Planers/Moulding Machines

SCM SUPERSET CLASS

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Giedpfxex E T Dmj Ahnsw

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Godpfx Ahsyk I U Aensiw Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: excellent (used), SCM T150 Spindle Moulder Spindle diameter: 35 mm Total spindle length: 180 mm Godpfxjw Ral Hs Ahnoiw Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation

Condition: excellent (used), Weinig four-sided planer Gjdpjrigxyjfx Ahnsiw max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Giedpfsvvi Nbsx Ahnow

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Gijdpfx Ahshlp D Nsnew - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET Gjdpfsdvlcysx Ahnjiw SECOND-HAND, FULLY RECONDITIONED

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C Godpov Si Szofx Ahnsiw 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm Gsdpjx D D Hmofx Ahneiw • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Gsdpfx Ahou Agh Seneiw Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location