Used Injection Plastik for sale (1,842)

Condition: used, Year of construction: 1998, Injection moulding machine Krauss Maffei KM 300 1400 C1, year 1998 Control: Mc 3 Clamping force: 3000 kN Shot weight: 900 g Giedjw D Hglepfx Afnjn Core pull: 2 Screw diameter: 60 and 70 mm Operating hours: approx. 18,000 h

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Godpfx Aow D Rmiefnsin Operating hours: approx. 63,000 h The machine can be inspected at any time

Condition: used, Year of construction: 2010, Injection molding machine Arburg Allrounder 470 H 1000-170, year 2010 Gisdpfsw E Ev Usx Afnjn Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Shot weight: 77 g With Arburg robot The machine can be inspected under power at any time!

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Gisdpjyg Hbgsfx Afnsn

Condition: used, Year of construction: 2007, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: 6260 x 1555 x 2219 mm (L x W x H), net weight 11,000 kg Giodpfxow E N S Ts Afnon - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (L x W x H), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm

Condition: used, Year of construction: 2004, 3 x Netstal injection moulding machines Netstal SynErgy 1750-460 injection moulding machine, year 2004 Netstal Synergy 2400 injection moulding machine, year 2004 Gsdpfx Aox Tracofnein Netstal Synergy 1500K injection moulding machine, year 2005 More technical data and images available upon request.

Condition: used, Year of construction: 2018, 6 x Stork injection moulding machines Machine type Commissioning Age in months Gsdpfx Afjx Uymaenjin 4400-2150 19/12/2002 278 4400-2150 28/11/2012 159 4400-2150 14/08/2015 126 6600-5650 01/11/2011 171 9000-5650 30/05/2014 141 9000-5650 01/11/2018 87

Condition: ready for operation (used), Injection Moulding Machine WINDSOR (Germany) Model: W2700 Year of manufacture: 1986, overhauled in 2018 Clamping force: 27,000 kN (2,700 t) The capacity can be increased up to 3,200 t! Opening stroke: 2,180 mm Installation height: 500 mm Platen size vertical: 2,750 mm Platen size horizontal: 1,900 mm Tie bar spacing vertical: 1,400 mm Tie bar spacing horizontal: 2,240 mm Centralization DS / AS: 250 mm Giodpeyf Imuefx Afnen Max. injection volume: 15,300 / 48,000 ccm Screw diameter: 175 mm The machine can be inspected under power. ___ Our general terms and conditions (GTC) apply. The seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Gedpoxluk Sofx Afnsin

Condition: excellent (used), Year of construction: 2005, Welcome We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW Gjdpfxovyuvue Afnsin

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Gedpfx Aoppigdofnsin Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Giodpowd Udlefx Afnjn

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Drive force of moving platen: open: 105 kN close: 95 kN Mounting platen size (H x V): 1,060 x 1,095 mm Clearance between tie bars (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force fwd/return: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating zones: 6 Dry cycle speed: 1,550 1/h Oil capacity: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Shot capacity: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed, standard / optional: rpm 285 / 349 Screw drive power standard or stage 1: 95 PS Screw drive power optional or stage 2: 117 PS Gsdpfx Asxu Uvajfnjin Nozzle contact force: 82 kN Fully hydraulic twin-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5" floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle diameter: 6.00 mm

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameter: 25/22 mm Machine weight: 10,600 kg Giedpfot A Ui Aex Afnsn Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table The machine has run nearly 33,107 hours in automatic mode. Current note – Tax advice and advantage for used machines From 01/07/2025, used machines can also be depreciated for tax purposes with a special annual depreciation rate of 30%. In addition to the more favorable price compared to a new machine, you can claim the same depreciation benefits as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Due to recent developments - Tax notice and advantage for used machines From 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year. In addition to the more favorable price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 German Income Tax Act - draft) Gjdpfx Afjt A Ufwsnoin Engel E Max cleanroom machine, year 2008, including GEKU SR 500 ST linear robot The machine has operated just under 58,000 pump hours in automatic mode. The machine comes from a well-known pharmaceutical manufacturer, which means both the machine and the handling system were subject to very strict maintenance management and are in excellent condition. We provide a commissioning warranty for every machine purchased from us.

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Hersteller: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Gijdpsxvy Rljfx Afnsn Injection pressure: 2500 bar Measurements and weight Machine weight: 4850 kg Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67).

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Gisdjycqc Tspfx Afnon Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: used, Year of construction: 2009, machine/vehicle number: PR21, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights. Manufacturer: Husky Model: HyPET120 P85/95 E85 Year of manufacture: 2009 Clamping force: 120 tons Gijdpoyhbd Ssfx Afnon Cavities: 32 Hot runner system: Husky 32-cavity hot runner, common across supplied molds Neck finishes: 29/25 mm primary; additional parts for 30/25 mm Preform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 g Additional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g) Cycle times (typical): 7 s, 8 s, 9 s Electrical supply: 400 V, 50 Hz, 3PH+N+PE Main supply current: 191 A (auxiliary supply: 40 A) Short-circuit rating (panel): 10 kA Included peripherals: Plastic Systems resin dryer with material hopper, mold dehumidifier, and available spares Bottle formats supported via preforms: 0.2L, 0.5L, 1.0L Container material: PET Advanced Automation & Control Systems The machine features Husky engineering for precise temperature control, shot stability, and efficient thermal management across the 32-cavity hot runner. The molding system supports fast setup with plug-and-play cold half plates, simplifying changeovers between formats and weights. Operator interaction is streamlined through an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control panel is designed for industrial duty with a 10 kA short-circuit rating and clear segregation of main and auxiliary supplies. Integrated HMI for process control and monitoring Hot runner temperature control across all 32 cavities Quick-change cold half plates, tooling plate, and cooling pick set Electrical: 400 V, 50 Hz, three-phase with neutral and protective earth Production Line Integration Capabilities Optimized for PET preform manufacturing, this system integrates cleanly with upstream resin handling and downstream conveyance to stretch blow molding, quality inspection, and packing stations in beverage production. The included Plastic Systems resin dryer and mold dehumidifier stabilize material and mold conditions, enhancing repeatability and line throughput in broader bottling equipment ecosystems. Inline or standalone operation for preform supply Compatible with industrial packaging and beverage production lines Rapid format changes across 0.2L, 0.5L, and 1.0L bottle formats Designed for PET preforms used in water, juice, and other beverage applications Ma...

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow. Manufacturer: Husky Injection Molding Systems Model: H160 RS45/42 Year: 2009 Application: Cap/closure molding for beverage packaging Mold cavitation: 24 cavities Closure specification: 29/25 mm, Free Start Cap Nominal part weight: 1.20 g (cap) Clamp force: 160 tons Electrical supply: 400 V, 50 Hz, 3PH+N+PE Main supply current: 101 A Largest motor load: 42 A Largest heat load: 31 A Short-circuit current rating (SCCR): 10 kA Included equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare parts Advanced Automation & Control Systems The machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation. Precision heater control with Altanium technology Clearly rated electrical distribution for motors and heaters Stable process conditions for consistent cap quality Designed for quick setup and repeatable mold changeovers Production Line Integration Capabilities This unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments. Giedpfx Ajyhbdxofnsn Standalone or inline operation with downstream handling Compatible with PET bottle packaging for beverage production Auxiliaries included to stabilize material handling and color dosing Machine Condition & Maintenance History The machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand industrial machinery maintained for continuous service. Operational status: in production Auxiliaries and spares included for upkeep Operational ...

Year of construction: 2003, condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Gsdpfx Afsmrri Djnjin

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Gisdpfjp S Srhex Afnsn

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gjdpfjh Nypfjx Afnein

Year of construction: 2017, condition: ready for operation (used), Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation. Giedpfx Aok N Dndsfnjn

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Gjdsiiv Aqspfx Afnoin

Year of construction: 1986, condition: ready for operation (used), Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed. Godpfx Ajpvkzyefnein