Used Doosan Dl 200 for sale (261)

Condition: used, Year of construction: 2013, operating hours: 4,657 h, Equipment: all wheel drive, * Enclosed cab * Load sensing shut-off * Rear-view camera Todjzxaxbepfx Ac Teb * Air conditioning * CD radio ----Vehicle number 12423 ----Errors and prior sale excepted

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Manufacturer: Doosan Model: DL200 Year of manufacture: 2018 Todpfx Asy S S Epoc Teb If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler Tjdpfx Ajyyy H Rsc Tsb - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system * Work lights * Loading bucket Tedpfx Acoy Daf Ij Teb * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Todpoy St Sdofx Ac Tjb Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Tedpjzd Sk Hsfx Ac Tsb Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total length: 2,250 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg Tedpfovhpr Hsx Ac Tob * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Tjdpexxkf Ssfx Ac Tob Engine type: Doosan Doosan DL06 Stage IV

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 7,460 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Todpfx Aozb I U Doc Tob Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2017, operating hours: 7,480 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 348 cm Digging depth: 4.4 m = Additional options and accessories = Tedpfxoy Nwuke Ac Tjb - Central lubrication - Rubber tracks

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Tsdpfxoxq R Evo Ac Teb Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3 Todpoy Takiefx Ac Teb

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available Tjdpfx Ajydigmec Tjb good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: used, Year of construction: 2017, operating hours: 8,000 h, Location: Cabanillas del Campo (Guadalajara) The used Doosan DL300-5 wheel loader is designed to allow the operator to work for hours under excellent conditions. More space, better visibility, air conditioning, a very comfortable seat, sufficient storage space, and more features. Load capacity: 3 m3 (3,000 liters). Used wheel loader for sale, equipped with a bucket at the front, ideal for building construction, mining, roads, highways, tunnels, or hydroelectric dams. Tsdpfszb Nahex Ac Tob This wheel loader model outperforms the competition with technologies that reduce fuel consumption and set new standards for comfort in the cab. CE certified.

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Tsdeqqivvopfx Ac Tsb Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Tsdpfx Acsxxdmie Teb Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: excellent (used), DOOSAN PUMA 3100 XLY CNC LATHE ONLY 2163 RUN TIME HOURS !!!!! UPGRADED FANUC I CONTROL 305 MM HYD CHUCK Tjdpozumadofx Ac Tsb 420 MM TURNING DIA 2125 MM TURNING LENGTH MAX SWING 850 MM MAX SWING OVER CROSS SLIDE 670 MM X TRAVEL 293 / Y TRAVEL 130 MM / Z TRAVEL 2190 MM FULL C AXIS AND Y AXIS HYD STEADY - SMW SLU-X-4-MS ( CAPACITY 30 - 245 ) MAX SPINDLE SPEED 2800 TOOL PROBING DRIVEN TOOLS - 2+2 + STATIC HOLDERS SPINDLE POWER 35 HP YEAR 2012 THIS MACHINE HAS BEEN ONE OWNER ONE OPERATOR SINCE NEW - NEVER REQUIRED A REALIGNMENT - IMPECCIBLE CONDITION THROUGHOUT LOCATION NORTHERN IRELAND LOADING - FREE TRANSPORT CAN BE PRICED - PLEASE GIVE FULL ADDRESS

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: LNR-1043, turning length: 1,130 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,150 mm, type of input current: three-phase, MACHINE INFORMATION Manufacturer: Doosan Model: S550L Year: 2006 Condition: (Used) Good Serial Number: LNR-1043 Tedpfx Aozwnbnsc Tjb Control: Fanuc Control Accessories: Tool Eye, Swarf Conveyor, 3 & 4 Jaw Chuck MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 102mm Chuck Size: 20″ 4 Jaw Chuck & 3 Jaw Chuck Distance Between Centres: 1130mm Max Cutting Diameter: 550mm Max Cutting Length: 1130mm Spindle Speed: 2500rpm Turret Positions: 12 Station Swing: 710mm X Axis Travel: 315mm Z Axis Travel: 1,150mm Price: £22,000 + VAT

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Tsdpfx Acjzwhtke Tsb Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Tedpfszt Spnex Ac Tob Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Tedpjiy Nppsfx Ac Teb Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: good (used), Year of construction: 2012, operating hours: 7,360 h, Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Todpjzt R U Njfx Ac Tsb With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. With Coolant System, Tool Setter, Parts Catcher, Seoam CAH-08 3 Jaw Power Chuck, Tailstock, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,325 x W1,600 x H1,600mm. Weight 2,900kg.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,728 h, Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Todpfx Acezt R Uce Tob With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. With Coolant System, Tool Setter, Parts Catcher, Ø165mm Collet Unit, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,940 x W1,632 x H1,700mm. Weight 3,500kg.

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Tjdozqtb Hepfx Ac Tsb Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm Tedpfx Acsxm Sxvj Tob W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.