Used Injection Plastik for sale (1,759)

Condition: excellent (used), Year of construction: 2004, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm Bjdpfxjh Dr E Ts Adxjww core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz delivery time: on request Bjdpfx Adexluk Ssxoww terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm Bjdpfxjxcw T Ro Adxoww - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Bwjdpfx Ajxuqh Sodxsw Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 54109, if you have any questions about the machine, please contact us Bwjdpoxlhttjfx Adxew

Condition: good (used), Year of construction: 2006, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 59 cm³, injection pressure: 2,500 bar, injection weight: 54 g, mold height (min.): 200 mm, Arburg Allrounder 320 C 500-170 Golden Edition 🏭 General Information Year of manufacture: 2006 Control system: Selogica Machine weight: 2,330 kg Electrical connection (protection): 165 l ⚙️ Injection Unit Injection unit: 170 Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Specific injection pressure: 2,500 bar Screw L/D ratio: 24 🔩 Clamping Unit Clamping unit: 500 Clamping force: 50 t Platen dimensions: 446 × 446 mm Tie bar spacing: 320 × 320 mm Min. mould height: 200 mm Bwodpfxsxuic Us Adxjw Opening stroke: 350 mm Max. distance between platens: 550 mm Ejector force: 30 kN Ejector stroke: 125 mm 🧰 Tooling and Additional Equipment Euromap 67 interface Hydraulic core on moving platen

Condition: excellent (used), Year of construction: 2005, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer Bwedpfsh Dp R Eex Adxsw clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) Bwjdpfx Adsxluk Esxow delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Bwsdpfoxn S Tpjx Adxsw

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010019101, clamping force: 1,750 kN, screw diameter: 32 mm, injection pressure: 1,611 bar, ejector force: 50,000 N, opening stroke: 450 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 1,750 kN Opening stroke: 450 mm Mould mounting area: 500 x 800 mm Minimum mould height: 500 mm Ejector force: 50 kN Ejector stroke: 150 mm Dry cycle time: 1.4 s / 357 mm Injection Unit Screw diameter: 32 mm Shot volume: 80.4 cm³ Shot weight (for PS): 77.2 g Injection force: 129 kN Injection pressure: 1,611 bar Injection rate: 201.1 cm³/s Plasticising capacity: 17 g/s Bwodpfxoxuqgbe Adxjw L/D ratio: 20 Screw speed: 590 rpm Screw torque: 250 Nm Nozzle retraction force: 25/50 kN Nozzle stroke: 510 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 5,462 x 1,931 x 2,042 mm Net weight: 10,650 kg Heating Specifications Number of heating zones: 6 Heating capacity: 8.4 kW EQUIPMENT Control panel with keypad 32 mm screw Rotameter with electronic flow control 2 cores (moving platen) 1 core (fixed platen) 2-stage sequential air injection Heated channels: 32 pcs Euromap 67 interface 6 vacuum sensors

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Bedsxl Tz Aopfx Adxsww

Condition: excellent (used), Year of construction: 2011, clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Information Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Bedpfx Ajxug Hkodxsww Control system: MC5 Machine weight: 6,200 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Distance between tie bars: 470 × 470 mm Min. mould height: 300 mm Opening stroke: 600 mm Max. distance between platens: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm 🧰 Additional Equipment Hydraulic core Pneumatic valve 4-section rotameters (2 pcs.)

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, machine/vehicle number: 221240, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language Bedpfxewg Tt Ro Adxsww - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Bodexlukxopfx Adxoww terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1600 kN Bwsdpexpknbofx Adxjw Additional Equipment Robot Demag DR711 available at extra charge. This DEMAG Systec 130/475-430 was manufactured in 2011. It features a clamping force of 1600 kN and tie bar spacing of 475x475 mm. The screw diameter is 40 mm, and it includes both pneumatic and hydraulic valves. An additional robot, Demag DR711, is available at an extra charge. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Systec 130/475-430 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Bwjdpfxsxuqc Ns Adxjw Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Bwsdpfxexl Tzce Adxjw Immediately available!

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Bjdpfoxirqqox Adxsww Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8200 Injection Unit Screw diameter 50 mm Bwedpfjxpknhex Adxew Clamping Unit Clamping force 2000 This DEMAG Extra 200-840 hydraulic injection moulding machine was manufactured in 2008. Ideal for precision plastic processing, it offers robust functionality and reliability. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Min. tool height: 592 mm Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Injection pressure: 1,910 bar MACHINE DETAILS Bsdsxuqbropfx Adxsww Net weight (including control cabinet): 62 + 11 t Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Bwodpfx Aexl Ty Ejdxew Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Distance between bars 800x710 mm Size of mold platens 1200x1100 mm This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding Bwedpfoxpkmdsx Adxjw

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Bsdoxup T Hopfx Adxeww Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Bwedpfx Ajxup Siedxjw Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 90 mm, clearance between the columns: 1,000 mm, injection pressure: 1,742 bar, opening stroke: 2,000 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 356 kN Feed force of the moving opening platen: 98 kN Force of the moving closing platen: 92 kN Platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Bodpfx Adsxup Nnsxjww Mold opening stroke: 1,400 mm Minimum mold height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg Operating hours: 70,000 h