Used Injection Plastik for sale (1,800)

Condition: used, Year of construction: 2017, functionality: fully functional, Operational Haitian MA3800 - MA2500 - MA2000 - MA1600 injection moulding machines Lodey Iydxepfx Amnjrl

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Lredpfjxu E E Sox Amnsl Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, Due to lack of use, a Plasmek Plastic Makinalari LM500 W6-P laminating machine is for sale. The machine has virtually 0 operating hours and has not been used. All parts and accessories are included. Special offer: now only €39,500. Lodpfx Amew H Rpvjnsrl

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Lodpfx Ajy Ry E Ujmnorl Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Industrial air systems Compressor refurbishment specialists Spares or parts use Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Condition: used, Year of construction: 1984, operating hours: 1,234 h, functionality: unexamined, machine/vehicle number: HE 1280, injection pressure: 160 bar, input voltage: 24 V, EPS MOULDING MACHINE - E.A HEITZ HE 1280 (WITH TOOLING). Industrial EPS (expanded polystyrene) steam chest moulding machine for production of foam packing components. Manufacturer: E.A Heitz (Germany) Model: HE 1280 - Towler Hydraulik Year: 1984 Type: Hydrulic EPS shape moulding press Control Voltage: 24V Max Pressure: 80/160 BAr Includes: Installed mould plates (multi cavity tooling) Material conveying unit (Con-Evator system) Lodpfx Asy N S D Temnsrl Hydrulic and steam system

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, clamping force: 70 kN, screw diameter: 32 mm, injection weight: 109 g, type of input current: AC, The Negri Bossi 70T in very good condition comes with hopper loader distance between tie bars 360x315 Lredoy Rvfkopfx Amnel

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition the screw size 32mm distance between tie bars 315x280mm year of manufacture 2002 Lrsdpfx Asy Rvcvemnol

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy Lrjdpjtpf N Uofx Amnel - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Lodpfx Ajy Ub D Tsmnerl Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Lodpfx Amoy Ub D Hjnerl Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18620 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Lsdpfx Amsy Ub Dyenorl Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt. Lodpfxjy Ub Dto Amnjrl

Condition: good (used), Year of construction: 2012, Ref. no.: 18610 Manufacturer: DEMAG Type: IntElect 160/520-340 NC5 Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: Lodpfxoy Ub Dms Amnjrl * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Lrodexu Uvaspfx Amnsl Mold opening stroke: 920 mm Minimum mold height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection flow rate: 527 cm3/s Screw speed Standard / Option: 1/min. 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle clamping force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inches) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 19526ä

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. Lodoy Au I Uepfx Amnerl The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Ljdpfx Aexhfuajmnjrl Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Lrodpfx Amewm Iy Ejnsl Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Ledpeyiz U Tefx Amnsrl Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ledpfxjy T Sm Ns Amnjrl

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Lrodpsy Snapofx Amnol Ausstattung: .Kernzug -Roboter

Condition: good (used), Year of construction: 2010, Straight conveyor belt for automation (for example, 'ghost shift' intermediate buffer) Consists of two belts: one belt holds empty cartons, and the second belt holds filled cartons. Lrjdpfey Spixex Amnjl Both conveyors are equipped with EUROMAP67. With this, the conveyors can be programmed together with the machine and the removal robot. Manufacturer: KRAUSS MAFFEI Year of manufacture: 2010 Length of conveyors: 6.00 m each Total width of conveyors: 1.75 m

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lrjdpsy Tbzvefx Amnol

Condition: used, Year of construction: 2000, (1) Injection molding machine, handling: Arburg | Multilift H with B-axis | 2000 Temperature control: HB Therm | HB-160 Z1 | 2012 Miscellaneous: 1x Handling System 1x Conveyor Belt (integrated into the injection molding machine) 1x Conveyor Unit, Motan 1x Packaging cell with: Robot, Yaskawa GP-7 Camera system, Omron Conveyor belt, Robotunits Lrjdpfx Aoy N Saujmnsl Technical Details: Operating voltage: 400 V Frequency (Hz): 50 Control voltage 1: 230 V Control voltage 2: 24 V Motor/Heating rated current (A): 200.0 / 93.0 Total connected load (kW): 42.0

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Lrodpfx Amoy N R U Rjnjl Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Lredpfx Amoy N R Uqsnsl Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190