Injection molding machine

Arburg 820S 4000-2100 Nr 195746

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Bwsdpfx Anog Dgbhoren Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE Bodswcggvspfx Anrswn

Condition: used, machine/vehicle number: 916183, Year of construction: 2012, operating hours: 2,526 h, lifting height: 5,500 mm, fuel type: diesel, power: 55 kW (74.78 HP), motor manufacturer: Perkins, gearing type: hydrostat, Lifting capacity: 3.000 kg Maximum passing height: 298 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Bedetvlqxspfx Anrjwn Tyre brand: - Transport dimensions (LxWxH): 6.65x2.1x2.97 Please contact PFEIFER GROUP for more information

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Bwsdpfxjv S E Dgj Anron Technische Ausstattung anfordern.

Condition: used, machine/vehicle number: MAN00000E01086979, Year of construction: 2022, operating hours: 670 h, lifting height: 3,700 mm, fuel type: diesel, power: 37 kW (50.31 HP), motor manufacturer: Kubota, gearing type: hydrostat, Lifting capacity: 2.500 kg Maximum passing height: 209 cm Front tyres / undercarriage remaining: 0 Bsdpfx Aotvlqmenrown Rear tyres remaining : 0 Tyre brand: - Transport dimensions (LxWxH): 4.19x1.45x2.08 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps. Bwedpfxsrq D Nie Anrsn

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Bedpop Audqsfx Anrown Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: used, table length 400 mm Bedpfxevwgq Se Anrjwn table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Yunnei EUR5, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift CE EUR5 Diesel engine EUR5 Yunnei DEF30CZEF5 74 kW 100 km Bwsdpfsuzivvsx Anrjn 5T lifting capacity forklift weight 7200kg triplex mast 5m lifting height pneumatic tires air-conditioned cabin 1220mm fork length additional bucket included additional 2000mm forks the fork is NEW CE certyficate PayPal payment available

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Bystronic ByStar 3015 4.4kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING Bodor Hcmropfx Anrjwn LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Technical Information BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Cut hours: 9,000 ADDITIONAL EQUIPMENT – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)