Concrete mixer

9m3 stationaire betonmixer 4Rent

Condition: new, fuel type: electric, color: white, Year of construction: 2021, Year of manufacture: 2021 Model year: 2021 Iaedpfxjuu A Tye Ag Ujl Usable material: Concrete CE marking: yes Damages: none Price: On request

Condition: new, Year of construction: 2026, EuromixMTP - Roll-off tipper - Superstructures - Truck mixer EUROMIX MTP - Truck mixer superstructure EM 5 L lightweight construction Model: EM 5 L * Nominal volume 5m³ ready-mixed concrete * Mixing drum in lightweight construction * Mixing drum in lightweight design made of HARDOX S450 * Mixing spirals in lightweight design made of HARDOX S50 * Gearbox made by ZF P4300 * Hydraulic pump Bosch Rexroth * Hydraulic motor Bosch Rexroth Ijdpfsvv D E Rox Ag Uoal * Integrated oil cooling system * Mechanical mixing control and electric start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, one-sided with C-coupling * Mixing drum with a service flap * Step ladder with stand platform * Rubber attachment on the filling funnel * Swiveling, single-arm discharge chute made of steel * Wear plates in the filling funnel, discharge bowl and swivel cord * Drum lock to secure the drum during maintenance work * Polyurethane primer * with emergency stop function in accordance with EU safety technology * steel wings over the rear axles * 2x extension gutters made of steel or plastic * Water system * 500l water tank (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection "C" coupling, * Operation & electrics * Mixer operation - mechanical rear * Start-stop system (with EDC If you have any further questions, our team is available in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ????? ????? * Govorimo Srpskohrvatski

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Iasdpfswpfv Aox Ag Uel - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. Iasdpfxofnldqe Ag Uol LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: good (used), functionality: fully functional, machine/vehicle number: 5630717, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 1,350 kg, type of input current: three-phase, input current: 6 A, input voltage: 380 V, cutting height (max.): 110 mm, input frequency: 50 Hz, Equipment: documentation/manual, Adast Maxima MS80 cutting machine, good working condition, Iodjxfu Svepfx Ag Uoal cutting length 800mm cutting depth 800mm all documentation included spare knife included

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm Isdpsvxfkgefx Ag Usal - book thickness: 2 - 80 mm

Condition: refurbished (used), Carpigiani specialized service 100% refurbished machine. New pumps, complete gasket set, new knife, practically new machine. Pasteurization function, 2+1 flavor, 2x20 liter tank, 65kg/h capacity, air cooled. 2 pcs available. Iasdpfxjwi U N Ss Ag Usl

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2025, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. Isdpoq I Nxdsfx Ag Ujal - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Hammer crushers are versatile machines that can handle a wide range of materials and are suitable for both primary and secondary crushing. The size and design of the crusher depend on the specific application and material characteristics. Operators should follow manufacturer guidelines and safety precautions to ensure optimal performance and safety.

Condition: like new (used), functionality: fully functional, Canon IR Advance DXC5850i For sale in good condition. Counter: 36k Ijdpfxswryane Ag Uoal Black: 33k Color: 3k We have more machines in stock! For more information please send a message

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 • Comes from ongoing production Isdpfxsvxthtj Ag Ujal • More information on request