Used Closure Mould for sale (2,372)

Year of construction: 1990, condition: used, Complete NID Moulding Line To include Iisdpoy Uk Alsfx Aa Isc NID M301-S-357 Starch Mogul Candy Moulding Line NID Vortex-S Starch Dryer Starch Trays 6 colour capability Approximately 20,000 trays

Condition: used, Manufacturer: Verbufa Model: VVM2 Condition: Used Serial number: 2043114-1 Isdpszb Eltofx Aa Ieic Stock number: 2765J Power distributor: 2 lanes Belt width: 270 mm Power supply: 3 x 400V, 50Hz, 16A Dimensions: 1750 x 1350 x 1900 mm

Condition: used, Year of construction: 2007, machine/vehicle number: 2288, Manufacturer: CFS Model: ESF400 Year: 2007 Condition: Used Serial Number: 2288 Iiodpfxoyw Sadj Aa Ioc Stock Number: 3295 Belt width: 400 mm Capacity: max 30 strokes/min Hopper: 250 litres Water: max 4 Bar Compressed air: 6 Bar, 300 l/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2250 x 900 x 2350 mm Weight: 780 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 74,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, displacement volume: 1,237 cm³, injection pressure: 1,635 bar, Clamping unit: Clamping force 3000 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 75 mm Ls/D ratio 18,7 Injection pressure 1635 bar Stroke volume 1237 ccm Shot weight (PS) 1126 gr. Injection rate 442 ccm/s Screw speed 220 1/min Plasticising rate max. 87 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Iodpfx Aajzfarhj Isic Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1490 bar Iisdpfx Aajzd Smbo Ioc Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Iiodpfszd Er Rex Aa Ijc Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Iisdoymn Nfopfx Aa Ioc Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, Clamping force 500 kN Mould opening force, max. 39 kN Travel force movable platen opening 22 kN Travel force movable platen closing 17 kN Size of mould platens (h x v) 600 x 600 mm Distance between tie bars (h x v) 370 x 370 mm Mould opening stroke 400 mm Mould height min 200 mm Max. daylight 600 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Iedezdrcispfx Aa Ieic Shot weight (PS) 54 gr. Injection rate 59 ccm/s Screw speed 365 1/min Plasticising rate max. 8,5 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 11 kW Installed heating capacity 8 kW Adjustable barrel heating zones 5 Reservoir capacity 180 ltr. Dimensions and weights: Dimensions of the machine ca. 3,50 x 1,40 x 2,00 m Total machine weight 3000 kg Accessories: - Anti vibration pads - 6-zones water distributer - Krauss Maffei Robot SPX10 Additional Options: - 1 x hydr. core pull on movable plate - 1 x airvalve - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x closing lid, II choice Manufacturer: SSI Schäfer lid type: VD-14/6-A suitable for stacking box SSI Schaefer 14/6-A Material color: green Material: steel, lacquered Dimensions: approx. 520x320x35 mm (LxWxH) own weight: approx. 2,481 kg 4 pull locks General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: Iedpfx Aohr I I Noa Ijic (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Year of construction: 2008, operating hours: 73,000 h, clamping force: 70 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iiedpfey Ntmcjx Aa Isc

Condition: used, Year of construction: 2008, operating hours: 73,000 h, clamping force: 70 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 3,500 kg, screw conveyor diameter: 253,035 mm, terms of delivery: FCA Pegnitz delivery time: on request Iiodpfx Asy Ntmiea Ijc terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Iedpfjymqz Rjx Aa Ioic delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Iijdpfx Ajzd Ehxea Isc

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Iedpeyt R S Ajfx Aa Ioic terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Iedsw E E Evopfx Aa Ioic Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: ready for operation (used), Year of construction: 2016, working width: 200 mm, total width: 1,635 mm, total height: 1,730 mm, overall weight: 3,750 kg, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: Smart Line, spindle motor power: 5,500 W, product length (max.): 3,850 mm, This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details. • Working width: 20–200 mm • Working thickness: 8–120 mm • Feed speed: 6–24 m/min • Working table length: 1700 mm • Pressure beam vertical adjustment: 10 mm • Infeed table adjustment: 10 mm • Spindle configuration: • Number of spindles: 6 • Spindle diameter: 40 mm • Maximum tool diameter: • First bottom spindle: 108–145 mm • Right/left spindles: 108 mm • Top spindle: 140 mm • Bottom finishing spindle: 96 mm • Motor power: • Feed motor: 5.5 kW (7.5 HP) Iiodpfx Ajy Ukg Rsa Ijc • Right spindle motor: 5.5 kW (7.5 HP) • Left spindle motor: 5.5 kW (7.5 HP) • Top spindle motor: 7.5 kW (10 HP) • Bottom spindle motor: 5.5 kW (7.5 HP) • Feed beam lifting motor: 1.1 kW • Total installed power: 28.6 kW Additional equipment • Safety cabin included

Condition: good (used), Tools / Moulds Multivac T300 Traysealer We have the following tools / moulds in stock for a Multivac T300 Traysealer: Traysize 227 x 178 mm (2 tools in stock) Traysize 278 x 187 mm Traysize 208 x 160 mm (for SKIN-packaging) Iisdpfxou Tczmo Aa Ioc Traysize 164 x 123 mm (1/8 gastro)

Condition: good (used), Year of construction: 1980, Spinning machine Iiedpjx Ttpljfx Aa Isc LEIFELD Spinning moulds

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines Iisdpfx Aoxf T I Nea Isc * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Year of construction: 1999, condition: ready for operation (used), A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible. Iiedpjzc Rd Defx Aa Ijc

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Ijdpfxozcyqtj Aa Ijic

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar Iiedoppigdopfx Aa Ijc CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Year of construction: 2000, condition: ready for operation (used), Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible. Iijdpfxjy Igcne Aa Ijc

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Iiodpfx Astpf N Uea Ioc - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: used, Year of construction: 1997, type of input current: three-phase, DELLE VEDOVE PROFILE GRINDING AND BRUSHING MACHINE A machine designed for grinding, smoothing, polishing, brushing, and satin-finishing boards, strips, and wooden or wood-like components. Iijdpoytcv Hefx Aa Ioc Year of manufacture: 1997