ruchser standard offer with layout for a timber window production line featuring profiled glazing beads and screwed corner joints. Daily capacity approx. 30 windows The production line consists of: Pos. 1.0 – Article 107850000 1 piece RU-PWD-H1600/130/4 profile trolley, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cuttings. 12 pairs of storage arms welded to each column, 2 central columns adjustable, clear spacing between storage arms 130 mm, depth of storage arms on each side 400 mm, arms covered with felt, with 4 plastic castors, diameter 150 mm, 2 of which have locking devices. Pos. 2.0 – Article 10776000 1 piece RU-MSTR assembly station for frame fitting components, 3000 mm long, width 600 mm. 1 shelf for hardware parts, 1 support table covered with felt, working height adjustable between 900 – 1100 mm (without screwing units). Pos. 2.1 – Article 6747 1 piece running rail with carriage, 3000 mm long. Pos. 2.2 – Article 6308 1 piece balancer for equipment 3 to 5.5 kg. Pos. 2.3 – Article 10778000 1 piece RU-STS-A inline screwdriver with automatic screw feeding system POWASERT, consisting of inline screwdriver and feeder unit ADS-MF4, complete with hose connections. Inline screwdriver ADS 2445 RD with torque shutoff. Set up for the screw feeding used by the customer. Suitable for the following screw dimensions: Shaft diameter: 2.4 – 4.0 mm Shaft length: 10 – 35 mm Head diameter: 5 – 8 mm When ordering, information about the screw must be provided to the manufacturer at the factory. Pos. 3.0 – Article 10782000 1 piece RU-EW-2S storage trolley, double-sided, max. storage capacity 36 sash frames screwed in an L-shape, length 1200 mm, depth 800 mm, height 2200 mm, support rails covered with felt, 4 castors, 2 of which have stoppers. Pos. 4.0 – Article 10766000 1 piece RU-DR-1 rotary table with mobility unit for frame assembly. Table with parking brake. Support platform with cross beams and one extension to the left and right, each with felt pad. Base dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, working height adjustable 900 – 1100 mm. Pos. 4.1 – Article 5360-01 1 piece fixed tool tray, 1000 x 400 mm for RU-DR-1. Pos. 4.2 – Article 6354 1 piece 3-meter double guide rail for mobility unit, rail height 10 mm. Pos. 4.3 – Article 6454 1 piece mobility unit with flanged track wheels and parking brake. Pos. 4.4 – Article 6788 1 piece corner screw device. 1 pair of pneumatically height-adjustable clamping units for securing profiles at right angles. Pos. 5.0 – Article 10383000 Lrsdpfjytx Uljx Adqoi 1 piece RU-DK-T14/34 tilt-turn table with pneumatic tilt system. Working platform with 4 support bars, base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Tabletop covered with felt. Tilting table height adjustable from 900 – 950 mm. 2 folding and sliding support plates installed.

Condition: ready for operation (used), Year of construction: 2013, An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible. Lredpsyv H E Ssfx Adqei

Year of construction: 1991, condition: ready for operation (used), A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible. Lrsdpfjyvixnex Adqoi

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min Lodjrv Av Ijpfx Adqeri -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Condition: good (used), Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing Lredporrzfgefx Adqoi -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

Condition: used, Turning station RITTAL / E SYS-K System GmbH Ledpfxsv Tdkbs Adqori Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg As-new condition

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester Ljdof Axn Aepfx Adqsri The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement Lrsdpod Dc Unofx Adqoi - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition Lrsdpfx Aoyk Hrgjdqoi

Condition: excellent (used), Soco System One Man Packing Station Mobile box erector Carton case sealing machine Top and bottom tape heads Model: T-100 380 V, 3 Ph Plastic rollers, roller width: 670 mm Ledpfxjhlp Nxo Adqjri Height adjustable legs Total dimensions: 1030 mm x 810 mm x 1660 mm.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Rotox sash assembly table, year of manufacture 2007; automatic screw feeding, adjustable screwdriver height, corner bearing drilling unit, fittings shelf Ljdpfxjyr Arxj Adqsri

Condition: used, Year of construction: 2005, Horizon collator VAC-100c offer consists of: - air suction collator VAC-100c Horizon VAC-100c air-suction collator - technology: touch & work - model: air-suction collator - bins: 10 - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/sqm - production speed: max. 9.500 cycles/h - loading height: 55mm/ bin - power: 230V; 50/60Hz - 1,86kW - dimension: 842x652x1.961mm - weight: each 310kg - extra function Horizon VAC 100c: collating to both sides collator usable separately Ljdpfsxxti Tox Adqeri We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Ingredient Station ZS 15 Ingredient station / ingredient trolley with 15 tubs for ingredients worktop on top for weighing Stainless steel construction, mobile Lrjdpfx Adjykiageqji Used device, cleaned We have more stainless steel furniture in stock!

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Pressing force: 1,600 tons Lrjdpfx Adox R U Nujqei Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: used, Year of construction: 1994, functionality: fully functional, power: 0.75 kW (1.02 HP), protection type (IP code): IP55, We offer this used Mannesmann Demag 500-K-V1 Big Bag Discharging Station, year of manufacture 1994. Permissible load capacity: 0.5 t Lodoyv Uz Uepfx Adqeri Year of manufacture: 1994 Hook lift: 10 m Chain dimensions: 5.8 x 15.2 mm Chain group: 10 H Lifting speed under load: 8 m/min Lifting speed unloaded: 4 m/min Rated motor power: 0.75 kW Rated current: 2.3 A Rated motor speed: 2680 rpm Protection class: IP55 If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Lredpjibx S Nofx Adqji Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de