Used Operating Resolution for sale (27,011)

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Ffodpfx Aov Igghjg Dsw Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Fedpev Igg Iefx Ag Djfw Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), Year of construction: 2004, Technical Specifications – ZS 130 T Gearwheel Shaving Machine Gear Specifications: * Gear diameter: 20 – 145 mm * Tooth width: 40 – 45 mm * Module range: 1.25 – 3.5 Working Area: * Swivel range of the shaving head: -23° to +90° * Taper adjustment (B-axis): +2° / -2° * Horizontal adjustment (X-axis travel): 160 mm * Swivel range of rotary table (E-axis): ±20° * Input resolution for all NC axes: 0.001 mm / degree Slide Travel (Z-Axis): * Travel range (Z-axis): 300 mm * Input resolution: 0.001 mm Shaving Cutter Dimensions: * Outer diameter: 230 – 256 mm * Bore diameter: 63.5 – 100 mm * Shaving cutter width: 50.8 – 0.2 mm Workpiece Parameters: * Outer diameter: 20 – 145 mm * Module: 1.25 – 3.5 * Gear width: up to 40 mm Rotational Speeds: * Tool spindle speed (infinitely adjustable): up to 600 rpm * Workpiece speed (machining): up to 3000 rpm Ffsdekwc Tfspfx Ag Dew * Workpiece speed (spin): up to 4500 rpm Feed Rates: * A-axis: up to 3.3 rpm * B-axis: up to 0.5 rpm * C0-axis: up to 60 rpm * X-axis feed: 10 – 10,000 mm/min * Z-axis feed: 10 – 10,000 mm/min Machine Weight: * Approx. 5,600 kg --- Machine Description: The ZS 130 T is a high-performance gearwheel shaving machine designed for the precise finishing of cylindrical gears after hobbing or shaping. Shaving is a crucial process in gear manufacturing, used to correct profile and lead deviations and to improve surface finish, ensuring quiet operation and extended gear life. This machine is capable of processing gears with modules from 1.25 to 3.5 and diameters up to 145 mm. With its CNC-controlled axes and flexible swivel and taper adjustment capabilities, the ZS 130 T allows for a wide range of gear geometries and high production efficiency. The machine is ideal for manufacturers requiring high precision, consistency, and productivity in gear finishing processes. Typical Applications: * Finishing of gears for automotive transmissions and gearboxes * Shaving of helical and spur gears * Volume production in automotive and industrial gear manufacturing * Correction of tooth profile and lead errors before heat treatment The ZS 130 T combines robust construction, high-speed capability, and flexible adjustment options, making it a reliable solution for demanding gear shaving applications.

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam Fsdpfx Aoxaax Rog Djfw - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, Year of construction: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat-bottom working tank with separation capabilities, designed for processing medium to large parts. It is equipped with an easily exchangeable screening unit. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously regulated using a frequency inverter (optional). Thanks to the lateral discharge, the EVP-RA 550 can be linked with other machines for integrated operation. The system can optionally be equipped with a fully automatic PLC control unit. ERBA vibratory finishing systems are known for their durability and reliability, supported by a hot-cast polyurethane lining in the working tank. Technical data: - Gross volume: 550 L - Working channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Tank inner diameter: 1,400 mm As an experienced partner, we provide comprehensive expertise in vibratory finishing technology. Together with you, we develop efficient solutions to achieve optimal process results. Prices are net plus statutory VAT and shipping costs. Images may show the system with accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are happy to provide you with non-binding advice. Ffsdpfx Ajyq Rh Sog Dow The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions, legal notice, and information about your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, The ERBA Vibratory Finishing Bell TAM 220 is perfectly suited for surface finishing of very small, thin, or delicate parts, but is also ideal for movable and solid components such as chains. It is equipped with a frequency inverter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to variable speed control, the machine delivers the required precision and is particularly suitable for extended processing times without operator intervention. Technical specifications: - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm As an experienced partner, we provide expertise in all aspects of vibratory finishing. We collaborate with you to develop efficient solutions for optimal process results. Fodpjyq Rhfjfx Ag Djfw All prices are net plus the currently applicable statutory value-added tax and shipping costs. Accessories shown in the images may be optional and subject to additional charges. If you are interested, we look forward to your enquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, during which we will also inform you of our general terms and conditions including our legal notice and the right of withdrawal, before the purchase/contract conclusion takes place.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). Fsdpeyq Rgusfx Ag Defw ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Technical specifications: - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, Machine type: ESA 15 Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Ffsdpeyq Rd Tjfx Ag Dew Description: The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising work chamber floor with integrated separation system. It is equipped with an easily replaceable screening unit and delivers high operational efficiency thanks to its integrated drop step. Discharge and separation are managed via the built-in hatch (manual/pneumatic operation). On request, a reinforced suspension and a more powerful motor can be installed for higher load requirements. The motor speed can be infinitely adjusted via frequency converter (optional). Side discharge allows the EVP-RA 350 to be linked with other machines. The unit can be optionally equipped with fully automated PLC control. Fjdpfsyq Rc Aox Ag Djfw ERBA vibratory finishing systems are characterized by their robustness and long service life, largely attributed to the hot-cast polyurethane lining of the work chamber. Technical Data: - Gross volume: 385 L - Working channel width: 340 mm - Unbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal drum diameter: 1,200 mm As an experienced partner, we offer expertise in vibratory finishing processes and cooperate with you to develop efficient solutions for optimal processing results. All prices are net plus the current statutory VAT and shipping costs. Images may show the machine with optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with expert and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing is intended solely as an online presentation of our product. Contracts are negotiated via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions, imprint, and information on your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP-RA 1700 Manufacturer: ERBA Power kW: 11 Total volume: 1,750 l The EVP-RA 1700 vibratory finishing machine from ERBA is equipped with a rising process bowl floor with integrated separation. It features an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is available as an option. The machine offers high operational efficiency thanks to its integrated drop step. The emptying and/or separation process is carried out via the integrated flap (manual/pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be adjusted steplessly via frequency inverter. The EVP-RA 1700 can be linked with other machines via its side discharge. Fodpfx Ajyq Rausg Dsfw As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including optional accessories which are available separately and may incur additional costs. The listed price refers to the base machine. The photos are for illustration purposes only; actual appearance and size may differ from the images. If you are interested, we look forward to your inquiry. We are happy to provide you with professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (OS platform). This offer serves exclusively to present our products. Contract negotiations are concluded via telecommunications (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you of our general terms and conditions, legal notice, and right of withdrawal before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Take advantage of our portfolio of plastic abrasive media for processing softer materials such as brass, copper, or aluminum. Plastic abrasive media offer a gentler and less aggressive treatment. Like ceramic abrasive media, plastic abrasive media are available in a wide range of grit strengths, shapes, and sizes. We select the optimal media for your components and processes to ensure the best results. Overview of the different geometries and their properties: - Cones (K) have a high mass, resulting in efficient material removal. Their rounded shape enables gentle processing. - Pyramids (P), with their edges, are ideal for deburring operations. Thanks to their pointed design, these media can reach difficult areas such as boreholes. - Tridents (DZ) are especially suitable for processing complex components, such as gear parts or workpieces with grooves. - Paraboloids (PA), similar to cones, use their rounded shape to excel at smoothing and polishing, delivering gentle and even surface treatment. - Lenses (L), with their lower weight, are well suited for soft materials and deliver gentle and consistent material removal. - The Wedge (K), thanks to its versatile geometry, is an optimal abrasive for deburring. Its pointed shape means it can easily access narrow slit areas. - Tetrahedrons (T) function similarly to pyramids, with their edges providing efficient deburring. Their sharper corners allow them to better access complex areas. As an experienced partner, we provide expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. If you are interested, we look forward to hearing from you. We will gladly provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Ffodpfoyq N S Nex Ag Dsw This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging platform). We will initially send you a non-binding offer, which will also include our general terms and conditions with legal notice and information about your right of withdrawal, before any purchase or contract is concluded.

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Fedpfxovuw R Rj Ag Djfw Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand Ffjdpfxoxt Dmxe Ag Djw The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction Ffedpfx Agsyrty Ts Dow - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm Ffedpfx Ageyrty Hj Djw - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Distance between centers: 2000 mm Center height: 230 mm Max. swing diameter: 455 mm Max. workpiece weight between centers: 800 kg Max. workpiece weight, overhung (including clamping device): 200 Nm X-axis infeed movement: Electromechanical drive with ball screw spindle X-axis infeed movement: Traverse speed 0.01 – 8,000 mm/min X-axis infeed movement: Setup via electronic handwheel or directional pushbuttons X-axis infeed movement: Measuring system with glass scale, internal resolution 0.0005 mm Z-axis table movement: Table speed 0.01 – 10,000 mm/min Workpiece spindle motor: 3.0 kW at 0–300 rpm Workpiece spindle mount: MK5 and KK5 Control system: SIEMENS 840 D solution line Operation via dialog method Electronic handwheel available Grinding spindle motor: 11 kW Grinding wheel peripheral speed: 35 (50) m/s Standard grinding wheel: 600 x 80 x 203.2 mm Surface grinding wheel, right: 300 x 40 x 127 mm Internal grinding spindle as per customer specifications Tailstock taper: MK4 Tailstock manually (hydraulically) operated Tailstock foot switch with 40 mm quill stroke and MK5 Card index/digital data management for workpiece data, up to 100 grinding wheels and 40 dressers Cylindricity error correction program-supported for all dressable grinding wheels Dressing from the workpiece spindle headstock or tailstock Dressing allowances are automatically compensated Optional integration of diamond form rolls or swiveling dressers Various dressing strategies available in the control system Optional integrated CAD program Optional import of existing CAD data B-axis infinitely swiveling Fast and repeatable positioning Available grinding spindle configurations: Fjdpfx Asynubwjg Defw - External grinding wheel left - External grinding wheel left, surface grinding wheel right - External grinding wheel left, external grinding wheel right - External grinding wheel left, internal grinding spindle - External grinding wheel left, surface grinding wheel right, internal grinding spindle Production machine Can be equipped with loading portal and in-process measuring controls Modular system / options: - B-axis swiveling manual or infinitely automatic - Number and configuration of grinding spindles (external and internal) - Positionar (Z-length measuring probe) - Touch detection - In-process measuring control - Controlled C-axis (non-circular grinding) - Hydrostatic guide on the X-axis (infeed axis) - Swiveling dresser, diamond form roll - Servo-controlled tailstock with programmable pressing force - Network connection - Data backup - Remote maintenance - Universal paper band filter - Compact air filtration device Grinding cycles: - X plunge grinding - Z plunge grinding - Z longitudinal grinding - Angular plunge cutting - Multi-X plunge cutting - Contour grinding - Oblique oscillation - Positionar cycle - Non-circular machining - Face grinding - Z peel grinding - Auxiliary function The machine was commissioned at the end of 2012.

Condition: ready for operation (used), Year of construction: 2011, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control ModEva 12S oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8800 kg range L-W-H 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request - in checked conditions - machinevideo - ?v=ALo1SpWfnTk ----- SPEED BEND electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake Fsdpfjyk Dhrox Ag Dsfw - CYBELEC "ModEva 12S" CNC control unit * High-resolution screen * Clear, concise menus in the language of the operator * Tools and products library - CNC controlled axis : Y1 - Y2 - X - R CNC crowning - CNC electro-motorized backgauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 4x manually adjustable stop fingers - 3x 835 mm .. RehfuÃ? upper tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - 3x 835 mm ... split universal die block "M 460 R" * including 1x "C 1050-R" die shoe - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions

Condition: used, mileage: 62,662 km, power: 125 kW (169.95 HP), first registration: 03/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,272 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1004. P678835 ----EQUIPMENT * Storage tray for smartphones incl. wireless charging * Overhead storage above roof lining * Step on rear door * Electrically folding exterior mirrors * Exterior mirrors without indicator * Seats: Dual passenger seat * Side indicator lights at the front * Active brake assist * Ceiling light in cargo/passenger compartment – with door contact * Theft and break-in alarm system * Digital operating manual * Entry handle at rear left pillar * Electrical wiring for trailer socket in conjunction with 14 V/250 A generator * Suspension stabilization, level I * Misfuelling prevention system * Seatbelt warning device for passenger seat * Grab handle for driver and passenger entry * Main fuel tank 93 liters * Wooden floor (cargo area) * Interior paneling in cargo area up to roof height – wood * Hinged lid for storage compartment * Regulated Tempmatic air conditioning * Comfort roof control panel * Cargo area lighting with motion detector * Load securing: Lashing rails at side walls on roof frame * Load anchoring rail system * Cable duct at rear portal & side wall * Navigation accessory: Live traffic information * MBUX multimedia system with 7-inch high-resolution touchscreen (960 x 540 pixels) AM/FM radio with dual tuner – Bluetooth connectivity with audio streaming and hands-free function – Android Auto & Apple CarPlay – Multimedia connection unit USB-C interface – 4 x 25 W output power, sound setting, separate volume adjustment for audio and phone, 2-way front speakers * Side marker lights * Steering wheel: multifunction steering wheel * Navigation voice control LINGUATRONIC, WLAN hotspot, multimedia connection unit for connecting portable devices via an additional USB-C interface, centerfill speaker for improved sound and voice output, enhanced hands-free function, dual phone operation, digital operating manual * Navigation: 3 years of free map data updates * Fog lights with cornering light * Package: Acoustic * Package: Charging package – instrument panel with two 5V USB-C ports & 12V socket in the center storage compartment of the instrument panel – an additional USB port in the lower part of the center console * Parking package with 360° camera, park assist, rear cross traffic alert, drive away assist * Radio: Digital radio DAB * Loadable wheel arch * Double rear door, opening up to side wall Fodpjyrzk Tofx Ag Dsfw * Seats: Comfort suspension seat, driver's seat * Vibration damper * Seats: Low driver seat box * Seat heating for driver * Seat heating for dual passenger seat * Passenger compartment socket * Cruise control * USB 5V socket * Load securing: Lashing rails at side walls on belt rail * Front axle with increased load capacity * Pre-installation electrical system, programmable special module * Vehicle lowering elimination * Long-range nozzles in instrument panel * ADAPTIVE ESP (latest generation) with load- and speed-dependent dynamic handling control – anti-lock braking system (ABS) – traction control (ASR) – electronic brakeforce distribution (EBV) – hydraulic brake assist (BAS) – Load Adaptive Control (LAC) – Roll Over Mitigation (ROM) – Roll Movement Intervention (RMI) – Enhanced Understeering Control (EUC) – Brake Disc Wiping (BDW) – Electronic Brake Prefill (EBP) – Easy Lane Change (ELC) * Storage above windshield * Storage compartment under cockpit * Tow hook rear * Axle ratio i = 3.923 * Driver airbag * Exterior mirrors electrically adjustable and ...

Condition: new, Workshop press with 60 tons maximum pressing force. With electric motor and additional manual control. Therefore also ideally suited for fine work. Versions (net prices): Ausführungen 30t 60t 100t 150t 200t > 200t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 60 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 60 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) A demonstration machine can be tested under power on site. Ffedpfxof Sqcrs Ag Djw ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Lp3ew8c Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Year of construction: 2026, condition: new, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (sometimes 1.3 MP depending on configuration) Field of View 65 × 65 mm to ~130 × 130 mm Image resolution ~5.8 Lp/mm Ffodpfx Asymfmzeg Djw Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample size ~280 × 320 mm Net weight approx. 750 kg Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic inspection over multiple points. ✔ Infrared automatic navigation and positioning. ✔ Inspection report generation. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Condition: excellent (used), Year of construction: 2007, operating hours: 24,993 h, functionality: fully functional, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic cleaning system – 2015 Mollart Drillsprint – Gun drilling / Deep hole drilling machine – 1996 Traub TNL 26 – CNC Swiss-type automatic lathe – 2004 Traub TNL 26 – CNC Swiss-type automatic lathe – 2007 Traub TNL 26 – CNC Swiss-type automatic lathe – 2009 Traub TNL 18 – CNC Swiss-type automatic lathe – 2013 Traub TNL 18 – CNC Swiss-type automatic lathe – 2014 Star SV-20R – CNC Swiss-type automatic lathe – 2019 Traub TNL18-9P – CNC Swiss-type automatic lathe – 2015 Traub TNL18 – CNC Swiss-type automatic lathe – 2014 Traub TNL18-9 – CNC Swiss-type automatic lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Rösler RWT 1000-I Rotary Table Blasting Machine – Blasting cabinet – 2012 Bending Machine C 202 M – Bending machine – 1990 Schmidt Hydro-pneumatic Press – Hydro-pneumatic press – 2021 TRAUB TNL 26 – CNC Swiss/short part automatic lathe General Model: TNL 26 Year of manufacture: 2007 Control: TRAUB TX8i Condition: used, operational Operating hours (under power): 33,905 h Kinematics & Configuration Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front attachment: yes Counter-operation: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tooling systems Upper turret Stations: 12 Live tooling positions: 12 Travel: X: 50 mm Fjdpfx Ajycl Uweg Defw Z: 100 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Live tooling positions: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front attachment Stations: 5 Live tooling positions: 4 Travel X/Z: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Live tooling positions: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & Peripheral Equipment Coolant tank: included High-pressure coolant system: 70 bar Chip conveyor: included Workpiece conveyor: included Part removal and ejector: included Driven guide bushing: yes Bar feeder: included Electrical Data Supply voltage: 400 V Total connected load: 33 kW Dimensions & Weight Footprint: 3,706 × 1,292 mm Machine height: 1,630 mm Machine weight: approx. 4,000 kg

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V Fedjym Nfbjpfx Ag Dofw control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Ffsdpfx Asym Nb Asg Dow Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction Ffsdoym Nbcepfx Ag Dsw The machine can be inspected under power by arrangement.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Ffedpfx Aswc Sxdjg Djw Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.