Used Operating Instructions for sale (25,710)

Condition: used, Siemens DESIGO PXM20-E Operating unit Data sheets and infomration ————— SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR034 Todpfxsxziaas Ahuof Listing name: SIEMENS PXM20-E Operating Unit

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,110 h, load capacity: 2,500 kg, lifting height: 3,680 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 560 Ah, battery voltage: 80 V, DGUV certified until: 11/2026, fork length: 1,100 mm, Equipment: UVV, cabin, front guard, lighting, sideshift, Still RX 60-25 Electric Forklift with the following specifications: Operating hours: 3,110 Lifting capacity: 2,500 kg Lifting height: 3,680 mm Overall height: 2,550 mm Year of manufacture: 2017 STILL 2.5-ton electric forklift with full cabin, telescopic clear view mast, side shifter, load guard, fingertip controls, single-pedal operation, lighting, fork length 1,100 mm, battery charger Sold as-is, without any technical or cosmetic reconditioning Since the machine is incoming, the following options are available at an additional cost: - New front and rear tires - Battery inspection, testing, and regeneration - Cleaning and cosmetic refurbishment - Service according to manufacturer’s specifications - Technical inspection (UVV or FEM 4.004 test) Further information about the unit is available by phone or email. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp trailer (transport costs on request). Todpfxjxvn Ilj Ahusf For more information and offers, please visit our website.

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Rotor diameter 368 mm with 40 knives Motor 22 kW Todpfx Asxyud Iohuef Only 850 operating hours

Condition: excellent (used), For sale: Original Ziegler FP 8/8 (DIN 14420) portable fire pump with the legendary Volkswagen air-cooled engine – 1192 cm³ displacement, 34 HP. ✅ Key specifications: • Manufacturer: Albert Ziegler Giengen/Brenz (Germany) • Model: FP 8/8 • Year of manufacture: 1974 • Engine: Volkswagen Type 122 – 1.2 petrol, 34 HP at 3600 rpm • Pump capacity: 800 l/min • Head lift: 80 mWS • Rated speed: 4000 rpm • Weight: 190 kg • Gear ratio: 1:1.45 • Operating hours: 16.3 h – practically like new! ✅ Condition & features: • The fire pump is complete and in fully original condition. • Nameplates and markings are intact. • The VW engine starts easily and runs smoothly. • Mobile design, easy to transport. • Ideal for a museum, collection, display, or as a reserve unit for a volunteer fire department. 🔥 Unique – VW Beetle engine in fire service! Volkswagen engines used in Ziegler pumps are highly valued today – reliable, easy to service, and collectible. 📦 Collection in person or transport upon arrangement. Todpfx Ahoxa En Rouef

Condition: like new (used), Year of construction: 2021, operating hours: 44 h, load capacity: 2,000 kg, lifting height: 1,724 mm, fuel type: electric, mast type: duplex, construction height: 1,390 mm, mileage: 44 km, AS GOOD AS NEW This 2021 Still electric DUO stacker is in excellent condition; Tedpfx Aexhdhxshuef Capacity: 2,000 kg; The stacker lifts up to 1,724 mm; Drive-through height: 1,390 mm; Equipped with INITIAL LIFT, making it ideal for uneven floors; ONLY 44 hours on the clock! The 2021 battery features an automatic filling system and an external charger; Schedule an appointment for a test drive. Watch the video on YouTube.

Condition: ready for operation (used), Year of construction: 2010, operating panel for Lisec machines Tjdpfxjl Dwrpj Ahuef

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2016, load capacity: 1,000 kg, fuel type: electric, gearing type: automatic, tire condition: 100 %, color: silver, vertical order picker for sale in mint condition with minimal operating hours CROWN LP 3500 vertical picking fork lift 6! operating hours CrownLP3520-1.0 year of manufacture: 2016 operating hours: 75h charger type: Filon Futur 24V 75A Nominal load at COG 1 t Wheel base: 1,285 m Transport length:2.88m Transport width:0.95m Transport height: 2.3 m Lifting height: 2.44 m Aisle Width: 1.4m Center of gravity: 600mm Traction engine: 1.5 kW Hoist motor: 2.5 kW Weight: 1,437 t Battery weight: 0.457 t Battery capacity:24/325V/Ah Travel speed with / without load: 9.5/5.9 km/h Tsdsh Ryrfspfx Ahujf Hoisting with / without load:0.12/0.16 m/s Lowering with load:0.22/0.17m/s Turning radius: 1,589 m

Condition: used, CNC control in operator panel / machine operating terminal Tsdpfx Aelb I D Tohuof CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions (WxHxD): 600 x 260 x 350 mm Weight: approx. 40 kg From a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal as a spare part donor.

Condition: good (used), Year of construction: 2008, Slow-running machine with walking floor. Rotor width 63 cm with 17 knives. 18.5 kW motor. Only 2500 operating hours. Tjdpfx Ahsxryf Ijuef

Condition: excellent (used), For sale: Professional Ziegler FP 8/8 Ultra Leicht fire-fighting portable pump (DIN 14420), manufactured in 1997 in Germany. This is a premium-class unit in the Ultra Leicht (Ultra Light) version, designed for easy transport and ergonomic operation. Technical specifications: • Model: FP 8/8 Ultra Leicht • Year of manufacture: 1997 • Rated output: 800 l/min • Rated pressure: 8 bar • Maximum output: 1030–1946 l/min • Rated speed: 4400 rpm • Gear ratio: 1:1 Engine: • 2-cylinder petrol engine, air-cooled • 12V electric starter • Reliable and easy-to-service construction Condition: • Original hour meter: 142 operating hours – very little use Tsdpexa Euqsfx Ahusf • Pump is complete, fully functional, and ready for operation • All gauges, indicator lights, and controls are fully operational • Control panel with operating instructions in German Applications: • Volunteer & professional fire departments – for field or reserve units • Agriculture & industry – fast pumping of large volumes of water • Flood protection, emergency drainage • Firefighting equipment enthusiasts and collectors

Condition: good (used), Year of construction: 2018, operating hours: 1,619 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 472 kg, mileage: 1,619 km, Well-functioning electric pallet truck Linde T16 from 2018; Capacity of 1,600 kg; 1,619 hours on the counter; Equipped with battery, external charger, and automatic filling system Tjdpfjw Tk R Sjx Ahuef

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi, control panel from automatic cutting machine Bierrebi TA 103 Tjdpfx Ahoiidq Nsusf -Dimensions: 435/220/H90 mm -Weight: 1.6 kg

Condition: excellent (used), For sale: professional fire-fighting portable pump Albert Ziegler FP 8/8 (DIN 14420). The unit is in outstanding technical and visual condition – only 91 operating hours! Key details: • Manufacturer: Albert Ziegler GmbH, Germany • Model: FP 8/8 – Ultra Leicht • Year of manufacture: 1992 • Hours: 91 h (documented with VDO meter) • Engine: Hirth, 2-stroke, air-cooled – proven reliability • Rated capacity: 800 l/min at 8 bar • Rated speed: 4,400 rpm • Original nameplate, fully complete Condition and advantages: • Very low hours • Fully operational • Well-maintained, dry, no modifications • Ideal for volunteer fire brigades, agricultural use (irrigation, pumping), technical services, or as a collector’s item Ready for work The equipment is ready for immediate use. Ziegler portable pumps are synonymous with top quality – durability and reliability proven in hundreds of fire brigades worldwide. Tedpjxa Evujfx Ahuof

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Todpfx Aeih S I Ushuef -Manufacturer: Bierrebi, control panel from automatic cutting machine Bierrebi TA 103 -Dimensions: 435/225/H80 mm -Weight: 1.5 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm Todexzf T Aspfx Ahusf MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thicknesses Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Tedsxxklfopfx Ahusf Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Tjdpfexxi Ulsx Ahuef Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Carbon traverse (crossbeam) Todpfx Aoxxih Eshuef Composite body Pallet changer Various nozzles Protective lenses

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 49,277 h, bending force (max.): 230 t, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 3,680 mm, working length: 4,250 mm, The control computer was completely renewed in 2025. In addition, the oil and filter were replaced in 2025! TECHNICAL DETAILS Pressing force: 230 t Bending length: 4,250 mm Distance between uprights: 3,680 mm Throat depth: 420 mm Ram stroke: 445 mm MACHINE DETAILS Control: TASC 6000 Machine weight: approx. 19,200 kg Operating hours: 49,277 h Tsdpfx Ahexwn Hdeuef EQUIPMENT 2 support arms 1 bending aid Light curtain in front of the machine Foot switch 6-axis backgauge

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 573385, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table load: 1,000 kg, Die-sinking EDM machine with MultiChange IMC4 TECHNICAL DETAILS Travel X-axis: 525 mm Travel Y-axis: 400 mm Travel Z-axis: 450 mm Y-position electrode changer: 675 mm Drive: AC servo motors, digital Rapid traverse: 2 m/min Todpfx Aoxwkttohujf Digital resolution: 0.001 mm C-axis: 1 - 20 rpm Load capacity with/without changer: 15 / 50 kg Worktable: 730 x 630 mm Load: max. 1,000 kg Dielectric tank: 400 l Filter surface area: 4 m² Lifting tank: 750 x 650 x 420 mm Dielectric height: 375 mm IMC 4 Electrode magazine: double magazine Number of electrodes: 182 Gripper: dual gripper Workpiece pallet magazine: 8 units Size per workpiece: 320 x 320 x 240 mm (alternative) MACHINE DETAILS Main dimensions: 2.2 x 2.15 x 2.54 m Weight, ready for operation: 4.8 t Connected load: 7 kVA IMC 4 Footprint: 2,800 x 4,101 mm Connected load: 11.6 kVA

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Tsdpjxxaucsfx Ahuof Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, working height: 950 mm, conveyor belt speed: 833 mm/s, conveyor belt thickness: 7 mm, cylinder diameter: 190 mm, TECHNICAL DETAILS Working dimensions: 70 - 4000 mm Leg length: 5.0 mm to 12.0 mm Profile height automatic: 4.0 mm to 24 mm Profile height manual: up to 35 mm Butyl cylinder Butyl cylinder diameter: 190 mm Butyl cylinder length: 250 mm Butyl cylinder volume: 7.5 l Operating temperature butyl: 100°C to 140°C MACHINE DETAILS Working height: 650 mm to 950 mm Conveyor belt height: 0 mm to 7 mm Conveyor speed: 5 m/min to 50 m/min Connected load: 5 kW Compressed air consumption (for 1 m × 1 m frame): 23 standard litres Air consumption when refilling butyl: 300 standard litres/min Pneumatic input pressure: 6.5 bar to 8.0 bar Pneumatic operating pressure: 6.5 bar Maximum butyl extrusion pressure: 280 bar Maximum operating pressure: 300 bar Todpfxsxur Aws Ahusf EQUIPMENT Butyl cylinder Conveyor belt Pneumatic system

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, bar passage: 77 mm, CNC Lathe with Loading and Unloading Robot and Chip Conveyor! TECHNICAL DETAILS Travel X-axis: 230 mm Travel Y-axis: 100 mm Travel Z-axis: 575 mm Maximum machining diameter: 380 mm Maximum cross slide swing diameter: 675 mm Maximum distance between spindles: 541 mm Todpsxxl S Tjfx Ahusf Maximum bar capacity: 77 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 21 m/min Rapid traverse Z-axis: 33 m/min Main Spindle Speed: 4,000 rpm Motor (100% / 30 min): 22 / 26 kW Spindle bore: 88 mm Sub Spindle Speed: 6,000 rpm Motor (25% duty cycle): 7.5 kW Travel: 585 mm Tool Turret with Live Tools Number of stations: 12 Maximum speed: 4,500 rpm Motor: 5.5 kW Tool shank height: 25 mm Tool shank diameter: 40 mm MACHINE DETAILS Operating hours: approx. 66,000 h DIMENSIONS & WEIGHT Installation area (L x W x H): 285 x 187 x 187 cm Machine weight: 5,400 kg EQUIPMENT Mitsubishi RV-12SL-S12 loading and unloading robot Interface for bar feeder Automatic parts catcher Automatic door High-pressure cooling, 5 bar Chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation Tjdpjxwnxtsfx Ahujf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Tsdpfexw U Eaex Ahusf Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt