Injection molding machine

Arburg 1200T 1000-290

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg Chedpfezvm Azox Ad Ioc

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves Chjdoznd Dyspfx Ad Ioc - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Chodpfx Aexrf Nlod Iec

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements Csdpfxeyg I Ihs Ad Ishc • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor Chedpfxoyg I Egj Ad Iec • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Codpfxjt E Trhj Ad Ijhc

Year of construction: 2006, condition: used, Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible. Chodpfxjzun Uvs Ad Ijc

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Codpfx Asztzqzsd Ishc

Condition: excellent (used), Year of construction: 2006, _M 46_ _Engel VC 1050/220 HL_ Clamping force: 220 t Year of manufacture: 2006 Control system: CC 200 Screw diameter: 55 mm Screw type: POM Min. mold height: 300 mm Max. opening stroke: 750 mm Chsdpszu R H Usfx Ad Ijc Max. platen distance: 1,050 mm Ejector stroke: 180 mm Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×