Used Extrusion for sale (320)

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Hsdpfsd Sg Hcjx Ag Ueng Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Hodjx Rx D Aepfx Ag Ujng Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion Hsdpfox D Rgyex Ag Uong

Year of construction: 1999, condition: good (used), Brand: Hans Weber GmbH Model: ZE 20 Screw type: Single screw Year of manufacture: 1999 Screw diameter: 20 mm L/D ratio: 20 L/D Motor power: 3 kW Hnodpjx Ek Tlefx Ag Usg Control voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: approx. 300 kg Other: – Including swivel mounting arm – Including extra connection box

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Hedpfox Tvcbox Ag Ujng Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, with cooling bath, puller and winder with guiding device Hnodpfef Uc Ursx Ag Uog

Year of construction: 2000, condition: like new (used), stock-No.1919 Hnjdpfjb Aq Hpjx Ag Ueg complete set of extrusion-tools / calibrating parts , used but very good condition- very less operting hours, tools made in Germany ᐳ for the production of electric cable protection canals/ ducts, incl. punching unit to punch the fixing holes in the ready-made profiles

Condition: like new (used), Year of construction: 2023, power: 255 kW (346.70 HP), ø 5-50 mm; 30 m/min Hodpfx Ajuu H Emsg Ueng 1.5 Kw Core diameter 400-1100 mm, collar width 100-400 mm. Many extras

Condition: ready for operation (used), Year of construction: 2021, total height: 1,950 mm, overall weight: 350 kg, number of axes: 3, General Data Measurements width 940 mm Measurements depth 900 mm Measurements height 1950 mm Machine weight 350 kg Main Drive Number of axis 3 Hedox D Sqmjpfx Ag Usng Additional Equipment Double extrusion head per print module, equipped with a cleaning system for the print head to print complex geometry with soluble support. 3 print modules with different temperature specifications specially developed for the different materials. This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine. Application Types 3D Printing

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) Hedpfx Agjxpva As Ueng - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Hedpfxoxzfdbj Ag Ueng Stainless steel cooling tank Sheer dryer Sheer granulator

Condition: used, Year of construction: 2012, functionality: fully functional, Documented Modifications/Upgrades: Year Modification/Upgrade 2012 Installation of quadruple extrusion line no. 02 for individual treads 2012 Foundation for quadruple extruder no. 02 2012 Induction heating insert + die on quad. #02 2013 Expansion of extrusion tooling for profile/SW production 2014 2 compact asynchronous motors by Siemens 2017 Extruder screw 150 base quad 2 2019 Advanced closed-loop upgrade 2021 Advanced closed-loop upgrade Hjdpfx Agex Ithdj Usng 2022 New 200 mm screw for Troester extruder Control system: Modern control and visualization units (control panels, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance/Condition: Regularly modernized and upgraded 2012–2022 Accessories / Options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding devices

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled Hnedpfxsiyx Uzs Ag Usg You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality Hedpfxevyumyo Ag Usng • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system • Pipe diameter 14, 16, 18, 20 mm Hnjdpfx Asx I S N Heg Uog • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. • Axle height 1000 mm

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Hedpox Dip Tjfx Ag Ujng Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. Hnodpex Dkmgefx Ag Uog If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SICA-TRS 90-500 , PLANETARY TUBE SAW PLANETARY SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 100 mm Max diameter 500mm Year of construction 05-1994 Hodpexwd Spsfx Ag Uong Central clamp Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Hodpfxeiyynde Ag Ujng Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: good (used), Year of construction: 1999, operating hours: 17,620 h, Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Operating hours: 17,620 h Hnjdpjxx Tnpefx Ag Ujg Year of manufacture: 1999

Condition: refurbished (used), functionality: fully functional, EXTRUDER UNIT FOR BRICKS AND CERAMIC BLOCKS BRAND: BEDESCHI MODEL: SL 750 EXTRUDER DIAMETER: 750 mm (cylindrical) PRODUCTION CAPACITY: 120 tons/hour (at 12 bar pressure) SCREW ROTATION SPEED: 10 / 17 rpm (controlled by ABB ACS 800 VECTOR INVERTER – 693A Output) TRANSMISSION: DIRECT DRIVE WITH BREVINI PDL 702 GEARBOX (remanufactured) AXIAL RETENTION: SKF 29452 Series E (new) DISC CLUTCH (2 units) GENERAL REFURBISHMENT: Blades, linings, pins, seals, clutch discs, paddle shaft bearings, blade sets, axial bearings, vacuum chamber lining (stainless steel), bearings for electric motors Operational test performed, painted and aesthetically finished. COMPLETE WITH: • HYDRAULIC OIL SYSTEM FOR GEAR SHIFT, FILTER, DEGASSER OPERATION • 2 WEAR-RESISTANT METAL-PLATED FILTERS FOR HOLES • CENTRALIZED LUBRICATION UNIT WITH FILTER • DISC CLUTCH (FOR EXTRUDER + DEGASSER) • ORIGINAL BEDESCHI DRIVE BELTS (FOR BOTH UNITS) • EXTRUSION MOTOR 315 KW, 6-POLE (original Bedeschi) • DEGASSING MOTOR 75 KW, 6-POLE • MOTOR LUBRICATION UNIT • VACUUM GROUP MOTOR 30 KW, 4-POLE • MAIN DRIVER ASSEMBLY WITH BELT TENSION ADJUSTMENT GUIDES • EXTRUDER BASE FRAME • DEGASSER UNIT • INLET PULLEY SUPPORT • DEGASSER WITH 2 COUNTER-ROTATING SHAFTS WITH PADDLES (VACUUM CHAMBER) • SLEWING JIB CRANE (original Bedeschi) with electric hoist ACCESSORIES INCLUDED IN THE SALE 1- 3 DIE HOLDERS BY TECNOFILIERE (ITALY) 2- 1 FLANGE WITH BOLTS FOR 2 SIMULTANEOUS DIES 3- 1 ABB ACS 800 INVERTER CABINET (extruder motor) 4- 1 OIL VACUUM PUMP UNIT 30 KW 5- 1 400L VACUUM STORAGE TANK MORANDO LV 8/12 HIGH-SPEED ROLLER MILL (refurbished) TECHNICAL SPECIFICATIONS Original manufacturer: MORANDO IMPIANTI Type: HIGH-SPEED ECCENTRIC PRESS, ELECTRONIC ACTUATION Cylinder width: 1200 mm Cylinder diameter: 800 mm Complete with: • Original Morando base platform • 01 complete spare roll for quick replacement (bearings, shaft, pulley) • Original Morando material inlet cover • Hydraulic control unit for structural load management • Servo-driven rolling gap calibration system • Original Morando documentation Mantle Condition Fast roll: 80% Hedpfx Agjx U Ukae Ueng Slow roll: 60%

Year of construction: 2017, condition: excellent (used), Category: Twin-screw extruder Number: DE27686 Manufacturer: Berstorff Type: ZE 25 Year of manufacture: 2017 Capacity: 10 – 50 kg/h (depending on material) Screw diameter: 2 x Ø 25.1 mm L/D: 47:1 Motor: 14.5 kW Control: Siemens Details: Co-rotating, segmented screws and barrels, degassing, vacuum pump, 1x side feeder The laboratory extruder is in excellent condition and can be inspected at any time at our premises in Haan/Düsseldorf. Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry – we have suitable options for almost every budget in our portfolio. Hnedpfx Agox A Evas Ueg

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Cincinnati PAK 600 Extruder Specifications The Cincinnati PAK 600 is a single-screw extruder designed for high-throughput plastic processing applications. • Drive System: Requires two electrical drops—one for the control cabinet and another for the drive cabinet. • Electrical Load: Maximum amp load depends on the standard AC motor & drive, as well as the number of barrel and die zones. Electrical engineering will determine the exact amp load based on specific configurations. Hnsdpfxewm Ngys Ag Ujg • Operational Rating: Rated at a service factor (SF) of 1.0 at 1750/100 rpm.

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Hnsdsiyyf Ijpfx Ag Uog Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Hnsdpoi Dtbisfx Ag Usg Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.