Used Tansformer Station for sale (5,128)

Condition: reconditioned (used), functionality: fully functional, URBAN Sash assembly station Hsdo Aayiyspfx Akijw

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway Hsdpfx Aszzyd Ajkisw * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Hjdpfxeytm Tie Akijw

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. Hjdjzrg I Aspfx Akisw The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: good (used), Matcon IBC Discharge cone Stainless steel, 1000L, IBC discharge stations, 4 in stock Hedpfxjtxrb Ao Akisw

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Labeling stations Barbaric Labeling LPS, year of manufacture 2021 each with Godex EZ235I label printer Belt feed table, suitable for automated warehouses or panel saws Hjdpfxoxy Afao Akijw

Condition: good (used), functionality: fully functional, machine/vehicle number: 5.000 Liter-Tankstelle, tank capacity: 5,000 l, 5.000 l diesel or heating oil pump station Hjdpfodccdqsx Akiew

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Hodpfeyv Uunox Akisw

Condition: new, Year of construction: 2026, Label roll: 250 mm Hodpfx Asz Surhjkisw Height of dispensing edge from floor: adjustable from 50 to 100 cm. Mobile on wheels

Condition: used, BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Applications: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for power supply and lamp • Power supply: 220 V Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Hsdpfx Aksxl A Edsiew You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Evaporation station for apple concentrate with a capacity of 12,000 liters juice inflow. In 2014, it was completely modernized by B&P Przeworsk, which is now Bucher Unipektyn. Hodsxn Uq Dspfx Akiew

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Hsdpfxez Sndxj Akiew Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: good (used), Year of construction: 2020, Denios Spill Containment Tray Duo IBC Station ECO 2 Manufacturer: Denios Type: IBC Station ECO 2 Hsdpfeyx Sdljx Akiow Year of manufacture: 2020 Material: PE-LLD Load capacity: 4,000 kg with evenly distributed load Sump capacity: 1,000 l Gross sump capacity: 1,100 l Approval: Z-40.22-303 Version: for 2 IBCs without platform Serial number: 100583705-004

Condition: used, This listing is for a Hirschman pipetus with charger station The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Hsdpfx Ajxv Dznskiow Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, Lippelt Moli 580 seed station Working width: 580 mm One-sided seed application 1 x distribution hopper with brush 1 x distribution hopper with fine and coarse spreading roller Humidification via water bath Pressing roller to secure the seeds to the dough pieces Grid belts, removable Movable seed collection container Control with start/stop button, 2 x potentiometers for belt speed and spreading rate, and emergency stop button. Hsdpfoz A Sbgox Akijw

Condition: used, Seed distribution station, moistening, seeding, Kövy bread roll systems – best suited for Kövy bread roll systems. Hjdpfx Aoz A Spkskiew

Condition: used, Hydraulik Station with 700 liter tank Hodpj Aa Dcdofx Akiow 1 x Rexroth Pump mounted on 15 KW Motor / 1450 rpm. 2 x Rexroth Pump mounted on 22 KW Motor / 1465 rpm. Tank dimensions: l x w x h = 1,50 x 0,94 x 0,5 m

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. • Year of manufacture: 05/2013 • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet Hedsuzylhopfx Akijw

Condition: used, Jungheinrich charging station for forklifts Industrial charging station, maintenance stand for battery maintenance If you use electric forklifts in your facility, they rely on accumulators or batteries as an energy source. By installing a battery charging station, you benefit from a compact solution that significantly simplifies the charging of accumulators. The system serves as a charging station for forklifts (such as reach trucks). It has three charging bays with Tecna spring balancers that keep the charging cables in position. Construction: The yellow steel structure comprises a metal frame with an integrated crash guard at the bottom to protect the system from damage caused by vehicles. Spring balancers are mounted on top, which enable ergonomic handling of heavy cables. Hedpfx Asy Nxulokiow Jungheinrich battery charging station for floor mounting Length: 4.15 m Width: 0.70 m Height: 2.30 m Year of manufacture: 2023 Without charging devices "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2026, condition: new, functionality: fully functional, Mobile battery charging station – Safe charging without fire hazards Visit acculaadstation.com for more information. Are you looking for a safe and flexible way to charge your traction batteries (forklift, reach truck, pallet truck)? This mobile battery charging station offers the solution. Why this charging station? Freely movable – the station can be easily moved away from the wall and stands completely independently in the space during charging. Extra fire safety – in the unlikely event of a fire, the station can be easily and quickly moved away. Cables remain intact – the charging cables never touch the ground, preventing damage to plugs and cables and extending their lifespan. Flexible layout – place 1 conventional charger or 2 high-frequency chargers in the station. Durable finish – the steel charging station has a powder coating for a strong, scratch-resistant appearance. Available in 3 versions, external dimensions (L x W x H): • Standard: 790x590x1150mm • XL: 990x790x1500mm • XL with Platform: 990x790x1500mm (Platform height: 500mm, measured from the ground) Prices available upon request. Free delivery within the Netherlands. What do you get? Each charging station is delivered fully assembled, including 1 balancer and 1 tension strap. Excluding the installation of the battery chargers. Battery is not included. Ideal for: Warehouses, distribution centers, and companies that use forklifts or other electric equipment and are looking for a safe, organized, and fire-resistant charging solution. Hjdpfx Akszq U H Doiow To place an order, request price information, or for more information, please contact us via our email address.

Condition: used, This listing is for a Tecan Genesis 150 2002 Liquid Handling Station - SPARES ONLY Hsdsxzg I Uepfx Akijw

Condition: used, Jungheinrich charging station for forklifts 4 x charging station, maintenance stand for battery maintenance If you use electric forklifts in your operations, they rely on accumulators or batteries as their energy source. By installing a battery charging station, you will benefit from a compact solution that significantly simplifies the charging of accumulators. The system serves as a charging station for forklifts (such as lift trucks). It has four charging stations with Tecna spring balancers to hold the charging cables in position. Construction: The yellow steel structure consists of a metal frame with an integrated crash barrier on the floor to protect the system from damage by vehicles. Spring balancers are mounted on top to enable ergonomic handling of heavy cables. Jungheinrich battery charging station for floor mounting Year of manufacture: 2023 Without chargers Hedpfoy Nx Hnsx Akiew “Everything from one source: We would be happy to offer you suitable bank financing for your project.” You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, Heidelberg, station BUH 66-4, year of manufacture 2007. Optional: window frame pocket + sensor, light barrier, and ACC 2.4 control unit. Hodpfxjz I Tzls Akisw

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 2.2 kW (2.99 HP), Type GFE 2.2 Year of manufacture: 2006 Hjdpfx Akexhdy Ijisw Power: 2.2 kW Includes accessories PRICE REDUCTION FROM 1250 TO 950 EUR!!!

Condition: used, Year of construction: 2001, Seed station Kemper 800 mm Year of manufacture: 2001 Hedpfxjz A Skue Akisw Condition: refurbished Suitable for integration into production lines with a working width of up to 800 mm Standalone machine with its own control cabinet Adjustable spreading rate Adjustable spreading duration Return conveyor for unused seed Extendable mesh belt Humidification and seeding can be switched off Pressure rollers at the inlet and outlet with adjustable pressure height Turning station after humidification Includes 1x spreading container and 1x extendable mesh belt