Used Operating Resolution for sale (30,243)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,068 h, load capacity: 4,000 kg, lifting height: 3,240 mm, construction height: 2,300 mm, fork length: 2,400 mm, TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 3,240 mm Overall height: 2,300 mm Fork carriage: 3A Fork length: 2,400 mm MACHINE DETAILS Mast: Standard (2W324) Drive: 6-cylinder diesel engine Engine: EBT-GK45-3B Transmission: Automatic Dimensions and weight Nodpfszvuy Uex Aqwoda Dimensions (L × W): 3,100 × 1,400 mm Dead weight: 5,080 kg Front tires: 8.25-15, 70% tread Rear tires: 7.00-12, 60% tread Operating hours: 7,068 h EQUIPMENT Flashing beacon Reverse warning device Blue light at the rear Load guard

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 5,710 h, load capacity: 1,500 kg, lifting height: 5,500 mm, free lift: 1,870 mm, fuel type: gas, mast type: triplex, construction height: 2,405 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 5,500 mm Nedpfxszu Nkre Aqweda Free lift: 1,870 mm ISO class: 2 (1,000–2,500 kg) MACHINE DETAILS Mast type: Triplex Drive type: Internal combustion engine Engine power: 38 kW Operating voltage: 12 V Overall height: 2,405 mm Weight: 3,010 kg EQUIPMENT Partial cabin Side shifter 3rd hydraulic valve

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 11,069 h, load capacity: 2,000 kg, lifting height: 4,765 mm, free lift: 1,630 mm, mast type: triplex, construction height: 2,170 mm, fork length: 1,000 mm, TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,765 mm Overall height: 2,170 mm Free lift: 1,630 mm Fork carriage: 2A Nedpfxezvuzxe Aqwsda Fork length: 1,000 mm MACHINE DETAILS Mast: Triplex (3F476) Drive: 4-cylinder diesel engine Engine: VW BEF Dimensions & Weight Dimensions (L x W): 2,300 x 1,170 mm Own weight: 3,336 kg Front tires: 200/50-10, 10% Rear tires: 18 × 7-8, 10% Operating hours: 11,069 h EQUIPMENT Seat with seatbelt Load guard Flashing beacon Blue warning light (rear) Rearview mirror Mini-lever Direction switch in the armrest

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 8,198 h, load capacity: 1,400 kg, lifting height: 8,300 mm, free lift: 2,750 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 8,300 mm Overall height: 3,300 mm Free lift: 2,750 mm Fork carriage: FEM 2A Fork length: 1,150 mm MACHINE DETAILS Mast: Triplex (3F830) Drive: Electric, 48 V Battery: 48 V Ndedpjzvu Ilofx Aqwja Dimensions and weight Dimensions (L × W): 1,800 × 1,280 mm Own weight: 3,721 kg Tires: BA Operating hours: 8,198 h EQUIPMENT Dual pedal control Joystick / Multipilot Fork carriage tilt Load guard 360° steering

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, construction height: 2,140 mm, fork length: 1,000 mm, TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,140 mm Overall height: 2,140 mm Free lift: 1,500 mm Nedpfxszvu Apj Aqwsda Fork carriage: 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Duplex (2F314) Drive: Electric Transmission: Impulse Battery: 48 V / 475 Ah, year of manufacture 2015 Dimensions & Weight Dimensions (L × W): 2,200 × 1,100 mm Own weight: 3,654 kg Front tires: 18 × 7-8, 40 % Rear tires: 16 × 6-8, 10 % Operating hours: 14,180 h EQUIPMENT Side shifter Note: Tilting function and side shifter are defective.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,655 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,500 mm, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,100 mm Overall height: 2,060 mm Free lift: 1,500 mm Fork carriage: 2A Ndjdjzvu Hbspfx Aqwea Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex (2F310) Drive: Electric Battery: 48 V / 625 Ah, manufactured in 2018 Charger: 48 V / 80 A, not tested Dimensions & Weight Dimensions (L × W): 1,900 × 1,070 mm Own weight: 3,150 kg Front tires: 18 × 7-8, 80% tread Rear tires: 15 × 4.5-8, 40% tread Operating hours: 14,655 h EQUIPMENT Driver restraint system Mini-lever Dual-pedal drive control Panoramic mirror Rear blue light Transponder ignition switch Integrated side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,045 h, load capacity: 1,200 kg, lifting height: 2,000 mm, mast type: duplex, construction height: 1,420 mm, fork length: 1,150 mm, TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,000 mm Overall height: 1,420 mm Fork length: 1,150 mm Double pallet/base lifting capacity: 2,000 kg at 600 mm MACHINE DETAILS Mast: Duplex (2W200) Drive: Electric, 24 V Battery: 24 V / 500 Ah, year of manufacture 2018 Dead weight: 1,588 kg Front tires: 2 × BA Rear tires: BA Operating hours: 7,045 h EQUIPMENT Double pallet function Ndjdpozvu Daofx Aqwea Base lifting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 11,799 h, load capacity: 3,000 kg, lifting height: 4,950 mm, free lift: 1,520 mm, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,950 mm Overall height: 2,270 mm Free lift: 1,520 mm Fork carriage: FEM 3A Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex (3F495) Drive: Electric Battery: 80 V / 620 Ah Charger: 80 V / 120 A, not tested Dimensions & Weight Dimensions (L x W): 2,450 x 1,250 mm Own weight: 5,802 kg Front tires: 23 × 10-12, 10% tread Rear tires: 6.50-10, 80% tread Ndsdozvu Ixjpfx Aqwea Operating hours: 11,799 h EQUIPMENT Blue light (front) Blue light (rear) Multipilot Panoramic mirror

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,503 h, load capacity: 6,000 kg, lifting height: 3,400 mm, construction height: 2,880 mm, fork length: 1,200 mm, The following items were renewed during the overhaul: new seat with seatbelt engine cleaned and dried forks in new condition new chains new hoses new hose reel new floor mat oil and filter change performed TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 3,400 mm Overall height: 2,880 mm Fork length: 1,200 mm Njdpozvuyzsfx Aqwoda MACHINE DETAILS Mast: Standard (2W340) Drive: 6-cylinder diesel engine Engine: Deutz TCD 4.1 L4 Dimensions & Weight Dimensions (L × W): 3,450 × 1,600 mm Dead weight: 11,250 kg Front tires: 355/65-15, 100% Rear tires: 250-15, 40% Operating hours: 6,503 h

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Ndedpfx Aqeyb Tw Rowoa Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Ndodpszrnhwjfx Aqwoa Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Nedpsyug Rqefx Aqwjda Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Ndedpexyungefx Aqwoa Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND. Highlights include: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller, - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport unit AFC (135/240), Njdjzmh Awspfx Aqweda - 7 paper magazines. Inspection and test printing are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Printing capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film transport unit - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fixer/regenerator - Accessories by arrangement. Condition: The system comes from a well-known photo specialist store for high-quality lab work and photos. It was used until the business closed (April 2026) and was regularly maintained (most recently in 2023). It is in good condition. A total of 1,204,236 images have been printed, of which 11,255 were black and white and 7,367 were index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because the owner is closing the business due to retirement. Loading can be supported if required and by arrangement. Transport and installation must be organized by the buyer. If you have any questions or are interested, we look forward to hearing from you. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers of used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h Nedpfxjzr Nmbj Aqweda EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TCGL32-190048, number of ink cartridges: 6, color channels: 5, number of print heads: 6, total width: 3,200 mm, type of input current: three-phase, input current: 10 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: D-Gen H12 Printer Combined with Klieverik Calender Nedpfx Aqszrgfnewoda We are offering our D-Gen H12 printer together with a Klieverik calender for sale. Both machines are fully operational and available for viewing until August 13 at our location in Roeselare. D-Gen H12 Printer Highlights: Industrial-grade 3.2-meter wide roll-to-roll printer Printing speed up to 132 m²/h with 12 Ricoh Gen5 print heads High resolution up to 2400 dpi Uses disperse inks suitable for textile printing Advanced features including a powerful drying system, dust removal, and precise tension control for high-quality fabric prints Supports multiple ink colors for vibrant and clear prints Compatible with software such as Ergosoft, Caldera, Wasatch, and Onyx Klieverik Calender: Reliable calender machine from Klieverik, The Netherlands Industrial quality with specifications around 10 kW power, 400V, and 50/60 Hz operation Well-maintained and fully functional The reason for selling these devices is our investment in a new 5-meter dye-sublimation printer to expand our production capabilities. For inquiries, additional details, or to schedule a viewing, please contact us.

Condition: used, This listing is for Fujifilm FLA5100 High Resolution Image Analyser Ndsdpfx Aqozltk Dewea The unit is in full working condition and ready for immediate use This state-of-the-art scanner provides high-performance biomolecular imaging. It features multi-wavelength laser excitation for precise fluorescence and radioisotope detection. [[1]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laborator

Condition: excellent (used), Year of construction: 2018, Ref:11138 . 2018 Horizon CRF-362 Creaser-Folder High speed automatic creasing / folding machine designed for both digital and offset printers to crease & fold digitally printed, heavyweight or cross-grained stock in one pass. Avoiding cracking of digitally-printed stocks. Quick and easy set-up and operation is performed through the high resolution colour touch screen. Suitable for creasing covers, restaurant menus, shop cards, invitation cards and laminated sheets. Preparing Perfect Bound Book Covers – sharp, high quality creasing prepares the spine, hinge and flap by selecting up or down creasing. High Quality Folding – two fold knives for high quality folding, even on heavy stocks. 6 different folding patterns can be set up simply by using the icon based touch screen. Specification: Maximum sheet size 364 × 865 mm Minimum sheet size 105 × 180 mm Feeding system Air suction feed belt Feeder pile height 150 mm Normal paper – crease & fold 80–350 gsm Normal paper – crease only 80–400 gsm Coated paper – crease & fold 105–350 gsm Coated paper – crease only 105–400 gsm Laminated stock – crease & fold 0.2–0.4 mm Laminated stock – crease only 0.2–0.5 mm Maximum crease lines 10 per sheet Creasing direction Positive / negative (up or down) Ndjdpezu Divefx Aqwea Folding system 2 knife-fold units Speed: Up to 4,500 sheets/hour

Condition: good (used), Here we offer you a Stäubli robot. Stäubli robot with control unit and operating panel. The Stäubli RX130 is a fast and precise medium payload robot (max. 12 kg) with a maximum arm reach of 1360 mm. It is suitable for machine tending, painting, cleanroom, life sciences, and pharmaceutical applications. Ndsdpfxszditto Aqwsa The RX130 robot is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom for maximum flexibility. The spherical working envelope of the robot enables optimized use of the robot cell. It can be mounted on the floor or ceiling. The 6-axis RX130 offers high-resolution servos with absolute calibration and a fully enclosed structure, ideal for applications in harsh environments. 3x400V-50/60Hz-5500VA Weight 260kg Type: Stäubli CS7 RX130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed via email or fax.

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications Njdpfx Aqsxlknmswsda • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Ndodpfx Aqszu Ixnjwea Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Njdpfx Aqszl Uzwjwoda Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm Ndjdpfxjy Tp Hgs Aqwea - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, KEYENCE VHX-X1 Digital Microscope | Year of Manufacture 2025 | Like New | Manufacturer's Warranty For sale is a like-new KEYENCE VHX-X1 digital microscope complete system from the current generation of devices. The system was delivered and put into operation in December 2025 and is in excellent technical and optical condition. The manufacturer's warranty is still valid. The new price of the offered configuration is over €103,000 net. The system is suitable for quality assurance, failure analysis, material testing, research and development, reverse engineering, incoming goods inspections, and production-accompanying controls. The combination of high-resolution imaging, automated focusing, motorized XY stage, and integrated 3D profile measurement provides a complete system that is immediately ready for use. Scope of delivery KEYENCE VHX-X1 microscope unit VHX-AX1D control console OP-88885 computer unit VHX-7100 camera unit VH-Z00T objective lens High-performance objective lens VH-Z100 with a magnification range of 100x to 1000x Motorized precision stand VHX-S770E Large motorized XY specimen stage VHX-H6M software module for 3D profile measurements Ring light and illumination adapter OP-88164 Manufacturer's documentation Original accessories Nedoza Tpkspfx Aqweda Special features Current KEYENCE VHX-X1 generation Year of manufacture 2025 Delivery and commissioning in December 2025 Very little use Manufacturer's warranty available Magnification range up to 1000x Motorized XY stage Motorized swivel head 3D profile measurement included Panorama and stitching function Immediately ready for use No additional investments required Typical applications Metallography Material testing Surface analysis Failure analysis Weld seam inspection Plastic analysis Electronics testing Quality control Research and development Condition Like new Fully functional Very little use Demonstration possible Inspection and functional demonstration by appointment. We will gladly provide further photos, serial numbers and technical information upon request. Availability: immediate Location: Ahrensburg near Hamburg

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Ndjdpfx Aqszt Si Uewja Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Simultaneous machining via 2 handwheels