Used Extruder Shaft for sale (6,358)

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Rcsdpfozylxiex Akijh Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle -extruder 600/560 Händle and Mixer MDV920b Rjdjzmxi Ujpfx Akisch -filermixer Händle -roller mill 800x800 Händle WFZ880a - conveyer 40m x 80 cm gummi

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. Rcodpfjzti Tksx Akioh This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Shaft length: 1800mm 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Rjdpfx Aoz Rmt Uokiech Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. This shredder has always been used for shredding car tires.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Rodpo Agvygefx Akiech Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper Rcsdpowivdkefx Akijh mold is not included EXCELLENT CONDITION

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine. Rjdpjzxxifofx Akiech

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Rcsdpez Dt Spjfx Akijh Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Rcjdpfx Akoz Eh Iheijh Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR210 ± 120L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 15 Kw - 970 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 300L Single mixing shaft execution with adjustable paddles Motor 3 Kw Extruder BR210 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Rodsz Rl Ecopfx Akiech Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm without electric cabinet and controls

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Rcjdjx Apckspfx Akish

Condition: like new (used), Year of construction: 2019, operating hours: 706 h, functionality: fully functional, Exellent condition, can be seen working Rjdpfx Akoz Hdi Dsisch

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, 2 Kowin 232 extruder pelletizing lines for sale one brand new 2024, second 2011 good working conditions output capacity 275Kg per H Rsdpfx Akjz D T Nbjijch genuine reason for selling

Condition: used, Year of construction: 1999, A complete extrusion line is available, equipment: 5x control cabinets, 1x frequency inverter for the main drive, 1x frequency inverter for ZSB/heating, 1x PLC control system, 1x feeder, 1x vibrating screen with Congrav, 2x pre-feeders from Brabender, 2x gravimetric feeders from Brabender, 1x volumetric feeder from Brabender, 1x Coperion ZSK 58 Mc twin-screw extruder, 1x ZS-B 58, 1x frequency inverter cabinet, 1x SL cabinet with Siemens S7-300 control system, 1x local control cabinet at the machine with integrated EPC NT operator terminal with LM3 from Brabender, 1x cooling unit, 1x complete strand pelletizing system, 1x classifying screen with extraction system, 1x pair of spare screw shafts with screw elements, material 15, unused, total weight of the system: 5.843t, with documentation. An on-site inspection is possible. Rodpfx Ao Aa Aldjkisch

Condition: used, Used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Rcsdpfx Ajzfh Uqjkieh This unit is ready to run. A video of this mixer is available below. Specifications: Capacity: 190 Litre Material of Construction: Stainless Steel Type Of Blades: 2

Condition: used, functionality: fully functional, Used Lehmann UMT extruder. Suitable for a wide range of applications including food, biogas, substrates, wood fibre, and more. Contact for further information. Redpfx Aeyxfg Tekiech

Condition: used, Manufacturer : Clextral Rcodpfxjy Abclo Akish Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels Rcsdpfxeycuuyj Akish • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Rcjdpjw U Txujfx Akijh Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: excellent (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet Rods Ad N Rnspfx Akijch - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 03)  Wet concrete capacity: 3 m3  Dimensions (length x width x height): 2300 x 4090 x 2750 mm  Feeding capacity: 4500 lt  Fresh concrete capacity: 3750 lt  Compacted concrete capacity: 3000 lt  Motor power: 2 x 55 kW  Hydraulic discharge gate  Automatic lubrication Redpfxsz Hby Tj Akioch FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 02)  Wet concrete capacity: 2 m3  Dimensions (length x width x height): 2000 x 3400 x 2450 mm  Feeding capacity: 3000 lt Rcedpfx Akoz Hbwxoijh  Fresh concrete capacity: 2500 lt  Compacted concrete capacity: 2000 lt  Motor power: 2 x 45 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design Rcsdpezulh Tefx Akish The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: used, functionality: fully functional, Cooling fans for extruder Manufacturer: Karl Kein Ventilatorenbau Condition: used and tested different models Rjdpfj Af Ip Iex Akisch TOTAL PRICE: EUR 500,00

Condition: used, Year of construction: 2011, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, power: 30 kW (40.79 HP), input voltage: 400 V, filling opening width: 1,350 mm, filling opening length: 1,035 mm, Used DECOVAL 4-shaft industrial shredder (Year 2011). Designed for efficient processing and shredding of plastic waste materials. Heavy-duty 3.25-ton machine equipped with two 11 kW shredding motors and two 4 kW pusher/feeder motors (total power 30 kW). Operated by a Siemens LOGO PLC, which controls automatic reverse/anti-jamming cycles. Comes complete with the original, comprehensive technical operation and service manual. Rcedpozqy Hisfx Akioh