Used Operating Resolution for sale (24,710)

Condition: excellent (used), Year of construction: 2010, Ref:11014 . 2010 Palamides Alpha 500 Plus Presser/Stacker Mobile delivery system, fully automatic for production of pressed & counted bundles of folded leaflets or stitched brochures. Products can be handled in a shingled stream or single sheet operation. Suitable for inline processing of up to 3-up products. Features: Variable height infeed (40 – 105 cm) Double pressing station with air-removing rollers PLC controlled counting of the stack with jogging Completed stacks can be ejected to the left or right. Mobile unit, can be quickly moved from one machine application to another. Specification: Formats: 1-up use, Max: 510 x 330 mm 2-up use, Max: 235 x 330 mm 3-up use, Max: 150 x 330 mm Min: 90 x 120 mm Bundle height, Min: 10 mm Max: 160 mm Performance : 900 bundles per hour per up-work. Speed : 15-200 m/min. Iiedpfx Aoxd U Twoacjh Air consumption : 100 ltr./min. net 6 bar.

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz Isdpfst Uc Iqsx Aacjih

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Elgo, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 8 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 12,000 kg, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, 2021 MVD B13-3100 Guillotine Shears with Elgo P40T Control – Very Good Condition For sale is a 2021 MVD B13-3100 Hydraulic Guillotine Shear, equipped with the advanced Elgo P40T CNC Control. This machine is in very good condition, having been installed in 2021. The MVD B-Series shears are built for precision, productivity, and reliability, offering powerful hydraulic cutting performance with CNC-controlled accuracy. Perfect for fabrication shops, subcontractors, and sheet metal production. Machine Make: MVD Iijdpfx Ajxddzqoaceh Machine Model: B13-3100 Machine Type: Hydraulic Guillotine Machine Capacity: 3m x 13mm Machine Year: 2021 ✅ Key Features 3100 mm cutting length – handles large sheet sizes with ease 13 mm sheet capacity (mild steel) – robust heavy-duty performance Elgo P40T CNC Control – programmable backgauge, stroke, and cutting settings Hydraulic swing beam design – consistent and accurate cutting results CNC backgauge system with motorised adjustment Rugged welded frame for stability and precision Front sheet supports and squaring arm for operator convenience Safety light guards for operator protection Very Good condition – 2021 model, very low hours 📐 Technical Specifications – MVD B13-3100 Guillotine Shears Cutting Length: 3100 mm Capacity (Mild Steel): 13 mm Capacity (Stainless Steel): ~8 mm Backgauge Travel: 1000 mm (CNC controlled) Control: Elgo P40T CNC touchscreen – programmable stroke, backgauge, cutting angle Stroke per Minute: 8–20 (adjustable) Cutting Angle: 0.5°–2.5° adjustable Throat Depth: ~100 mm Main Motor Power: 22 kW Hydraulic System: High-pressure precision hydraulics Dimensions (L×W×H): ~4000 × 2200 × 2100 mm Weight: ~12,000 kg 🌍 Condition Year of Manufacture: 2021 Control: Elgo P40T CNC Model: MVD B13-3100 Condition: Very Good – lightly used Ready for inspection and immediate delivery 🔑 Summary This 2021 MVD B13-3100 Hydraulic Guillotine Shear with Elgo P40T CNC Control offers 3100 mm cutting length, 13 mm capacity, and CNC accuracy. A modern, reliable, and powerful sheet metal cutting solution ideal for fabrication, subcontracting, and production facilities.

Condition: used, Used BCH stainless steel jacketed sigma mixer / extruder. Approximate working capacity 100 litre (product dependent) with maximum total capacity 250 litre. 304 Stainless steel mixing chamber measures approximately 720mm Long x 780mm Wide x 700mm Deep. Internal rated 100 mbar (90% Vacuum) design pressure at 150 deg.c. External 304 stainless steel jacket rated 6.8 bar design pressure at 170 deg.c. Has (2) 304 stainless steel Sigma blades driven by (2) 4kw motors with gearboxes. 304 Stainless steel screw discharge driven by 4kw motor with gearbox. Unit air operated hinged lid. Includes control panel. Iiodpfx Aaexdw Ikocjh

Year of construction: 2019, operating hours: 325 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: BL 6000000, TRIVENTEK BL60 DRY ICE BLASTING MACHINE Includes 6 m blast hose + ice gun (applicator). Nozzle box and special ice splitter nozzle included. 325 operating hours Machine in good condition, immediately ready for use. Worldwide Shipping. Iisdpfjxnl Akjx Aacoh Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dryice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Servicing and repair of Cold Jet dry ice machines

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Iijdpfxoxhgk Ae Aacjh Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Year of construction: 2023, condition: like new (used), The Redpack P325 Series flow wrapping machines are industry leading horizontal flow wrappers. These robust flow wrappers are designed to be extremely versatile, built to run a wide range of bottom-seal flow wrapping applications. Speed 200 packs / min The Redpack P325E flow wrapping machine has a three-axis electronic drive system. A user-friendly HMI touch-screen works with simple commands for operators to enter product parameters for quick change-overs. The Redpack P325E flow wrapping machine has an advanced three-axis servo drive and Allen-Bradley PLC (Programmable Logic Controller) control system. This flow wrapper has a 10.3" HMI color touch screen that displays simple commands for operators to enter product codes and settings. The HMI also provides machine diagnostics, and is capable of management data collection and communication with other plant and equipment. Features Iodpfxsxaxqlo Aacjih Equipped with independent drives synchronized through the servo-control system. Machine base is manufactured from solid stainless steel. Multi-pitch position infeed to accommodate wide range of products. Independent temperature control of the welding jaw heaters. Universal integrated holder for a thermal transfer printer, optional. Integrated label applicator optional. Modem for remote control and machine diagnostics for the fastest response.

Condition: used, This listing is for a Belimed PST 9-6-12 HS1 Steam Sterilizer. The unit is in excellent working condition and is ready for immediate release. The Belimed PST 9-6-12 HS1 is a top-of-the-line pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. This advanced stainless steel sterilizer supports the 6050 and 6065 sterilization processes with integrated Filter Integrity System (FIS), ensuring reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science and manufactured in Germany, this system delivers high process reliability, precise temperature control, and full compliance with GMP/cGMP standards, making it ideal for use in research, pilot, and GMP production settings. This HS1 configuration features a single-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. Key Features GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) Integrated Filter Integrity System (FIS) for monitoring and verifying sterilization filter integrity User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix Water-jacket cooling and vacuum drying ensure rapid cooling and effective drying of chamber loads Single-door HS1 configuration optimized for ergonomic loading and unloading High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) Automated operation with redundant sensors and independent measurement circuits for reliable sterilization Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration Technical Specifications Manufacturer: Belimed Life Science (Germany) Model: PST 9-6-12 HS1 Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) Filter Integrity System (FIS): Yes Chamber Dimensions (W × D × H): 1030 × 600 × 1380 mm Usable Chamber Volume: 710–850 L External Dimensions (H × W × D): 1940 × 2150 × 1710 mm Weight: Approximately 1,010 kg Chamber Material: AISI 316L Stainless Steel Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) Ijdpfx Aaexmi Hqocsih Door Type: Single-door HS1 Loading Type: Ground loader (GR) Cooling System: Water-jacket cooling Vacuum System: Integrated water-ring vacuum pump with optional water recovery Control System: B-Touch interface with PLC Electrical Supply: 400 V / 50 Hz (other voltages optional) Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options Year of Manufacture: Available on request Serial Number: Available on request Applications Sterilization of laboratory glassware, stainless steel equipment, and porous loads in biopharmaceutical production Small- to medium-scale pilot manufacturing with validated sterilization cycles GMP production environments requiring full regulatory compliance Sterilization of equipment used in vaccine, gene therapy, and biologics research Microbiology laboratories for culture media, instruments, and consumables Benefits Scalable and reliable for pilot and full production batches Validated sterilization with integrated FIS and redundant sensors ensures reproducible cycles High-...

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESA, controller model: S660W, bending force (max.): 175 t, working width: 3,700 mm, stroke length: 210 mm, throat depth: 410 mm, distance between stands: 3,200 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, type of crowning: motor-driven, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, overall weight: 9,800 kg, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery Iiedpsxddw Ejfx Aacjh 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake.

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand ESAB Model Vision 51 Main Drive Number of axis 2 Iedpfx Ajxn Dkteacsih This ESAB Eagle 2000 plasma cutting machine was manufactured in 2007. It features a custom-built 2000 x 4000 mm cutting table and is equipped with an ESAB M3 plasma system capable of handling plate thicknesses up to 30 mm in carbon steel. The ESAB Vision 51 CNC controller enhances operational efficiency with a user-friendly interface. Consider the opportunity to buy this ESAB Eagle 2000 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: used, Year of construction: 2012, operating hours: 6,664 h, Type of fuel: Electric Empty weight: 4.555 kg Dimensions (LxBxH): 230 x 120 x 247 cm Lifting capacity: 2.500 kg Lift height: 385 cm Clearance lift height: 190 cm Fork dimensions: 1.200 x 1.100 mm - Lifting capacity: 2500kg - Lifting height: 3850mm - Overhead clearance: 2470mm - Free lift: 1900mm - Fork length: 1200mm - Maximum fork width: 1100mm - Minimum fork width: 300mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Free-lift, Non-marking tires, Work lights - Mast: Duplex - Drive: Elektric - Brand/Type: 4PZS620 - Battery year of construction: 2012 - Capacity: 620Ah - Battery voltage: 80V - Year: 2012 - Documentation available: No - CE marking present: Yes - Serial number: 516321C00873 - Operating hours: 6664 - Transport dimensions: 2300mm x 1200mm x 2470mm (l x w x h) - Transport weight [kg]: 4555kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iedpfxoxpht Ue Aaceih Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 10651847 / 10651854, REF: MM6188 1 X Bizerba weigh-price system with touch-screen controls. Technical specification ⚙️ ✅ Manufacturer - Bizerba ✅ Country of Manufacture: Made in Germany ✅ Model - GLP-W & GLP. ✅ Date of manufacture – 2010. ✅ Serial no. (GLP-W) – 10651847 & (GLP) – 10651854. ✅ Weighing platform - 500mm x 400mm.  ✅ Weighing range - 40g up to 30 kg.  ✅ Electrical requirements - 230 V / 50 hz / 1 phase.  ✅ Overall dimensions - 840mm long x 650mm wide x 1465mm high. GLP-W Data Plate ✅ Maximum Weighing Capacity (Max): 6 / 15 / 30 kg (Indicating a multi-interval scale) ✅ Minimum Weighing Capacity (Min): 40 g ✅ Verification Scale Interval (e): 2 / 5 / 10 g ✅ Tare Maximum (T=): Max1 / Max kg ✅ Electrical Supply (Voltage): 230 V ✅ Frequency: 50 Hz ✅ Nominal Operating Current: 0.65 A ✅ Fuse Rating (T): 3.5 A ✅ Manufacturing/Approval Codes: CE 10, D00-09-021, 0103 GLP Data Plate ✅ Voltage: 230 V ✅ Frequency: 50 Hz ✅ Nominal Operating Current: 0.65 A Iodpfexhdqysx Aacjih ✅ Fuse Rating (T): 3.5 A *Please note* - Requires software update before ready for production.

Condition: used, Year of construction: 1999, functionality: fully functional, Merkle Slitting and Sheeting [Cross Cutting] Machine Type MSS 1450 V S/N MSS 464/99 3 Phase 1.3kW power for 3 electric motors Longitudinal cutting of materials up to 2-3mm thick – has been used to slit TPU up to 300 microns thick for 25 years Iisdpfxoxgpdis Aacsh Requires air compressor to operate Spare blades/knives also part of package Size: 220cms W x 290 cms D x 122 cms H Instruction manual with technical drawings also provided Serviced regularly – in working condition Available for purchase. Owned from new – bought 1999

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, AVAILABLE ONLY DUE TO FACTORY CLOSURE An excellent condition very powerful 75Kw granulator, with a special blade configuration ( HOG) to manage large lump materials without in most cases, need for cutting or a shredder. Maintained by Owner / engineer to high standard and was considered one of the best granulators in his factory. This offer comes with a large bandsaw to pre-cut any oversize, rare earth magnet on the output, followed by a fines separator, electronic s+s metal detection and removal equipment. Kongskilde fan, cyclones and pipework complete the running system. Spare screens and spare Blades enable immediate start up for buyer. Electric mains isolators and control panel included so only needs one conenction into the board to commence operation. Truly a "plug and play" granulation line. Price includes loading to buyers transport. delivery can be arranged at cost. Iedjwqxwcepfx Aacjih

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92552, working width: 230 mm, planing height: 120 mm, working height: 120 mm, spindle diameter: 40 mm, power of feed motor: 1,500 W, 🪚 2001 Weinig Quattromat 23P Planer Moulder – Industrial Performance in Very Good Condition Now available for sale: a 2001 Weinig Quattromat 23P, one of the industry’s most reliable and compact 4-sided planing and moulding machines, ideal for workshops producing mouldings, profiles, cladding, architraves, and more. This unit is in very good condition, fully operational, and perfect for businesses looking to increase productivity with a trusted European-built planer moulder. ✅ Key Features – Weinig Quattromat 23P Year of Manufacture: 2001 Condition: Very Good – well-maintained, and ready to run Working Width: 13 to 230 mm Working Height: 6 to 120 mm Number of Spindles: 4 Spindle Diameter: 40 mm Spindle Speed: 6,000 rpm Feed Speed: Variable up to 20 m/min Power: Approx. 21 kW combined spindle power Infeed Table: 1,800 mm Pneumatic Pressure System: For consistent timber hold-down Digital Readouts: For quick and accurate spindle positioning Straightening spindle motor: 4 - 7.5 KW (5.5 - 10 HP) Vertical spindles motor: 5.5 - 11 KW (7.5 - 15 HP) Top spindle motor: 4 - 11 KW (5.5 - 15 HP) Feed motor: 1.5 KW (2 HP) Spindle speed: 6,000 rpm Spindle diameter: 40 mm Tool cutting circles of moulding spindles: 125 - 200 mm Adjustment range of spindles (axial): 30 mm Adjustment range of straightening spindle: 5 mm Feed speed: 8 m/min. Feed roller diameter: 140 mm Feed roller width: 2 x 50 mm Iijdpfxownr Enj Aaceh Width of roller in the outfeed table: 50 mm Adjustment range of straightening table and edge-jointing fence: 10 mm Height of right fences: 60 mm Length of straightening table: 2 m Reference engraver with cutter: Yes Pneumatic pressure for feed rollers: Yes Pneumatic adjustment of infeed roller in front of 1st bottom spindle: Yes Pressure roller from above and left in front of machine infeed: Yes 🛠️ Machine Capabilities 4-sided planing for smooth and dimensionally accurate timber Profile moulding (e.g. tongue & groove, chamfering, rebating, etc.) Batch production of window, door, or cladding components Compact footprint – ideal for smaller workshops or mobile production lines Easy spindle access and minimal setup time 📦 Included with Machine Weinig Quattromat 23P base unit Dust extraction ports Original manuals and operator instructions Fully tested, serviced, and ready for production 🪵 Perfect For: Joinery workshops Timber frame manufacturers Furniture makers Shed and fencing producers Custom millwork and architectural moulding shops 📍 Availability & Delivery The machine is in stock now and available for immediate inspection and dispatch. We offer delivery across Ireland, UK and Europe. 📞 Contact Us Today Boost your timber processing capabilities with this robust and accurate Weinig Quattromat 23P. Weinig Quattromat 23P for sale Used Weinig planer moulder in very good condition 4-side planer moulder woodworking machine Industrial wood planer for moulding production Compact planer moulder for small workshops Weinig planing and profiling machine UK / Ireland / Europe Second-hand Weinig machinery for woodworking

Condition: good (used), mileage: 788,201 km, power: 235 kW (319.51 HP), first registration: 04/2015, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 315/80R22,5, fuel: diesel, wheelbase: 5,320 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,440 mm, loading space length: 8,880 mm, loading space height: 2,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, - Digital tachograph - Electric windows - Electric mirrors - Trip recorder (control device) - Short cab - Tail lift Number of axles: 3, Configuration: 6x2, Unladen weight: 12,845 kg, Gross weight: 27,500 kg, Total fuel tank capacity: 450 liters, Suspension type: Air suspension, Cab type: short cab, Cruise control, Trip recorder (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: halogen, Bluetooth, Engine power: 235 kW (315 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Manufacturer transmission: Scania, Gears: 12, Power steering, ABS, ASR, Starter battery, Seat arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual, Refrigeration unit manufacturer: Frigo Block, Refrigeration unit model: FK 13, Refrigeration unit: electric, Aggregate operating hours (electric): 12,426, Heater, Wall thickness: 45 mm, Cooling type: freezer, Day/night cooling: day/night cooling, Tail lift, Tail lift version: tuck-under tail lift, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia DHSM.30, Tail lift material: steel and aluminium, Tail lift dimensions: 202 x 240 Transmission Transmission: SCA, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Axle 1: steered; left tyre tread: 11 mm; right tyre tread: 9 mm; suspension: leaf spring Axle 2: twin tyres; left inner tread: 9 mm; left outer tread: 9 mm; right inner tread: 10 mm; right outer tread: 10 mm; suspension: air suspension Axle 3: lift axle; steered; left tyre tread: 9 mm; right tyre tread: 9 mm; suspension: air suspension Dimensions Dimensions (L x W x H): 1,120 x 260 x 390 cm Weights Unladen weight: 12,845 kg Payload: 14,655 kg Gross vehicle weight: 27,500 kg Functional Tail lift: Dhollandia DHSM.30, tuck-away flap, 3,000 kg Loading platform height: 124 cm Refrigeration unit: electric (12,426 operating hours) Wall thickness: 45 mm Maintenance APK (main technical inspection): valid until 12/2025 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Easy! • Large, rapidly changing stock • Recognizable quality • Good prices • Correct business dealings • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. ... Iedpfsxnit Hex Aacsih

Condition: used, Year of construction: 2020, operating hours: 3,415 h, Type of fuel: Electric Empty weight: 3.150 kg Dimensions (LxBxH): 200 x 115 x 225 cm Lifting capacity: 1.600 kg Lift height: 528 cm Clearance lift height: 173 cm Fork dimensions: 1.200 x 800 mm - Lifting capacity: 1600kg - Lifting height: 5280mm - Overhead clearance: 2250mm - Free lift: 1730mm - Fork length: 1200mm - Maximum fork width: 800mm - Minimum fork width: 0mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Free-lift, Work lights, Non-marking tires - Mast: Triplex Iiodpfx Ajxpht Isacjh - Inspection valid until: 01.2026 - Drive: Elektric - Brand/Type: 05 EPZS 0625 SC - Battery year of construction: 2020 - Capacity: 625Ah - Battery voltage: 48V - Year: 2020 - Documentation available: No - CE marking present: Yes - Serial number: 516221X01295 - Operating hours: 3415 - Transport dimensions: 2000mm x 1150mm x 2250mm (l x w x h) - Transport weight [kg]: 3150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2001, The Seital SE 15 X Cream Separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key points about cream separators in general, and functions that may apply to the SE 15 X model: - Functionality: The main purpose of a cream separator is to enable the efficient extraction of cream from whole milk. This is essential for producing various dairy products. - Design: The SE 15 X model generally features a centrifuge mechanism that spins the milk at high speeds to separate the lighter cream from the denser skim milk. - Capacity: Cream separators can vary in capacity, indicating the amount of milk they can process in a given time. The SE 15 X is likely designed for small to medium-scale operations. - Materials: Usually made of stainless steel, which ensures hygiene and durability. These machines are designed to withstand regular use in dairy processing. - Easy Operation: Modern cream separators often come with user-friendly controls to adjust the separation process based on the desired cream content. - Maintenance: Regular maintenance is essential for efficiency. This includes cleaning the machine properly after each use to prevent any contamination. - Applications: Besides dairy farming, such separators are often used in cheese production or small-scale creamery operations. Usage: Cream Separator Capacity on Full Skimming : 3000 Litres/Hr Capacity on Standedisation: 5000 Litres/Hr Cream Separation: 0.03% Cram Regulation Valve: Included Tools: Included Controls: Supplied with New Control Panel Manuals: Included Condition: Serviced Electricals: 3 Phase 50/60HZ 400 V Ijdpfx Ajxhczdsaceih

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,067 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 20 m/min, nominal power (apparent): 30 kVA, controller manufacturer: Hurco, controller model: Ultimax, table width: 1,270 mm, table length: 610 mm, table load: 1,500 kg, overall weight: 7,300 kg, spindle speed (max.): 8,000 rpm, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, 2002 Hurco VMX42 3 Axis Machining Centre – Very Good Condition For sale is a 2002 Hurco VMX42 3 Axis CNC Machining Centre, equipped with the dual-screen Ultimax Control. This machine comes from a precision engineering environment, is in very good condition. The Hurco VMX series is known for rigid construction, fast cutting performance, and operator-friendly control, making it a reliable and cost-effective choice for toolmaking, production machining, prototyping, and subcontracting work. Machine Make: Hurco Machine Model: VMX42 Machine Type: 3 Axis Machining Centre Year: 2002 Control: Ultimax Dual Screen ✅ Key Features Dual-screen Hurco Ultimax CNC control – powerful conversational & NC programming Large machining envelope – ideal for medium to large parts High-performance spindle – versatile for steel, aluminium, plastics & composites 24-station automatic tool changer (ATC) Heavy-duty construction for accuracy & repeatability Very Good condition – ready for immediate use 📐 Technical Specifications – Hurco VMX42 X-Axis Travel: 1,067 mm (42") Y-Axis Travel: 610 mm (24") Z-Axis Travel: 610 mm (24") Table Size: 1,270 × 610 mm Table Load Capacity: 1,500 kg Spindle Taper: ISO 40 Spindle Speed: 8,000 RPM Spindle Motor Power: 18 kW (24 HP) Rapid Traverse (X/Y/Z): 24 m/min Cutting Feed Rate: Up to 20 m/min Tool Changer Capacity: 24 ATC, bi-directional carousel Tool Change Time (Chip-to-Chip): Approx. 6.5 sec Iisdpfx Aasxddi Uecsh Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm Machine Weight: ~7,300 kg 🌍 Condition Year of Manufacture: 2002 Control: Hurco Ultimax (dual-screen) Condition: Very good Ready for inspection and immediate delivery 🔑 Summary This 2002 Hurco VMX42 CNC Machining Centre offers excellent value for any workshop needing a rigid, accurate, and operator-friendly CNC mill. With its large travels, 8,000 RPM spindle, and Ultimax control, it is ideal for toolrooms, job shops, and batch production.

Condition: used, Year of construction: 2019, operating hours: 4,147 h, lifting height: 1,070 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 1,620 mm, total length: 1,700 mm, total width: 800 mm, color: other, Empty weight: 1.638 kg Lifting capacity: 1.000 kg Fork dimensions: 1.150 x 560 mm - Working level: Laag - Lifting capacity: 1000kg - Lifting height: 1070mm - Overhead clearance: 1620mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 560mm - Minimum fork width: 560mm - Options: Man-Up - Mast: Duplex - Drive: Elektric - Brand/Type: TC 5207-05 lithium lon - Battery year of construction: 2019 - Capacity: 260Ah - Battery voltage: 24V - Year: 2019 - Documentation available: No - CE marking present: Yes - Serial number: 615212V00232 Iiedpfx Ajxphtueacoh - Operating hours: 4147 - Transport dimensions: 1700mm x 800mm x 1620mm (l x w x h) - Transport weight [kg]: 1638kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request Iedpfxownidho Aacoih - Year: 2003 - Documentation available: Yes - CE marking present: Yes - Operating hours: 4428 - Control type: Siemens - Control: CNC - Travel X: 6500mm - Travel Y: 3300mm - Resonator type: 7XSE-60 - Power: 37.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2018, operating hours: 13,881 h, Type of fuel: Electric Empty weight: 5.646 kg Dimensions (LxBxH): 250 x 130 x 267 cm Lifting capacity: 3.500 kg Lift height: 413 cm Fork dimensions: 2.400 x 1.230 mm - Lifting capacity: 3500kg - Lifting height: 4130mm - Overhead clearance: 2670mm - Free lift: 0mm - Fork length: 2400mm - Maximum fork width: 1230mm - Minimum fork width: 500mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Full cabin, Non-marking tires, Work lights, Heating - Mast: Duplex - Drive: Elektric - Brand/Type: 5TPzS625 - Battery year of construction: 2024 - Capacity: 625Ah - Battery voltage: 80V - Year: 2018 - Documentation available: No - CE marking present: Yes - Serial number: H2X387J02470 - Operating hours: 13881 - Transport dimensions: 2500mm x 1300mm x 2670mm (l x w x h) - Transport weight [kg]: 5646kg Ijdpfxsxpglpo Aaceih - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2019, operating hours: 4,414 h, lifting height: 1,070 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 1,620 mm, total length: 1,700 mm, total width: 800 mm, color: other, Empty weight: 1.641 kg Lifting capacity: 1.000 kg Fork dimensions: 1.150 x 560 mm - Working level: Laag - Lifting capacity: 1000kg - Lifting height: 1070mm - Overhead clearance: 1620mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 560mm - Minimum fork width: 560mm - Options: Man-Up - Mast: Duplex - Drive: Elektric - Brand/Type: 4PZS620 - Battery year of construction: 2019 - Capacity: 620Ah Iisdpfxexn Sq Ij Aacsh - Battery voltage: 24V - Year: 2019 - Documentation available: No - CE marking present: Yes - Serial number: 615212V00228 - Operating hours: 4414 - Transport dimensions: 1700mm x 800mm x 1620mm (l x w x h) - Transport weight [kg]: 1641kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2008, operating hours: 16,087 h, Type of fuel: LPG Empty weight: 3.640 kg Dimensions (LxBxH): 250 x 120 x 218 cm Lifting capacity: 2.500 kg Lift height: 473 cm Clearance lift height: 160 cm Fork dimensions: 1.200 x 1.000 mm - Lifting capacity: 2500kg - Lifting height: 4730mm - Overhead clearance: 2180mm - Free lift: 1600mm - Fork length: 1200mm - Maximum fork width: 1000mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage - Options: Free-lift, Work lights, Non-marking tires - Mast: Triplex - Drive: LPG - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: FN369824 - Operating hours: 16087 - Transport dimensions: 2500mm x 1200mm x 2180mm (l x w x h) - Transport weight [kg]: 3640kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Iijdpfsxn Sqhox Aacoh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2018, operating hours: 9,131 h, Type of fuel: Electric Empty weight: 3.608 kg Dimensions (LxBxH): 200 x 115 x 225 cm Lifting capacity: 2.000 kg Lift height: 350 cm Clearance lift height: 178 cm Fork dimensions: 1.200 x 800 mm - Lifting capacity: 2000kg - Lifting height: 3500mm - Overhead clearance: 2250mm - Free lift: 1780mm - Fork length: 1200mm - Maximum fork width: 800mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Free-lift, Heating, Work lights - Mast: Duplex - Drive: Elektric - Brand/Type: 48V5HPzS625 - Battery year of construction: 2018 - Capacity: 625Ah - Battery voltage: 48V - Year: 2018 - Documentation available: No - CE marking present: Yes - Serial number: 516230J01373 Iisdpfx Asxn Sqbjacsh - Operating hours: 9131 - Transport dimensions: 2000mm x 1150mm x 2250mm (l x w x h) - Transport weight [kg]: 3608kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent