Used Plastic Injection Machine for sale (68,191)

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Crodpszna T Rsfx Aqvsi

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Credpfx Aqex Nhy Rsvsi

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: 167988, total length: 5,360 mm, total width: 1,610 mm, total height: 1,950 mm, overall weight: 6,750 kg, Equipment: documentation/manual, Arburg 520 M - 2000 - 675 Details Manufacturer: Arburg Type of machine: 520 M - 2000 - 675 Year: 1998 Delivery time: Now Terms of Delivery: Ex Works Location: Dokkum, Netherlands Control version: Multronica Screen text: German / English Operating hours: 28,000 hrs Price: On request Technical details Clamping unit Clamping force: 2,000 kN Size of mold platens (h x v): 715 mm x 715 mm Distance between tie bars (h x v): 520 mm x 520 mm Mold opening stroke: 650 mm Mold height min.: 250 mm Max daylight: 900 mm Codpfo Ahn Exox Aqvjri Hydraulic ejector - stroke: 225 mm Ejector force forward/backward: 65 kN Injection unit Screw diameter: 60 mm L/D ratio: 16.5 Injection pressure: 1400 bar Stroke volume: 508 ccm Shot weight, PS: 427 g Injection rate: 310 ccm/s Injection stroke: 180 mm Nozzle pressure: 60 kN Electrical and Hydraulic Equipment Nominal capacity of pump motor: 30 kW Installed heating capacity: 18 kW Adjustable barrel heating zones: 6+1 Reservoir capacity: 260 ltr. Dimensions and weights Dimensions of the machine approx.: 5.36 m x 1.61 m x 1.95 m Total machine weight: 6,600 kg

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours, in near-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in near-new condition. It is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but, as part of the site relocation, has now been released for sale. The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000, including the crane. Please note: Items 10.0064 to 10.0070 (eFlomo) are not included in the scope of supply! This was not implemented. Everything else as per the order confirmation is fully installed in the machine. I can provide you with the technical data upon request. Included in the price: dismantling the crane and packing it onto two Europallets. Also, removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. Crodpewb Dl Tjfx Aqvji If you are interested or have any questions, please do not hesitate to contact me. The machine is located at the Nypro facility near Karlsruhe and can be inspected there. Delivery is possible within a few days. Below, in the documents, you will find the order confirmation from ENGEL to Nypro!

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm Crodjxzix Aopfx Aqvsi • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg Cedpfx As Afw Hyjqvjri

Condition: not inspected (used), Year of construction: 1996, Used ARBURG 221 M 250-55 plastic injection molding machine. Clamping force: 250 kN (25 tons). Year of manufacture: 1996. Equipped with two original control cabinets, without a display screen. Crode Ahzdkopfx Aqvsi Condition: Sold as is. Unique price: €1,000. Free loading onto your truck by our team.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. Cjde Ahkfkepfx Aqvsri TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Crsdpfx Ajywx Hqsqvoi Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 ccm Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mold mounting plates: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Credjzrngyspfx Aqvji Condition The machine is basically functional but requires repair or maintenance. Further information on the condition can be provided upon request. Sale Inspection possible by appointment Sale from our location Please contact us for further information, images or to arrange an inspection.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, ENGEL V 330H/80V/130 Combi Cleanroom – 2-component injection molding machine, manufactured in 2006. The machine comes from pharmaceutical production and is designed for cleanroom applications. Technical data: • 33,107 operating hours • Screw diameter 25/22 mm Cjdpst A Ui Asfx Aqvsri • Machine weight 10,600 kg Available additional equipment: • GEKU SR 500 ST robot • Safety cage • Rotary table • Conveyor belt Location: Schwaigern, Germany. Further technical documentation and an inspection can be arranged.

Condition: excellent (used), Year of construction: 2007, operating hours: 56,800 h, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition full service history still in production . The machine have one hydraulic core and one single air eject year 2007 . Credpfx Aqjzcwv Tevei

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Crjdpszd U Diofx Aqvji

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs Codpfxe Ahkh Ao Aqveri - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Crodpfxezcx Tms Aqvei

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) Crodpezqglrsfx Aqvsi - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, overall weight: 8,000 kg, Equipment: documentation/manual, We offer a ready-to-use Arburg ALLROUNDER 520 C 2000-675 injection molding machine, manufactured in 1996. Manufacturer: Arburg Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1996 Cedpfx Aqj Ah Rrwsvsri Condition: Ready for operation Machine type: Injection molding machine If you have any questions or require further information, please send us a message or contact us by phone. The machine is sold without warranty.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1510 x 1370 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 48 kN Injection unit: Screw diameter 80 mm Ls/D ratio 22,5 Injection pressure 2205 bar Stroke volume 1810 ccm Shot weight (PS) 1647 gr. Injection rate 498 ccm/s Screw speed 195 1/min Plasticising rate max. 106 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,50 x 3,00 x 2,70 m Total machine weight 35000 kg Accessories: - Anti vibration pads - 10-fold water regulator - Krauss Maffei Robot LRX250 X: 900 mm Servo Y: 1000/1000 mm Servo Z: 3500 mm Servo C: 0 - 90 ° Crodpfx Aqsz N E Eyevsi Additional Options: - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Robot interface according to Euromap 67 - 6 x hydraulic sequentional valves - 12 x hotrunner controller - 1 x Air valve

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Crsdey Au I Uspfx Aqvoi Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter Codpfsy Snapex Aqvori

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Codpo Afw Drefx Aqvori Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Cjdpjytgmvofx Aqvjri Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: good (used), Year of construction: 2026, functionality: fully functional, Brand: Dr. Boy GmbH & Co. KG Type: BOY 20E PRO Year of manufacture: 2026 Operating hours: < 50 Screw diameter: 22 mm Injection pressure (max.): 1732 bar Shot volume (max.): 30.4 cm³ Csdo Ahn U Sopfx Aqvjri Clamping force: 20 t Max. distance between tie bars: 254 mm Min. mould height: 200 mm Distance between platens (max.): 400 mm Dimensions: 2290 x 784 x 1673 mm Weight: 875 kg Options: • TEC package 1: wear protection & high temperature - High wear-resistant plasticizing unit (22 mm) - Ceramic high-performance heating bands - Insulation sleeves - Temperature control of the feed zone • Air ejection (1x) • Mould lighting • 4 freely programmable inputs/outputs • Oil filling (ISO-32 "EconFluid")

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 300-1400 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of Manufacture: 2019 Serial Number: 61032709 Machine Type: Hydraulic injection molding machine for plastics Clamping Force: 3000 kN / 300 tons Screw Diameter: 60 mm Control System: KraussMaffei MC6 Robot: KraussMaffei LRX100 Additional Equipment: Safety guard and conveyor Machine Description We offer a KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2019, with a clamping force of 3000 kN (300 tons), equipped with a KraussMaffei LRX100 linear robot, a safety guard, and a conveyor. The machine features a fully hydraulic clamping system and a modern KraussMaffei MC6 control system, based on an industrial PC with real-time Ethernet technology. The control system is equipped with an integrated 19-inch operator panel with a color touchscreen. The injection molding machine has a complete plasticizing unit for thermoplastics with a 60 mm diameter screw, a check valve, and an open nozzle. TECHNICAL DATA Clamping Unit Clamping Force: 3000 kN / 300 tons Mold Opening Force: 169 kN Platen Dimensions (H × V): 995 × 1050 mm Column Spacing (H × V): 630 × 630 mm Mold Opening Stroke: 820 mm Minimum Mold Height: 330 mm Maximum Distance Between Platens: 1150 mm Ejector Stroke: 200 mm Ejector Force (forward / backward): 58 / 28 kN Injection Unit Screw Diameter: 60 mm L/D Ratio: 20.8 Maximum Injection Pressure: 2006 bar Injection Volume: 679 cm³ Injection Weight: 618 g Injection Speed with Accumulator (option 70.25): 300 mm/s Volumetric Injection Capacity with Accumulator (option 70.25): 848 cm³/s Screw Speed: 260 rpm Nozzle Radius: 15 mm Nozzle Orifice Diameter: 6 mm Plasticizing Unit for Thermoplastics with Check Valve Electrical and Hydraulic Equipment Control System: KraussMaffei MC6 Operator Panel: 19-inch, color, touchscreen Rated Power of Pump Motor: 45 kW Installed Heating Power: 22.4 kW Dry Cycle Time / Stroke According to EUROMAP 6: 2.7 s / 441 mm Hydraulic Oil Tank Capacity: 720 l Csdj Ahx A Iopfx Aqvsri Robot and Additional Equipment Linear Robot: KraussMaffei LRX100 Safety Guard Conveyor for Receiving and Transporting Molded Parts Dimensions and Weight Length: 6150 mm Width: 2170 mm Height: 2250 mm Net Machine Weight with Control Cabinet: 12,200 kg / 12.2 t

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm Crjdpfx Aj Aggpasqvji • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.