Used Dosing Station for sale (5,943)

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator Nlodpou D E A Djfx An Ijd - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Njdpfx Aoibx S Nen Iold Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Nsdpfoh Akm Tsx An Ijld

Condition: new, DOPAG Micromix Nledpfexcgpzox An Ijd The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Njdpfjyb Tw Rsx An Ijld Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: used, KMA Heat Exchanger and Pumping Station Nsdpeym Dx Aefx An Isld

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Nlodpfx Anjxzq Dto Ied

Condition: good (used), Mega Normlicht 98 Control Station with Drawers Ideal as a control panel for a printing machine. 230V power supply Nsdpfxjzlah Aj An Isld 4 drawers + bottom shelf Drawer size: 91x66cm Desktop size: 100x66cm

Condition: used, Year of construction: 2019, functionality: fully functional, 400 kVA transformer station, year of manufacture 2019, station UK220-2.9X, transformer DOTUL400/10, year 2013, oil-cooled transformer, 10kV ±2x2.5%/400V, with HV plug-in bushings AK, with LV porcelain bushings, pointer thermometer. Nlsdpfexzq Hbjx An Ied

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Nledpfx Ansx R Df Se Iod Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Nledox R Dh Hepfx An Ied Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Nljdpfx Asv Abm Ejn Ijd Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Njdpfoyil A Sox An Ield

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Nodpfxovz H N No An Ield Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: good (used), Just Normlicht Proof Control Station Nsdpfx Anew Ed S Is Isld Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity).

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. 5. Compact Design: Nsdpfx Anoq Nxpgo Ield - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments.

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Nedpfody Hqvox An Ield Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Nsdpfxsb Tmrvo An Iold Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. Nedpfx Ansdzc Rfs Ijld A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Nsdpfx Ajzn H D Njn Ijld Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2010, For Sale: Raw Material Dosing System Brand: AZO Year of manufacture: 2010 Included: - 8x dosing tank 500 liters - complete documentation - frames - load cells - dosing screws Nedjy Spg Rjpfx An Ield If you have any questions or comments, please feel free to contact us. Inspection is possible on site. Best regards, Leo Holland

Condition: used, Year of construction: 2016, For Sale: Njdjzlt S Ijpfx An Iold Complete TU premix bunker installation with accessories. Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. The installation can be viewed on-site.

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Nsdjvpv Nuspfx An Ijld

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Nledjmck Ryspfx An Ijd Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg Nodeutuyiepfx An Ield